• Journal of Advanced Navigation Technology
• /
• v.27 no.6
• /
• pp.815-820
• /
• 2023

In this paper, the design method of a miniaturized chipless RFID tag using a modified bent H-shaped slot was proposed. The proposed modified bent H-shaped slot was appended on the rectangular conductor plate printed on one side of a 20 mm × 50 mm FR4 substrate with a thickness of 0.8 mm. The resonant dip frequency of the bistatic RCS for the proposed modified bent H-shaped slot was compared with the cases when the H-shaped, U-shaped slot, and bent H-shaped slots were added, respectively, on the conductor plate. The simulated resonant dip frequencies for H-shaped, U-shaped, and bent H-shaped slots were 5.907 GHz, 4.918 GHz, and 4.364 GHz, respectively. When the proposed modified bent H-shaped slot was added, the resonant dip frequency was decreased to 3.741 GHz, and, therefore, the slot length was reduced by 36.7% compared to the H-shaped slot case. Experiment results show that the resonant dip frequency of the fabricated modified bent H-shaped slot was 3.9 GHz.

• Journal of the Korean Society of Fisheries and Ocean Technology
• /
• v.40 no.3
• /
• pp.206-213
• /
• 2004

As far as an opening device of fishing gears is concerned, applications of a kite are under development around the world. The typical examples are found in the opening device of the stow net on anchor and the buoyancy material of the trawl. While the stow net on anchor has proved its capability for the past 20 years, the trawl has not been wildly used since it has been first introduced for the commercial use only without sufficient studies and thus has revealed many drawbacks. Therefore, the fundamental hydrodynamics of the kite itself need to ne studied further. Models of plate and canvas kite were deployed in the circulating water tank for the mechanical test. For this situation lift and drag tests were performed considering a change in the shape of objects, which resulted in a different aspect ratio of rectangle and trapezoid. The results obtained from the above approaches are summarized as follows, where aspect ratio, attack angle, lift coefficient and maximum lift coefficient are denoted as A, B, $C_L$ and $C_{Lmax}$ respectively : 1. Given the triangular plate, $C_{Lmax}$ was produced as 1.26${\sim}$1.32 with A${\leq}$1 and 38$^{\circ}$B${\leq}$42$^{\circ}$. And when A${\geq}$1.5 and 20$^{\circ}$${\leq}$B${\leq}$50$^{\circ}$, $C_L$ was around 0.85. Given the inverted triangular plate, $C_{Lmax}$ was 1.46${\sim}$1.56 with A${\leq}$1 and 36$^{\circ}$B${\leq}$38$^{\circ}$. And When A${\geq}$1.5 and 22$^{\circ}$B${\leq}$26$^{\circ}$, $C_{Lmax}$ was 1.05${\sim}$1.21. Given the triangular kite, $C_{Lmax}$ was produced as 1.67${\sim}$1.77 with A${\leq}$1 and 46$^{\circ}$B${\leq}$48$^{\circ}$. And when A${\geq}$1.5 and 20$^{\circ}$B${\leq}$50$^{\circ}$, $C_L$ was around 1.10. Given the inverted triangular kite, $C_{Lmax}$ was 1.44${\sim}$1.68 with A${\leq}$1 and 28$^{\circ}$B${\leq}$32$^{\circ}$. And when A${\geq}$1.5 and 18$^{\circ}$B${\leq}$24$^{\circ}$, $C_{Lmax}$ was 1.03${\sim}$1.18. 2. For a model with A=1/2, an increase in B caused an increase in $C_L$ until $C_L$ has reached the maximum. Then there was a tendency of a very gradual decrease or no change in the value of $C_L$. For a model with A=2/3, the tendency of $C_L$ was similar to the case of a model with A=1/2. For a model with A=1, an increase in B caused an increase in $C_L$ until $C_L$ has reached the maximum. And the tendency of $C_L$ didn't change dramatically. For a model with A=1.5, the tendency of $C_L$ as a function of B was changed very small as 0.75${\sim}$1.22 with 20$^{\circ}$B${\leq}$50$^{\circ}$. For a model with A=2, the tendency of $C_L$ as a function of B was almost the same in the triangular model. There was no considerable change in the models with 20$^{\circ}$B${\leq}$50$^{\circ}$. 3. The inverted model's $C_L$ as a function of increase of B reached the maximum rapidly, then decreased gradually compared to the non-inverted models. Others were decreased dramatically. 4. The action point of dynamic pressure in accordance with the attack angle was close to the rear area of the model with small attack angle, and with large attack angle, the action point was close to the front part of the model. 5. There was camber vertex in the position in which the fluid pressure was generated, and the triangular canvas had large value of camber vertex when the aspect ratio was high, while the inverted triangular canvas was versa. 6. All canvas kite had larger camber ratio when the aspect ratio was high, and the triangular canvas had larger one when the attack angle was high, while the inverted triangluar canvas was versa.

• Proceedings of the Korean Institute of Surface Engineering Conference
• /
• 2003.05a
• /
• pp.55-55
• /
• 2003

최근 높은 해상도의 평판 디스플레이 장치 특히 차세대 TFT-LCD를 개발하기 위해서는 건식식각공정의 개발이 필수 불가결하며 이는 플라즈마 공정장치의 대면적화가 가능해야 한다. 따라서 산업계는 이러한 제조 조건에 알맞는 대면적 플라즈마 반응기 개발을 추구하고 있다. 이를 위해서는 건식식각공정의 개발이 필수 불가결하며 이를 위해선 플라즈마 공정장 치의 대면적화가 가능해야 한다. 이러한 대면적 공정을 위해서는 낮은 공정압력, 고밀도, 높은 플라즈마 균일도가 요구된다. 또한 이러한 대면적 고밀도 플라즈마에의 적용을 위하여 새로운 유도결합형 플라즈마 소오스의 개발이 진행되고 있으며, 안정적인 300mm웨이퍼 공정을 위하여 여러 형태의 안테나가 연구되어지고 있다. 그러나 차세대 TFT-LCD에 적용 가 능하게끔 기존의 ICP 소오스를 직접적으로 대면적화 하는데 있어서는 안테나의 인덕턴스의 값이 키지며, 유전물질의 두께 증가 및 그에 따른 재료비의 상슴에 의해 그 한계점을 나타 내었다. 본 연구에서는 차세대 TFT-LCD 및 POP 대면적 공정에 적용 가능한 고밀도 플라즈마를 발생시키기 위해서 내장형 유도결합형 선형 안테나를 사용하였다. 내장형 유도결합형 선형 안테나가 가지고 있는 고유의 정전기적 결합효과를 최소화시키기 위해 직사각형모양의 플라즈마 챔버(830mm*1,020mm)에서 영구자석을 사용하였다. 영구자석을 사용하여 외부자 장을 인가하였을 때가, 그럴지 않은 때보다 RF 안테나에 걸리는 코일의 전압을 낮춰주었으며, 영구자석의 배열에 따라 코일의 인덕턴스의 값이 크게 변함을 알 수 있었다. 그리고, 최적화된 자장의 배열은 플라즈마의 이온밀도를 증가시켰으며, 플라즈마 균일도 또한 10% 이 내로 유지됨을 알 수 있었다. 따른 식각 메커니즘에 대하여 알아보고자 하였다. $CF_4/Cl_2$ gas chemistry 에 첨 가 가스로 $N_2$와 Ar을 첨 가할 경 우 텅 스텐 박막과 하부 layer 간의 etch selectivity 증가는 관찰되지 않았으며, 반면에 첨가 가스로 $O_2$를 사용할 경우, $O_2$의 첨가량이 증가함에 따라 etch s selectivity 는 계속적으로 증가렴을 관찰할 수 있었다. 이는 $O_2$ 첨가에 따라 형성되는 WOF4 에 의한 텅스텐의 etch rates 의 감소에 비하여, $Si0_2$ 등의 형성에 의한 poly-Si etch rates 이 더욱 크게 감소하였기 때문으로 사료된다. W 과 poly-Si 의 식각 특성을 이해하기 위하여 X -ray photoelectron spectroscopy (XPS)를 사용하였으며, 식각 전후의 etch depth 를 측정하기 위하여 stylus p pmfilometeT 를 이용하였다.X> 피막이 열처리 전후에 보아는 기계적 특성의 변화 양상은 열역학적으로 안정한 Wurzite-AlN의 석출에 따른 것으로 AlN 석출상의 크기에 의존하며, 또한 이러한 영향은 $(Ti_{1-x}AI_{x})N$ 피막에 존재하는 AI의 함량이 높고, 초기에 증착된 막의 업자 크기가 작을 수록 클 것으로 여겨진다. 그리고 환경의 의미의 차이에 따라 경관의 미학적 평가가 달라진 것으로 나타났다.corner$적 의도에 의한 경관구성의 일면을 확인할수 있지만 엄밀히 생각하여 보면 이러한 예의 경우도 최락의 총체적인 외형은 마찬가지로