• Journal of Ginseng Research
• /
• v.33 no.1
• /
• pp.8-12
• /
• 2009

A simple gradient HPLC method for rapid determination of major ginsenosides ($Rg_1$ and $Rb_1$) and unique ginsenoside (Rf) of Korean ginseng (Panax ginseng C.A. Meyer) was developed. Within 50min, three ginsenosides have been separated and identified on $\mu$-Bondapak $C_{18}$ column ($3.9{\times}300\;mm$, $10{\mu}m$) with gradient elution using water and acetonitrile as a mobile phase. The method was validated in terms of linearity, accuracy, and precision. The correlation coefficients ($r^2$) for calibration curves of ginsenosides were over 0.9997. The developed HPLC method was successfully applied to the analysis of ginseng samples and the recoveries of ginsenosides were in the range of $101.1{\sim}115%$ with RSD<3.2%. The developed method could be used for rapid evaluation of the ginsenosides $Rg_1$, $Rb_1$, and Rf.

• Journal of the HCI Society of Korea
• /
• v.1 no.1
• /
• pp.37-44
• /
• 2006

Specular reflections provide the visual feedback that describes the material type of an object, its local shape, and lighting environment. In photorealistic rendering, there have been a number of research available to render specular reflections effectively based on a local reflection model. In traditional cel animations and cartoons, specular reflections plays important role in representing artistic intentions for an object and its related environment reflections, so the shapes of highlights are quite stylistic. In this paper, we present a method to render and control stylized specular reflections using projective textures based on principal curvature analysis. Specifying a texture as a pattern of a highlight and projecting the texture on the specular region of a given 3D model, we can obtain a stylized representation of specular reflections. For a given polygonal model, a view point, and a light source, we first find the maximum specular intensity point, and then locate the texture projector along the line parallel to the normal vector and passing through the point. The orientation of the projector is determined by the principal directions at the point. Finally, the size of the projection frustum is determined by the principal curvatures corresponding to the principal directions. The proposed method can control the position, orientation, and size of the specular reflection efficiently by translating the projector along the principal directions, rotating the projector about the normal vector, and scaling the principal curvatures, respectively. The method is be applicable to real-time applications such as cartoon style 3D games. We implement the method by Microsoft DirectX 9.0c SDK and programmable vertex/pixel shaders on Nvidia GeForce FX 7800 graphics subsystems. According to our experimental results, we can render and control the stylized specular reflections for a 3D model of several ten thousands of triangles in real-time.

• Analytical Science and Technology
• /
• v.25 no.4
• /
• pp.250-256
• /
• 2012

Two marker compounds of Achyranthis Radix, ecdysterone and inokosterone, were analyzed by HPLC on an ODS column ($250{\times}4.6$ mm, 5 ${\mu}m$) with a mobile phase of 15% acetonitrile containing 0.08% formic acid at a flow rate of 1.0 mL/min and a detection wavelength of UV 254 nm. The method was validated by ICH guideline and applied to the monitoring of marker compounds in 93 samples of Achyranthis Radix collected at various areas in Korea and China. The new content criteria of ecdysterone and inokosterone, established using linear regression method were 0.033% and 0.020%, respectively. When the new content criteria were applied to the quality control test of commercial Achyranthis Radix, 95.4% of total samples including 100% of Korean and 92.6% of Chinese samples were passed the test. Application of new content criteria could protect the Korean products and decrease the distribution of Chinese products with lower quality.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.29 no.3
• /
• pp.209-217
• /
• 1984

This study was conducted to establish fundamental of rice cultivation system in the southern warm region of Korea by investigation of variation of yield component factor and yield under the different transplanting dates which was at interval of 15 days, from May 20 to July 5. In the variation of leaf age, the leaf of July 5 transplanting was less 1.1 leaves than that of May 20 transplanting in Seokwang. However in Dongjin, the leaf of May 20 transplanting was more 1.7 leaves than that of July 5. According to transplanting date delay, the shorten ratio of flag leaf was showed an increasing tendency. Period from transplanting to heading under the different transplanting in Seokwang, required about 75 days in May 20 transplanting and 68 days in June 5, 67 days in June 20, but 71 days in July 5, it was a cause of decrease in grain yield, because of increase in the period from transplanting to heading date. The maximum yield under the different transplanting gathered on May 20 transplanting in Seokwang variety, and on June 20 transplanting in Dongjin variety, and then, on the accumulated temperature 1017$\pm$24$^{\circ}C$ in Seokwang, 952$\pm$15$^{\circ}C$ in Dongjin, from 10 days before heading to 30 days after heading, it was appeared the high yield. It was showed linearly negative correlation between the No. of panicles per unit area and transplanting date (Seokwang; r=-0.6768$^{**}$, Dongjin: r=-0.5182$^{**}$). There were more differentiation of spikelets per panicle in the late transplanting in Seokwang, however in Dongjin, it was decreased in differentiation of spikelets per panicle in the early and the late transplanting.ing.

• Analytical Science and Technology
• /
• v.23 no.2
• /
• pp.155-160
• /
• 2010

This study was performed to compare international analytical methods of bromate and applied to determine bromate in bottled mineral water in Korea. Bromate in bottled mineral water was eluted by 10~50 mM potassium hydroxide (KOH) and determined by ion chromatograph-suppressed conductivity detector (ICCD). Sample was purified with on guard Ba-, Ag- and H-cartridges and $0.2\;{\mu}m$ membrane filter. The method detection limit (MDL) and the limit of quantitation (LOQ) of bromate were 0.1 and $0.5\;{\mu}g/L$, respectively. The calibration curve showed good lineality above 0.9998 in the ranges of the $0.5\sim40\;{\mu}g/L$. Bromate from 33 samples among total 157 bottled mineral water samples was detected in the concentration range of $0.5\sim6.5\;{\mu}g/L$. The detected concentrations were within bottled mineral water quality criteria ($10\;{\mu}g/L$) in Korea.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.40 no.4
• /
• pp.723-730
• /
• 2015

In this paper, a location tracking compensation algorithm based on the Least-Squares Method ($LCA_{LSM}$) was proposed to improve the autonomous tracking efficiency for the docent robot in exhibition hall, and the performance of the $LCA_{LSM}$ is analyzed by several practical experiments. The proposed $LCA_{LSM}$ compensates the collected location coordinates for the robot using the Least-Squares Method (LSM) in order to reduce the cumulated errors that occur in the Encoder/Giro sensor (E/G) and to enhance the measured tracking accuracy rates in the autonomous tracking of the robot in exhibition hall. By experiments, it was confirmed that the average error reduction rates of the $LCA_{LSM}$ are higher as 4.85% than that of the $LCA_{KF}$ in Scenario 1 (S1) and Scenario 2 (S2), respectively on the location tracking. In addition, it was also confirmed that the standard deviation in the measured errors of the $LCA_{LSM}$ are much more low and constant compared to that of the E/G sensor and the $LCA_{KF}$ in S1 and S2 respectively. Finally, we see that the suggested $LCA_{LSM}$ can execute more the stabilized location tracking than the E/G sensors and the $LCA_{KF}$ on the straight lines of S1 and S2 for the docent robot.

• Annual Conference on Human and Language Technology
• /
• 1992.10a
• /
• pp.367-375
• /
• 1992

한국어는 다른 언어와는 달리 초성, 중성, 종성의 자소가 모여서 한 음절을 이룬다. 음절을 이루는 자소는 그 발생의 확률적 성질에 따라 확률변수로 간주된다. 음절 안에서 자소간의 발생의 상관관계는 자소간 조건부 확률 및 엔트로피로 표시된다. 음절이 모여서 단어를 이루고 단어를 이루는 음절은 그 발생의 확률적 성질에 따라 확률변수로 간주된다. 한국어 단어안에서 음절간의 발생의 상관관계는 음절간 조건부 확률 및 엔트로피로 표시된다. 수 있다. 그런데 가능한 음절의 종류가 매우 많기 때문에 음절 발생의 상관관계를 표시하는 지표로서 음절간 조건부 확률 대신 초성, 중성, 종성 단위의 조건부 확률을 사용하는 것이 음절간의 발생의 상관관계를 표시하는데 효과적이다. 이러한 한국어의 정보이론적 연구를 위하여서는 기초자료로서 한국어 단어의 빈도분포가 필요하다. 한국어 단어의 빈도분포의 포괄적인 조사는 1956년의 "우리말 말수 사용의 잦기 조사"가 유일한 실정이다. 시간 경과에 따른 한국어의 정보이론적 특성 변화의 분석을 위하여서는 한국어 단어 빈도의 주기적인 조사가 필요하다. 한국어에서 초성, 중성, 종성단위의 정보이론적 연구결과는 한국어 음성인식 및 함성, 자연언어처리, 암호법, 언어학, 음성학, 한국어부호 표준화 연구등에 이용될 것으로 기대된다. 남북한의 언어는 분단이 지속됨에 따라 상호 이질화가 진행되고 있다. 이러한 이질화를 극복하려는 부분적인 노력으로 남북한 언어의 한국어 영문표기의 단일화 등이 있었다. 이러한 노력에 병행하여 남한과 북한의 언어에 대한 정보이론적 비교 연구도 있어야 할 것이다. 정보를 효과적으로 캐싱할 수 있도록 인접한 데이터를 클러스터링해서 브로드캐스팅하여 이동 호스트의 구성 시간(setup time)을 최소화하였다. 그리고, 맨하탄거리(Manhattan Distance)를 사용해서 위치 의존 질의에서 사용하는 데이타를 캐싱하고 질의를 처리하는 방법을 제안한다. 맨하탄 거리를 이용해서 캐싱하면 도로에 인접해서 위치한 데이타를 효과적으로 캐싱할 수 있다. 또한, 거리 계산 방법으로 맨하탄 거리를 사용하면 도심에서 실제 이동 거리와 비슷한 값을 알 수 있고, 직선 거리 계산식에 비해서 계산식도 간단하기 때문에 시스템 계산량도 줄일 수 있다. 기준으로 라이신 부산물은 어분 단백질을 40%까지 대체가 가능하였으며, 아울러 높은 라이신 부산물의 대체 수준에 있어서 사료효율과 단백질 전환효율을 고려한다면 아미노산 첨가(라이신과 아르지닌)와 중화 효과에 좋은 결과가 있을 것으로 사료된다.의한 적정 양성수용밀도는 각고 5~6cm 크기의 경우 10~15개체가 적합하였다. 수증별 성장은 15~20 m 수층에서 빨랐으며, 성장촉진과 폐사를 줄이기 위해서는 고수온이 지속되는 7~10월에는 20~30m수층으로 채롱을 내려 양성하고 그 외 시기에는 15 m층 내외가 좋은 것으로 나타났다. 상품으로 출하 가능한 크기 인 각고 10 cm이상, 전중량 140 g 내외로 성장시 키기까지는 채묘후 22개월이 소요되었고, 출하시기는 전중량 증가가 최대에 이르는 3월에서 4월 중순이 경제적일 것으로 판단된다.er 90 % of good relative dynamic modulus of elasticity due

• Journal of the Korean Wood Science and Technology
• /
• v.41 no.4
• /
• pp.318-326
• /
• 2013

The effect of finger joint location and distance from joint to joint one another on 3 point mid-concentration bending strength properties was investigated in this experiment. Resorcinol-phenol formaldehyde (RPF) and aqueous vinyl urethane (AVU) was used to domestic Pinus densiflora Sieb. et Zucc and imported Picea sitchensis Carr. that have been cut to different width of 0.15 mm between finger tip and root width and the distance from loading point to finger joint was 0, 30, 40, 50, 60 mm. The effect was not found on the location and distance of finger joint for bending modulus of elasticity, while the efficiency of bending strength property increased proportionally as the location of finger joint from the load point and the distance between finger joint increased. No influence was shown by finger joint location and distance beyond 3 times of specimen thickness, since similar values were shown between the solid wood and no destruction occurred materials.

• Journal of Korean Ophthalmic Optics Society
• /
• v.17 no.4
• /
• pp.411-417
• /
• 2012

Purpose: To investigate changes of contrast sensitivity with decreasing luminance in photopic conditions. Methods: Contrast sensitivities for 63 university students were investigated at 5 different luminance levels using FACT chart. Results: All contrast sensitivities measured were in the normal range. The peak of contrast sensitivity function was observed to move from 6 to 3 cpd between 40 and $10cd/m^2$. From an intersection point of two hypothetical lines related with contrast sensitivity for 6 and 3 cpd, we could evaluated that the peak moved from 6 to 3 cpd at about $25cd/m^2$. When luminance decreases from 120 to $10cd/m^2$, contrast sensitivity loss at 6 cpd was most, while contrast sensitivity at 1.5 cpd changed little. We could evaluate that at luminance of more than $25cd/m^2$ evaluated approximately, contrast sensitivity was high in the following order of spatial frequency: 18< 12<1.5<3<6 cpd, while at luminance of less than about $25cd/m^2$ as follows: 18<12<1.5<6<3 cpd. Contrast sensitivity losses with decreasing luminance were also evaluated using the decrements and decrement rates of contrast sensitivity. The decrement of contrast sensitivity was the greatest at 6 cpd, while the decrement rate was the greatest at 8 cpd. Conclusions: We propose that evaluation methods used in this research may be available as another methods to evaluate the changes of contrast sensitivity.

• Journal of the Korean Chemical Society
• /
• v.41 no.2
• /
• pp.98-104
• /
• 1997

A simple, accurate and reproducible capillary electrophoresis(CE) assay has been developed for the determination of berberine, cinnamic acid, and glycyrrhizin which are used in traditional Korean medicinal preparations. Separation of these compounds was performed in 20 mM phosphate buffer(pH 7.5) and acetonitrile(75:25, v/v) using a bare fused silica capillary($57 cm{\times}75 {\mu}m$ i.d.) at 25$^{\circ}C$. With the electric field of 350 V/cm, the time needed for the separation of berberine, cinnamic acid and glycyrrhizin was within 13 min. Calibration curves were linear for 1∼100 ${\mu}g/mL$ berberine, 0.3∼100 ${\mu}g/mL$ cinnamic acid and 2.5∼100 ${\mu}g/mL$ glycyrrhizin. The ranges of relative standard deviations(n=5) for those samples were between 0.96∼2.35%. The limits of detection(S/N=3) for berberine, cinnamic acid and glycyrrhizin were 0.5, 0.1 and 2.0 ${\mu}g/mL$, respectively. The numbers of theoretical plates were 181,000(berberine), 88,000(cinnamic acid) and 169,000(glycyrrhizin), while they were 3,100∼4,800 in HPLC.