• Journal of the Mineralogical Society of Korea
• /
• v.23 no.1
• /
• pp.85-91
• /
• 2010

The various forms of heavy metals in soil environments have been studied by sequential extraction method. We tested conventional Tessier sequential extraction and new ultrasound-sonication extraction methods, and compared their extraction efficiency. Total As, Cd, Cu, Pb, and Zn contents of the target soil (NIST SRM 2710 Montana Soil), by three methods (USEPA Method 3050B, KBSI Method, and ultrasound-sonication method) were all consistent with the certified values. Sequential extraction efficiency along with step-wise extraction values was similar in both Tessier method and ultrasound-sonication method. The ultrasound-sonication method took about 3 hours to complete whole procedure while the Tessier sequential extraction method took around 12 hours. Ultrasound-sonication method was estimated as one of the best methods with a relatively short application time and no requirement of high temperature treatment.

• Journal of Food Hygiene and Safety
• /
• v.5 no.4
• /
• pp.237-242
• /
• 1990

This study was conducted to evaluate the usage of TBA method for the analysis of lipid peroxidation induced by streptozotocin. 5 mM streptozotocin and 1 % TBA alone showed the maximum peak at 309 nm and 358 nm respectively, although no peak was observed at 532 nm which was the wavelength to determine the absorbance for TBA method. When 5 mM streptozotocin was mixed together with 1 % TBA in vitro, new peaks at 439 nm and 532 nm had been detected, suggesting TBA did interact directly with streptozotocin forming new colored products. These results suggest that TBA method is not adequate for determination of lipid lperoxidation induced by streptozotocin.

• Journal of the Korean Society of Hazard Mitigation
• /
• v.9 no.1
• /
• pp.27-32
• /
• 2009

The main objective of this study is to develop a test for measuring the bond shear strength between pavement layers. The research is also conducted to evaluate tack coat materials and application rate in porous pavement. The experiment includes using two types of emulsions (RSC-4, Modified Emulsion) and a asphalt binder type (HM-1). HM-1 was developed to be applied in porous pavement. The bond shear strengths were measured by a direct shear type device under various test conditions. The shear strength may not be appropriate in the evaluation of the bond shear strength, while the toughness of the test may be useful. In case of the tack coat application rate in porous pavement, RSC-4 has to be used a minimum amount of $0.8l/m^2$ and modified emulsion asphalt has to be applied a volume of use $0.5{\sim}0.6l/m^2$. HM-1, asphalt cement type, is far stronger bond shear strength than emulsified asphalt tack coat and had showed the excellent trackless property.

• Korean Journal of Food Science and Technology
• /
• v.29 no.2
• /
• pp.326-336
• /
• 1997

Four ice nucleation-active bacteria (INA-bacteria), Pseudomonas syringae, Xanthomonas campestris, Escherichia coli JM109/pEIN229 and Gluconobacter oxydans/pKIN230, were treated with heat, pressure and gamma-irradiation to compare viability and their ice nucleation activity (INA) after sterilization. Gamma-irradiated INA-bacteria showed the least decrease in T90 value (the temperature at which the 90% of drops are frozen). According to cumulative INA spectra, gamma-irradiated INA-bacteria showed little decrease in class A ice nuclei $(nucleate\;H_{2}O\;at\;higher\;than\;-5^{\circ}C)$, pressurized INA-bacteria showed more than 90% decrease in class A ice nuclei, and heat-treated INA-bacteria barely showed class A ice nuclei. Differential scanning calorimetry (DSC) was used to examine the effect of INA-bacteria on the thermophysical properties of water at freezing temperature. Freezing peaks were appeared at about $11{\sim}15^{\circ}C$ higher on thermograms and enthalpies of phase change were decreased for the water containing INA-bacteria compared with the pure water, while melting peaks were not shifted. INA measured by DSC method were significantly correlated with INA measured by drop freezing method $(R^{2}>0.993,\;p<0.0001)$, indicating that DSC can be used as a new, simple and precise method for measuring INA.

• Proceedings of the Korean Society of Propulsion Engineers Conference
• /
• 1996.11a
• /
• pp.137-144
• /
• 1996

The kinetic coefficients far decomposition of the cured phenol resin (SC-1008) using a modified Arrhenius relationship have been determined from thermogavimetric analyses (TGA). The kinetic parameters were determined by multiple heating rate technique developed by Freideman and Henderson. Weight loss (decomposition) and weight loss rate (decomposition rate)were measured and recorded for three heating rates; $5^{\circ}C$/min ,$10^{\circ}C$/min, and $20^{\circ}C$/min. Relatively good agreement was obtained between measured and calculated decomposition as a function of temperature. By separating the reaction, the reaction order and pre exponential factor become empirical parameters which provide a "best fit" of the data. However, this method yields an extremely accurate reproduction of the thermograms over a wide range of heating rates. This is the desired result for kinetic parameters used in thermal models.al models.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.31 no.6D
• /
• pp.803-810
• /
• 2011

The public interest of global warming and energy shortage is gradually increased, and the related industries also have become interested in developing eco-friendly material and technology. Warm-mix asphalt (WMA) is a result of the developments to alleviate global warming and energy problems. This WMA is produced at lower temperatures than the temperature at which hot mix asphalt (HMA) is produced. Because most tests in Superpave are developed only for the performance and maintenance of HMA produced by hot temperatures, it is difficult for the tests to identify properly the material properties and then evaluate the performances between HMA and WMA. This study deals with the development of a new protocol to differentiate HMA and WMA performance, and especially the interfacial properties between asphalt and aggregate are targeted as the performance indicator; thus, an evaluation method and guideline are suggested. The concept and idea of the test method applied in this study were modified from the DSR moisture damage test protocol. In addition, TSR test was performed to affirm the relation between the asphalt-aggregate interface and the asphalt-aggregate mixture performances. The followings are the results of this study. Shear stress at 85% linear visco-elastic complex modulus (LVE $G^*$) can be a better parameter than LVE $G^*$, which can assess the interfacial or bonding performance between asphalt and aggregate. Moreover, measuring the bonding performance in thinner film thicknesses will be a better way to evaluate the real and field situation between asphalt and aggregate. The interfacial properties' criteria to apply the newly developed test and parameter should be developed, after the asphalt mixture criteria relating to the interfacial properties are completed.

• Korean Journal of Food Science and Technology
• /
• v.24 no.4
• /
• pp.393-395
• /
• 1992

The ${\alpha}-lactalbumin({\alpha}-la)$ concentration in raw and laboratory-heated milks by HPLC was 1.20 mg/ml (unheated), 1.17 mg/ml ($63^{\circ}C$, 30min), 1.13 mg/ml ($72^{\circ}C$, 15sec) and 0 mg/ml ($100^{\circ}C$, 10min), respectively. Whereas, ${\alpha}-lactalbumin$ concentration ranges of commercial milks were $1.00{\sim}1.02\;mg/ml$ (pasteurized), $0.23{\sim}0.68\;mg/ml$ (UHT-pasteurized) and $0.77{\sim}0.89\;mg/ml$ (UHT-sterilized), respectively. It was supposed that the ${\alpha}-lactalbumin$ content of sterilized milk will be lower than that of UHT milk, but the opposite occurred. This discrepancy would be caused by the different heating system in the milk plants, where indirect UHT-treatment had more heat intensity than direct UHT-processing. The HPLC determination of ${\alpha}-lactalbumin$ may be an indicator to evaluate correctly and rapidly heated milks.

• Journal of Korean Society of Forest Science
• /
• v.14 no.1
• /
• pp.21-31
• /
• 1972

It has intended to identify the members of the Genus Lespedeza in Korea by a chemical colour reaction, and the following five species of the Genus Lespedeza grown in the garden have been used in this experiment. 1. Lespedeza bicolor Turcz 2. Lespedeza bicolor var. melanantha (Nak.) T. Lee 3. Lespedeza cyrtobotrya Miq. 4. Lespedeza japonica var. intermedia Nakai 5. Lespedeza maritima Nakai 6. Lespedeza maximowiczii Schneider 7. Lespedeza maximowiczii var. tomentella Nakai A few drops of each solution of $K_2Cr_2O_7$. $FeSO_4{\cdot}7H_2O$, $FeCl_3$, $KH_2PO_4$, $KMnO_4$, $NH_4OH$, and HCl was added to the methanol extracts of wood dust to get the specific colour reaction. HCl-infused wood was also used for the identification of L. bicolor var. melanantha and L. bicolor. The results can be summarized as the following key; 1. Chrome lemon by $K_2Cr_2O_7$ ${\cdots}{\cdots}$2 1. Sun flower yellow by $K_2Cr_2O_7$ ${\cdots}{\cdots}$Lespedeza maximowiczii var. tomentella Nakai 2. $KH_2PO_4$ Oystem white by $KH_2PO_4$; golden yellow by $FeCl_3$ ${\cdots}{\cdots}$=3 2. Cream colour by $KH_2PO_4$=6 3. Oyster white by $NH_4OH$; corn colour by $FeSO_4{\cdot}7H_2O$ ${\cdots}{\cdots}$4 3. Cream colcur by $NH_4OH$ ${\cdots}{\cdots}$5 4. Van dyke brown by $KMnO_4$ ${\cdots}{\cdots}$; sea shell pink by HCl injection under heating ${\cdots}{\cdots}$Lespedeza japonica var. intermedia Nakai 4. Sepia colour by $KMnO_4$; honey colour by HCl injection under heating ${\cdots}{\cdots}$Lespedeza maritima Nakai 5. Golden red by $FeSO_4{\cdot}7H_2O$; andover green by HCl-infused wood dust ${\cdots}{\cdots}$Lespedeza bicolor var. melanantha (Nak.) T. Lee 5. Yellow ochre by $FeSO_4{\cdot}7H_2O$; sand warm gray by HCl-infused wood dust ${\cdots}{\cdots}$Lespedeza bicolor Turcz 6. Amber green by $FeCl_3$ ${\cdots}{\cdots}$Lespedeza cyrtobotrya Miq. 6. Leather brown by $FeCl_3$ ${\cdots}{\cdots}$Lespedeza maximowiczii Schneider.

• Analytical Science and Technology
• /
• v.12 no.1
• /
• pp.34-39
• /
• 1999

Estrone such as estriol and estradiol can not be determined by votammetric methods, because these are electrochemically inactive in the potential windows for mercury drop electrode. Nitro-derivatives of estrone are electro active and nitration of estrone is accomplished by heating the solution involving estrone and sodium nitrite in a water-bath at $100^{\circ}C$ for 30 min. Such nitro-derivatives are determined directly by voltammetry. The electrochemical behavior for nitrated estrone was investigated by cyclic voltammetry. The trace estrone was determinated by differential pulse adsorptive cathodic stripping voltammetry. Nitrated estrone gives a well defined voltammetric wave at ca. - 0.61 V (vs. Ag/AgCl electrode). The electrochemical reaction was irreversible process in sodium borate buffer at pH 11 and nitrated estrone was strongly adsorbed on the surface of mercury electrode. The optimal experimental conditions for the determination of nitrated esterone were found to be 0.05 M sodium nitrate, 0.01 M sodium borate, pH 11.0, and an accumlation potential of 0.10 V (vs. Ag/AgCl). The detection limit was as low as $1{\times}10^{-9}M$ for estrone with 2 min accumulation time.

• Journal of the Korean Ceramic Society
• /
• v.36 no.4
• /
• pp.343-353
• /
• 1999

Microwave(2.45 GHz) was used as energy source in hydrothermal reaction to fabricate ultrafine BaTiO3 powder. Using microwave of 700 W, crytal BaTiO3 began to fom after 5 min in microwave-autoclave sys-tem. The crystallinity was not noticeably increased with increasing longer reaction time than 10 min. On the other hand in microwave-reflux system crytal BaTiO3 began to form after 15min and the crystallinity was not noticeably increased with increasing longer reaction time than 1hr,. In either case particle size dis-tribution was considerably uniform due to the effect of homogeneous heating by microwave. In addition mi-crowave heating gave an extremely small degree of particle agglomeration compared to electric heating. Av-erage sizes of as-synthesized powders were 30-60nm. Ba/Ti ratio in sol played an important role in det-ermining the particle size. It seems that excess barium forms different phases such as Ba(OH)2 which makes thin layer on the surface of BaTiO3 powder. This thin layer would inhibit the agglomeration of Ba-TiO3 powders and keep the small grain size. In microwave-autoclave system tetragonal-BaTiO3 was formed directly by the reaction of only 15 min. In the case of microwave-reflux system tetragonal-BaTiO3 was formed by driyng over 25$0^{\circ}C$.