• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.21 no.5
• /
• pp.659-669
• /
• 1997

The effects of exhaust gas recirculation on diesel engine combustion and soot/NOx emissions are numerically studied. The primary and secondary atomization is modelled using the wave instability breakup model. Autoignition of a diesel spray is modelled using the Shell ignition model. Soot formation is kinetically controlled and soot oxidation is represented by a model which account for surface chemistry. The NOx formation is based on the extended Zeldovich NOx model. Effects of injection timing and concentration of $O_{2}$ and CO$_{2}$ on the pollutant formation and the combustion process are discussed in detail.

• Journal of Power System Engineering
• /
• v.9 no.3
• /
• pp.10-14
• /
• 2005

The Effects of cooled and hot EGR(exhaust gas recirculation) on the characteristics of smoke and NOx emission have been investigated using a single cylinder, water-cooled, four cycle, DI diesel engine at several loads and speeds. In this study, a manually controlled EGR system was installed on a agricultural diesel engine which was operated at various operating system. And, the effects of hot EGR and cooled EGR on smoke and NOx emission were compared. The results showed that cooled EGR method was more effective than hot EGR method on smoke and NOx emission.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2019.05a
• /
• pp.315-315
• /
• 2019

증산과 증발의 합으로 나타내지는 증발산은 지구내에서의 수문 순환에 영향을 미치는 중요한 인자로써, 지표와 대기의 에너지 교환을 담당하고 있다. 정확한 관측을 위해서 오래전부터 증발산에 대해서 관측하기 위하여 직접관측 방법들인 증발산계를 이용한 관측방법, 에디 공분산 방법을 이용한 플럭스타워 관측 방법 등을 사용하였으며, 물리 및 경험적인 방법인 Penman (1948), Monteith (1965) 방법, PT (Priestley and Taylor, 1972) 방법 등을 이용함으로써 증발산과 관계를 가진 수문기상인자를 이용함으로써 증발산에 대해서 추정하여 왔다. 대부분 지상 관측에 의존하기 때문에 시공간적인 값의 표현이 어렵다는 문제를 가지고 있으며, 관측 장비의 관리 및 유지비용이 증대로 인하여 조밀한 관측망을 구축하기 어렵다. 이러한 단점을 개선하고자 인공위성 및 재분석 자료를 활용하여 여러 경험식을 통해서 증발산 자료가 제공되고 있다. 그러나 이러한 자료들의 문제점은 각기 다른 경험식 및 다른 입력자료를 제공하고 있을 뿐만 아니라, 자료별 지역별 정확성이 차이가 발생한다. 따라서, 최근 연구에서는 지점자료와 인공위성 자료 및 재분석 자료를 모두 사용함으로써 수문기상인자를 개선하고자 하는 연구가 진행되어왔으며, 정확성 또한 개선된 것을 확인 할 수 있다. 그러나, 이러한 방법들의 가장 큰 문제점은 관측 자료가 필수적으로 필요하다는 것에 있다. 대부분의 나라나 지역에서는 조밀한 구축망을 구축하기 어렵기 때문에 실질적으로 적용하기가 어렵다는데 있다. 따라서 본 연구에서는 이러한 문제를 해결하기 위하여 지점자료가 필요없는 융합방법을 triple collocation 방법을 이용함으로써 제안하고자 한다.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2021.06a
• /
• pp.315-315
• /
• 2021

저영향개발은 녹색 기반시설을 이용한 침투, 여과, 저류, 지체 등의 효과를 달성하는 구조적 방식과 집중된 우수 배제 방식을 분산시키는 비구조적 방식이 있다. 국내에서는 저영향개발을 주로 시범사업 수준에서 침투트렌치, 식생수로, 투수성 포장과 같은 일부의 요소기술만 적용하고 있는 실정으로, 비구조적 방법을 이용한 분산식 우수배제 방식을 도입한 사례는 거의 없다. 본 연구에서는 PCSWMM을 이용하여 송산 그린시티 개발 사업에 기존의 집중형 우수 배제 방식과 비구조적 방식을 포함한 저영향개발을 각각 도입하여 홍수 및 침수 저감 효과를 검토하였다. 본 연구에서는 송산 그린시티에 저영향개발 기법을 고려하면서 기존 4개의 주 수로에 2개의 소규모 수로를 추가적으로 고려하였다. 또한, 우수관거는 연장이 길어짐에 따라 관거의 규모가 커지므로 유역 유출부에 인접한 지역은 직접 우수 배제가 되도록 하였고, 우수의 배제 방향을 분산시킴으로써 관거의 규모가 비대해지지 않도록 하였다. 홍수 및 침수 저감 효과는 50년 빈도 확률 강우량과 100년 빈도 확률강우량을 적용하여 검토하였다. 그 결과, 적용된 집중형 우수 배제 방식의 경우에는 50년 빈도 확률강우량 조건에서 48 ha, 100년 빈도 확률강우량에서는 81 ha가 침수되는 것으로 모의가 되었다. 반면, 분산형 우수배제 방식을 포함한 저영향개발을 반영할 경우, 50년 빈도 확률강우량에서 6 ha, 100년 빈도 확률강우량 조건에서는 18 ha가 침수되는 것으로 모의가 되었다. 즉, 분산형 빗물관리를 계획함에 따라 홍수 저감의 효과가 나타나는 것으로 분석되었다.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.24 no.3
• /
• pp.390-401
• /
• 2000

In this study, numerical calculation is carried out to investigate the influence of injection timing, fuel amount, intake $O_2$ concentration, and EGR on Nitric Oxide(NO) formation using a two-zone model in a diesel engine. Results can be summarized as follows. The NO formation is very sensitive to the burned gas temperature, so multi-zone model must be applied to combustion process to predict the burned gas temperature exactly. Since the burned gas temperature increases rapidly during the premixed combustion, most NO is formed within 20 crank angle degrees after ignition. As the injection timing is retarded, the combustion occurs later in the expansion process which causes the decrease of burned gas temperature and, as a result, NO formation decrease. The increase of fuel amount results in the increase of earlier formation of NO in the engine. As the intake $O_2$ concentration increases, the maximum pressure and burned gas temperature increase due to activate combustion. And, [O] mole fraction of equilibrium combustion products also increase. Therefore NO exponentially increases. If exhaust gas is recirculated, the burned gas temperature decreases which results in NO decrease. If exhaust gas is cooled, more NO can be decreased.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2016.05a
• /
• pp.10-14
• /
• 2016

육상의 증발산량(evapotranspiration, ET)은 대기 중 수증기의 상변화를 통해 대기와 지표 사이의 물과 에너지 순환에 영향을 미치며, 강수량, 유출량과 함께 수자원에 영향을 미치는 주요 인자이다. 강수량과 유출량은 직접 관측이 가능한 반면, 증발산량은 숨어있는 잠열로서 관측하기 어렵다. 플럭스 타워나 라이지메타(Lysimeter) 등을 이용하여 증발산량을 직접 관측하고 있으나 이들 지상관측은 일부 지점(point)에서 제한적으로 이루어지고 있으며, 관측 지점의 수를 확대하게되면 관측 기기의 유지 보수 등의 많은 시간과 비용이 든다는 한계가 있다. 이러한 지상관측의 한계를 극복하고 넓은 영역의 증발산량 변화를 관측하기 위해 위성을 이용한 증발산량을 추정하는 연구가 활발히 진행되고 있다. 기상청 국가기상위성센터(National Meteorological Satellite Center, NMSC)에서는 우리나라 최초의 정지 기상 위성인 천리안 위성(Communication, Ocean and Meteorological Satellite, COMS) 자료를 지표 에너지 수지식(Surface Energy Budget Equation)에 적용하여 동아시아 지역의 지면과 식생 특성을 반영한 '일(daily) 증발산량 산출 알고리즘'을 개발하였다. 현열을 계산하기 위해 다양한 입력 변수가 사용되어지고 계산 과정이 복잡하기 때문에, 본 연구에서는 '반 경험적인 계수인 B 계수 모델'을 사용하여 현열 산출 기법을 단순화하였다. 본 알고리즘을 이용하여 2011년 4월부터 현재까지 동아시아(위도 $20{\sim}50^{\circ}N$, 경도 $100{\sim}145^{\circ}E$)의 해상도 1km의 일 증발산량을 산출하였고, 위성 증발산량의 검증을 위해 지면 특성이 다른 청미천(농경지), 설마천(혼효림) 지역의 플럭스 타워 증발산량 자료(유량조사사업단 제공)와 비교 분석하였다. 2011년 4월부터 2014년 12월까지 청미천 지역에서의 플럭스 타워 관측과 비교한 결과, 총 665개 자료에 대하여 RMSE는 2.82 mm/day, Bias는 2.56 mm/day의 결과를 보였다. 동일한 기간에 대하여 설마천 지역에서의 플럭스 타워 관측과 비교한 결과, 총 582개 자료에 대하여 RMSE는 1.92 mm/day, Bias는 1.45 mm/day의 결과를 보였다. 기상청 국가기상위성센터의 위성증발산량이 봄과 가을철에 다소 높게 산출되는 경향이 있었으나, 증발산량의 변화경향은 유사하게 나타났다. 이러한 결과를 바탕으로 동아시아 지역 위성 증발산량 변화를 감시하고 있으며 향후, 수문 및 기후 분야에서 가뭄 모니터링 등의 연구에도 활용할 수 있을 것이다.

• Journal of Wetlands Research
• /
• v.19 no.3
• /
• pp.259-270
• /
• 2017

In this study, field-scale half-saturated bio-filter wetland equipped with recirculation system was operated with stormwater from the paved road, and its operational performance and functions of LID-BMP were analyzed and compared with other facilities. The reduction of TSS, COD, TN, and TP were 92%, 63%, 36%, and 75%, respectively. Comparison of the reduction efficiency were carried out with respect to ratio between surface and catchment areas(SA/CA). In addition, this LID-BMP facility can reduce about 70% of pollutant by treating only 18% of total rainfall runoff. The results show that LID used for this study gave similar efficiency although its ratio was smaller. In addition, comparison study was made between synthetic fiber as a filter media and organic media, which shows that there was not any significant difference between, TSS and TP reduction, but there were large difference in COD and TN removal due to the presence and absence of release of organic carbon. Meanwhile, wetland system in this study equipped with a first-flush capture gave a higher stability in terms of treatment performance.

• Journal of Korean Society of Forest Science
• /
• v.89 no.5
• /
• pp.564-575
• /
• 2000

This study was carried out to reveal characteristics of long-term runoff by using HYCYMODEL in a small forested watershed. From May to September in 1998 and in 1999, the fitness of HYCYMODEL and runoff characteristics were estimated by HYCYMODEL using rainfall and discharge at the experimental watershed. The function of stage and discharge in the experimental watershed was determined as following equation $Q=11.148H^{2.5867}$($R^2=0.9956$). From May to September in 1998 and in 1999, the runoff rates were 57.7% in 1998 and 87.1% in 1999 at the experimental watershed. The discharge was assumed to be increased because of rainfall intensity difference and thinning. By applicability test, the HYCYMODEL showed good estimation of runoff by optimized fifteen parameters. Comparing runoff characteristics before and after thinning by calculating through HYCYMODEL, direct runoff and base runoff increased 4%, 7%, respectively as evapotranspiration decreased 11%. Parameters $D_{50}$ and $K_h$, which were related to the direct run, and a parameter $K_u$, which was related to the baseflow, were assumed to indicate that forest was changed by the effect of thinning and weathering process of bed rock.

• Journal of the Korean Recycled Construction Resources Institute
• /
• v.5 no.3
• /
• pp.298-304
• /
• 2017

The corrosion of reinforcements embedded in concrete causes some durability problems in reinforced and prestressed concrete structures. The epoxy coated reinforcements are one of the effective and reliable methods to prevent corrosion of reinforcements. However, it has been known that the epoxy coating reduces the bond capacity of reinforcement to concrete. This paper investigates the bond behaviors of epoxy coated reinforcements experimentally using direct pull-out test. Bond behaviors of epoxy coated bars for various reinforcement diameters of 10, 19 and 29mm and thicknesses of cover concrete of 1, 2, 3, and $4.5c/d_b$ (ratio of cover to bar diameter) are examined. Total 66 specimens were manufactured and tested according to the RILEM standard method. As the diameters of the epoxy coated reinforcements increase, the difference of bond strength between epoxy coated reinforcements and uncoated bars also increases. Epoxy coated bars showed more than 85% bond performance compared to those of uncoated bars. A new formular for estimating basic development length of epoxy coated reinforcement based on equilibrium equation is proposed using this experimental result.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.4 no.4
• /
• pp.113-125
• /
• 1984

Water supply has been mainly dependent on the construction of the dams in Korea. It is difficult, however, to continue to construct dams for many reasons, such as the decrease of construction sites, the increase of construction costs, the compensation of residents in flooded areas, and the environmental effects. Water demands have increased and are expected to continue increasing due to the concentration of people in the cities, the rise of the living standard, and rapid industrial growth. It is acutely important to find countermeasures such as development of ground water, desalination, and recycling of waste water to cope with increasing water demands. Recycling waste water includes all means of supplying non-potable water for their respective usages with proper water quality which is not the same quality as potable water. The usages of the recycled water include toilet flushing, air conditioning, car washing, yard watering, road cleaning, park sprinkling, and fire fighting, etc. Raw water for recycling is obtained from drainage water from buildings, toilets, and cooling towers, treated waste water, polluted rivers, ground water, reinfall, etc. The water quantity must be considered as well as its quality in selecting raw water for the recycling. The types of recycling may be classified roughly into closed recycle systems and open recycle systems, which can be further subdivided into individual recycle systems, regional recycle systems and large scale recycle system. The treatment methods of wastewater combine biochemical and physiochemical methods. The former includes activated sludge treatment, bio-disc treatment, and contact aeration treatment, and the latter contains sedimentation, sand filtration, activated carbon adsorption, ozone treatment, chlorination, and membrane filter. The recycling patterns in other countries were investigated and the effects of the recycling were divided into direct and indirect effects. The problems of water reuse in recycle patterns were also studied. The problems include technological, sanitary, and operational problems as well as cost and legislative ones. The duties of installation and administrative organization, structural standards for reuse of water, maintenance and financial disposal were also studied.