Journal of Korean Society of Steel Construction (한국강구조학회 논문집)

Korean Society of Steel Construction (한국강구조학회)
권호 표지

The Compressive Strength of Longitudinally Stiffened Plates Undergoing Local and Distortional Buckling

국부좌굴과 뒤틀림좌굴이 발생하는 종방향 보강재로 보강된 강판의 압축강도

  • 박호상 (평화엔지니어링 토목구조사업부) ;
  • 서상정 (영남대학교 건설환경공학과) ;
  • 권영봉 (영남대학교 건설환경공학과)
  • Received : 2010.03.12
  • Accepted : 2010.05.24
  • Published : 2010.06.27
Download PDF
⟨ Previous Next ⟩

Abstract

This paper describes an experimental research on the structural behavior and the ultimate strength of longitudinally stiffened plates subjected to local, distortional, or mixed-mode buckling under compression. The stiffened plate undergoes local, distortional, or interactive local-distortional buckling according to the flexural rigidity of the plate's longitudinal stiffeners and the width-thickness ratios of the sub-panels of the stiffened plate. A significant post-buckling strength in the local and distortional modes affects the ultimate strength of the longitudinally stiffened plate. Compression tests were conducted on stiffened plates that were fabricated from 4mm-thick SM400 steel plates with a nominal yield stress of 235MPa. A simple strength formula for the Direct Strength Method based on the test results was proposed. This paper proves that the Direct Strength Method can properly predict the ultimate strength of stiffened plates when the local buckling and distortional buckling occur simultaneously or nearly simultaneously.

본 논문에는 압축력을 받는 국부좌굴, 뒤틀림좌굴 및 두 좌굴의 혼합좌굴이 발생하는 종방향 보강재가 부착된 강판의 거동 및 극한 강도에 대한 실험적인 연구를 서술하였다. 압축력을 받는 보강판의 경우 서브패널의 폭-두께비와 보강재의 휨강성에 따라서 국부좌굴, 뒤틀림좌굴 또는 두 좌굴의 혼합형태의 좌굴이 발생하게 되고, 상당한 크기의 후좌굴강도가 발현되어 보강판의 극한강도를 지배하게 된다. 보강재의 휨강성과 보강재로 구분된 서브패널의 폭-두께비가 다른 두께 4.0mm, 공칭항복강도 235MP인 SM400 강판으로 제작된 보강판의 중심압축실험을 수행하고 유한요소해석결과와 비교하여 검증하였다. 실험 결과에 근거하여 보강판의 극한강도를 예측할 수 있는 직접강도법을 적용한 설계압축강도식을 제안하였다. 제안된 직접강도법은 뒤틀림좌굴 또는 국부좌굴과 뒤틀림좌굴이 혼합하여 발생하는 종방향 보강재로 보강된 강판의 극한강도를 적절하게 예측할 수 있는 것으로 판단되었다.

Keywords

References

  1. 건설교통부(2005) 도로교설계기준. 한국도로교통협회.
  2. 권영봉(2000) Buckling Analysis Program(BAP) 사용자메뉴얼, 영남대학교
  3. AASHT (2007) LRFD Bridge Design Specifications, 4th ed., American Association of State Highway and Trandportational Officials, Washington, DC.
  4. Choi, B.H., Hwang, M.O., and Park, C.H. (2005) Experimental Study on Inelastic Buckling Behavior of Stiffened Plates in Compression. Proc. 3rd International Symposium on Steel Structures, Seoul. Korea. pp. 89-96.
  5. ECS (2003) Eurocode3 Design of steel structures. Part 1-2: General rules for building. European Committee for Standardization, Brussel, Belgium.
  6. ECS (2006) Eurocode3 Design of steel structures. Part 1-5: Plated structured elements, European Committee for Standardization, Brussel, Belgium.
  7. FEA (2009) LUSAS Element Reference Manual & User's Manual (version 14.3-1).
  8. Kwon, Y.B. and Hancock, G.J. (1992) Strength Design Curves for Thin-Walled Sections Undergoing local and Distortional Buckling. Journal of Structural Engineering, ASCE. Vol. 118, No. 7, pp.1786-1803. https://doi.org/10.1061/(ASCE)0733-9445(1992)118:7(1786)
  9. Kwon, Y.B., Kim, B.S., and Hancock, G.J. (2009) Compression Tests of High Strength Cold-Formed Steel Channels with Buckling Interaction. Journal of Constructional Steel Research, Vol. 65. pp.278-289. https://doi.org/10.1016/j.jcsr.2008.07.005
  10. Lau, S.C.W. and Hancock, G.J. (1986) Buckling of Thin Flat-Walled Structures by a Spline Finite Strip Method. Thin-Walled Structures, Vol. 4, No. 4, pp. 269-294. https://doi.org/10.1016/0263-8231(86)90034-0
  11. LRFD Bridge Design Specifications, 4th ed., AASHT (2007) Washington DC, USA.
  12. Thang, D.D., Koo, M.S., Hameed, A., and Jeong, Y.D. (2009) Stiffness Requirement for Flat-Bar Longitudinal Stiffener of Box-Girder Compression Flanges. International Journal of Steel Structures, Vol. 9. No.2. pp.115-122. https://doi.org/10.1007/BF03249486
  13. Yang, D. and Hancock, G.J. (2004) Compression Tests of High Strength Steel Channel Columns with Interaction between Local and Distortional Buckling. Journal of Structural Engineering, ASCE. Vol. 130, No. 12, pp. 1954-1963 https://doi.org/10.1061/(ASCE)0733-9445(2004)130:12(1954)
  14. Yoo, C.H. (2001) Design of Longitudinal Stiffeners on Box Girder Flanges. International Journal of Steel Structures, Vol. 1, No. 1, pp. 15-23.
  15. Yoo, C.H., Choi, B.H. and Ford, E.M. (2001a) Stiffness Requirement for Longitudinally Stiffened Box-girder Flanges. Journal of structural engineering, ASCE. Vol. 127, No. 6, pp.705-711. https://doi.org/10.1061/(ASCE)0733-9445(2001)127:6(705)
  16. Yoo, C.H., Choi, B.H. and Ford, E.M. (2001b) Stiffness Requirement for Longitudinally Stiffened Box-girder Flanges. Journal of structural engineering, ASCE. Vol. 127, No. 6, pp.954-1963.