• Proceedings of the Korea Water Resources Association Conference
• /
• 2004.05b
• /
• pp.376-380
• /
• 2004

측벽이 존재하는 개수로 난류흐름에 대한 DNS 자료를 이용하여 난류의 비등방성을 해석하였다. 측벽의 2등분선(sidewall bisector)에서 난류강도의 분포를 통해 바닥과 자유수면에서의 비등방성을 분석하고, AIM을 도입하여 흐름장 전반에 걸쳐 세부적인 비등방성 해석을 수행하였다. 측벽의 2등분선에서의 난류강도의 분포를 통해 바닥과 자유수면 근처에서 난류강도가 강한 비등방성을 갖는 것을 볼 수 있었다. 또한 3개의 다른 영역에서 AIM의 도입을 통해 측벽이나 바닥근처에서는 난류의 비등방성이 구형 관수로 흐름과 유사한 것으로 나타났으나, 개수로 난류흐름의 주된 특성이 velocity-dip phenomena가 존재하는 영역에서는 구형 관수로 흐름과는 달리 천이영역이 존재한다는 것을 알 수 있었다.

• Journal of the KSME
• /
• v.25 no.2
• /
• pp.153-157
• /
• 1985

치차의 마찰손실은 일반적으로 낮으나, 치면의 온도상승을 초래하여 마멸을 증대시키거나 치면의 강도를 저하시킨다. 이것은 결과적으로 치차의 강도(부하특성)에 직접적인 관계를 갖고 있기 때문에 마찰손실을 가능한 한 낮게 유지하여야 한다. 치차의 맞물림은 치면의 미끄름속도 미 끄름율, 곡율반경 및 하중이 맞물림중에 순간적으로 변하므로 해석이 간단하지 않다.

• Journal of the Society of Disaster Information
• /
• v.9 no.4
• /
• pp.400-412
• /
• 2013

For the composite behavior of steel tube and inner concrete, the shear connectors should be applied to the CFT structures. However, the present design codes don't provide the design criteria that can be applied on shear connectors in the CFT structures typically filled with plain concrete. This study has been carried out to propose design criteria (shear strength and resistance factor) for the stud shear connectors in CFT structures. Experimental tests using the push-out specimens with the plain concrete blocks and finite element analysis were conducted for the purpose of verifying the main failure mode to propose the shear strength of studs in CFT structures. From the results of this study, the main failure mode of studs in CFT structures is splitting crack of concrete and this failure mode reduces shear strength of studs in CFT structures relatively to those embedded in RC blocks.

• Journal of Korean Society of Steel Construction
• /
• v.16 no.2 s.69
• /
• pp.181-190
• /
• 2004

A new inelastic design method performing iterative calculations using secant stiffness was developed. Since the proposed design method uses linear analysis, it is convenient and stable in numerical analysis. At the same time, the proposed design method can accurately estimate the inelastic strength and ductility demands of the members by performing iterative calculation. In the present study, the procedure of the proposed design method was established. Design examples using the proposed method were presented, and its advantages were highlighted by comparisons with existing design methods using elastic or plastic analysis. Unlike the existing inelastic design methods performing the preliminary design on the structure and checking its validity using nonlinear analysis, the proposed integrated analysis-design method can directly calculate the strength and ductility demands of each member. In addition, the proposed design method can address the inelastic design strategy intended by the engineer, such as strength and ductility limits of members and the design concept of strong-column and weak-beam. As a result, economical and safe design can be achieved.

• Journal of the Earthquake Engineering Society of Korea
• /
• v.8 no.1
• /
• pp.17-27
• /
• 2004

A new earthquake design method performing iterative calculations using secant stiffness was developed. The proposed design method has the advantages of convenience and stability in numerical analysis because it uses elastic analysis. At the same time, the proposed design method can accurately estimate the strength and ductility demands on the members because it performs the analysis on the inelastic behavior of structure using iterative calculation. In the present study, the procedure of the proposed design method was established, and a computer program incorporating the proposed method was developed. Design examples using the proposed method were presented, and its advantages were presented by the comparisons with existing design methods using elastic or inelastic analysis. The proposed design method, as an integrated method of analysis and design, can address the earthquake design strategy devised by the engineer. such as ductility limit on each member, the design concept of strong column - weak beam, and etc. In addition, through iterative calculations on the structure preliminarily designed only with member sizing, the strength and ductility demands of each member can be directly calculated so as to satisfy the given design strategy. As the result. economical and safe design can be achieved.

• Journal of the Korean GEO-environmental Society
• /
• v.11 no.2
• /
• pp.13-21
• /
• 2010

The unsaturated slope usually is stable for a long time, but fails during heavy rainfall. And the factors of the rainfall intensity exhibit significant roles because the water content and the shear stress developed along the potential failure surface will be changed by the rainfall intensity. The objective of the study presented in this paper is to analyze the relationship between rainfall intensity and shear stress of the soil slopes by applying the laboratory slope model apparatus and undrained direct shear test with rainfall intensity controlled. The soil sample was taken from the field slope of Youngdong, and particle size analysis was done. To look over the relationship between rainfall intensity and shear strength of slope, the three-dimensional relationships among shear strength, normal stress and water content of the slope soil samples are examined; those are based on the data from the TDR sensor and undrained direct shear test.

• Proceedings of the Korean Society of Propulsion Engineers Conference
• /
• 1997.11a
• /
• pp.20-20
• /
• 1997

고강도 알루미늄 대형 링롤재를 급냉할 때 발생하는 잔류응력을 2차원 및 3차원 유한 요소 해석하였고, 3단계 절단법에 의해 측정된 변형율과 ABAQUS의 요소제거 기능을 이용한 해석 값을 직접 비교하였다. 급냉후 잔류응력 해석결과는 2단과시효 후 측정값과 비슷한 경향을 보였으나 그 절대값의 차이가 크게 나타났다 이는 시편 링의 높이가 작아 실험 값이 부정확하였기 때문이며 링의 높이를 증가시켜 높이방향으로 균일한 응력분포를 갖도록 하면 그 차이가 감소될 것으로 판단된다. 잔류응력을 측정하는 3단계 절단 과정을 모사한 3차원 해석결과와 측정된 변형율을 직접 비교함으로써 실험과 해석의 정확성을 향상시킬 수 있도록 하였다. 이로부터 잔류응력이 존재하는 일반적인 알루미늄 구조물의 기계가공에 의한 변형을 정확히 예측할 수 있는 기반을 마련하였으며 구조해석 시 잔류응력의 영향을 고려할 수 있게 되었다.

• Journal of Korean Society of Steel Construction
• /
• v.24 no.2
• /
• pp.189-197
• /
• 2012

The cold-formed steel stud, which has been used as a load-bearing member of wall panels for steel houses, poses a significant problem in insulation due to heat bridging of the web. Therefore, some additional thermal insulating materials are required. In order to solve this problem, the cold-formed steel thermal stud with slits in the web was developed. However, estimating the structural strength of thermal studs is very difficult because of the arrangement of perforations. In this paper, an analytical and experimental research on thermal studs is described. Three types of studs with different length, pitch and arrangement of slits were tested to failure. A simple design approach was proposed based on the test results. The proposed method adopted the direct strength method, based on the elastic local and distortional buckling stress of plain studs with equivalent thickness in the web instead of thermal studs. The predictions using the proposed method were compared with test results for verification and the adequacy of the proposed method was confirmed.

• Journal of Welding and Joining
• /
• v.10 no.4
• /
• pp.44-57
• /
• 1992

본 보에서는 용접 구조물의 파괴 방지를 위한 제반 용접 구조 설계에 대하여 전반적으로 기술 하였다. 현대 용접 구조물의 각 선급이나 spec.에서 규정한 식들에 의해 산정된 정적하중으로 구조 설계되는 종래의 방법과는 달리, 유한 요소 구조 해석에 의한 강도 평가, 외부하중의 직접 계산에 의한 보다 정확한 설계 하중의 설정 및 통계적 처리를 통한 합리적인 구조해석(피로강도 포함)등으로 설계되고 있다. 더우기 구조설계시 구조물의 취성파괴를 고려한 파괴강도 및 인성 개념을 도입하였을 뿐 아니라 균열의 존재와 성장을 파괴 역학적으로 해석하여 구조물의 조업 중에서의 파괴관리 및 제어도 실시할 수 있는 총합적인 설계에 의하여 용접 구조물은 제작되고 있다. 비록 구조물의 총합적인 구조 설계로 제작되었을지라도, 구조물의 사용 성능은 용접부의 특성에 의하여 크게 변하게 되므로 용접 설계의 역할을 매우 중요하다. 용접 설계란 용접시공법, 구조부재 및 용접재료의 선정, 용접 이음부의 구조적 형상과 세부 형상 및 그외 용접에 관련된 제 인자들을 상호 유기적으로 조합함으로써 보다 경제적이고 신뢰성 있는 용접부를 얻고자 함에 그 목적이 있다.

• Journal of Korean Society of Steel Construction
• /
• v.22 no.3
• /
• pp.219-228
• /
• 2010

This paper describes an experimental research on the structural behavior and the ultimate strength of longitudinally stiffened plates subjected to local, distortional, or mixed-mode buckling under compression. The stiffened plate undergoes local, distortional, or interactive local-distortional buckling according to the flexural rigidity of the plate's longitudinal stiffeners and the width-thickness ratios of the sub-panels of the stiffened plate. A significant post-buckling strength in the local and distortional modes affects the ultimate strength of the longitudinally stiffened plate. Compression tests were conducted on stiffened plates that were fabricated from 4mm-thick SM400 steel plates with a nominal yield stress of 235MPa. A simple strength formula for the Direct Strength Method based on the test results was proposed. This paper proves that the Direct Strength Method can properly predict the ultimate strength of stiffened plates when the local buckling and distortional buckling occur simultaneously or nearly simultaneously.