• Proceedings of the Korean Society For Composite Materials Conference
• /
• 2005.11a
• /
• pp.53-56
• /
• 2005

In this study, the material characterization and the dynamic behavior of 3D orthogonal woven composite materials has been studied under transverse central low-velocity impact condition by means of the micromechanical model using finite elements. To build up the micromechanical model considering tow spacing and waviness, an accurate unit structure is stacked in x-y-z direction repeatedly. First, the mechanical properties of 3D orthogonal woven composites arc obtained by means of virtual experiment using full scale Finite Element Analysis based on the DNS concepts, and the computed elastic properties arc validated by comparison to available experimental results. Second, using the implementation of this validated micromechanical model, 3D transient finite-clement analysis is performed considering contact and impact, and the impact behavior of 3D orthogonal woven composite is investigated. A comparison study with the homogenized model will be carried out in terms of global and local behaviors.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.22 no.7
• /
• pp.816-825
• /
• 1998

This study surveys the thermal property and air permeability to the weight reduction rate of PET fabrics. For this purpose, 12 kinds of satin and 18 kinds of plain weave fabrics are prepared with change of the physical properties such as weft yarn count, t.p.m. and density. The weight reduction rate was 0%, 12%, 25% and 30%. The warm/cool feeling(Qmax), thermal insulating value(T.I.V.) and thermal conductivity(K) were measured by KES-F7 System and discussed in relation with the weight reduction rate, weft yarn linear density, t.p.m., weft density of fabric and weave structure.

• Proceedings of the Korean Reliability Society Conference
• /
• 2006.05a
• /
• pp.381-383
• /
• 2006

최근, 선진국에서는 $Rukaflex^{(R)}$라는 새로운 구조의 웨빙을 개발하여, normal usage marks를 감소시키고, 웨빙의 품질을 향상시키려는 경향을 보인다. 기존의 웨빙은 멀티 필라멘트가 경/위사 방향으로 교차되는 구조를 갖는 소폭직물인데, 새로운 구조의 $Rukaflex^{(R)}$는 위사방향에 멀티 필라멘트와 모노 필라멘트를 동시에 사용하여 탄성률(resilience)을 높여서 구조 안정성을 항상시킨 형태의 웨빙이다. 본 연구에서는 $Rukaflex^{(R)}$ 웨빙의 수명을 구조개선 및 마모특성 향상을 통하여 50% 이상 향상시켰는데, 기존 웨빙과 초기 인장강도에서는 차이가 나지 않았으나 활성화 에너지, 형상모수, $B_{10}$ 수명이 증가한 것을 확인할 수 있었다. 이는, 척도모수에서는 기존 웨빙과 근소한 차이를 보이나 구조개선에 의한 마모특성 향상에 의하여, 균일한 마모 및 degradation 특성을 나타내므로, $B_{10}$ 수명이 향상된 것을 확인할 수 있었다.

• Science of Emotion and Sensibility
• /
• v.20 no.2
• /
• pp.117-126
• /
• 2017

In this study, moisture transport characteristics for the woven and knitted fabrics made of 8 kinds of fiber materials using MMT (moisture management tester) were measured and discussed with the Bireck bt MMT and water evaporating rate (WER) measuring methods, which are vertical moisture transport methods. In addition, the drying property by MMT of the eight kinds of specimens was compared and discussed with the results measured by the vertical drying measurement. MMT experimental result which is horizental moisture transport appeared to be similar to the result of the Bireck method, which is the vertical moisture transport experiment. Absortion time measured from drip method of the fabrics made of the bamboo, linen, and cotton/nylon composite fabrics was short and thus they showed best wicking property, which was attributed to the low contact angle on the fabric surface and high porosity of the fabrics due to the staple yarn structure composed of the hydrophilic staple fibers. In drying property of the fabric specimens by MMT, maximum absorption radius of the dry-zone knit and bamboo woven fabrics were the highest and they showed the best drying property, which was a little different result compared with vertical drying measurement method. Half time of the drying rate in the MMT method was highly correlated with the fabric thickness and saturated moisture absortion rate and their regression coefficients were 0.9 and 0.88, respectively. This means that the knitted and woven fabric design technology for retaining good wicking and drying properties of the fabrics with thin fabric thickness is very important for obtaining high functional wear comfort fabrics. In addition, wicking and drying properties of the fabrics made of different fiber materials and with different yarns and fabric structures showed different results according to the measuring methods.

• Science of Emotion and Sensibility
• /
• v.20 no.3
• /
• pp.141-150
• /
• 2017

The purpose of this study was to analyze the effect of the shape and attached position of E-textile-based stretchable sensors on motion-sensing performance and to investigate the requirements for the optimal structure of clothes for sensing limb motions. An experimental garment was prepared with different sensor shapes, and attachment positions. A child subject, wearing the experimental garment, performed arm and leg bending and extension motions at $60^{\circ}$, $90^{\circ}$ and $120^{\circ}$ motion angles, at a rate of 60 deg/sec. The changes in voltage triggered by the stretching and contracting of the fabric-sensor were measured, and an acceleration sensor was utilized to verify that the experimental motions were correctly performed. Dummy arms and legs of a child were manufactured to perform an identical test, in order to compare the dummy results with the actual human body experiment results. The analysis showed that the reproducibility and reliability of the rectangular sensor, showing uniform and stable were higher than those of the boat-shaped sensor, in both the dummy and the human body experiments. The attachment position of the sensor was more reproducible and reliable when placed on 4 cm below the elbow and knee joints in the dummy test, when placed in the joints of the elbow and knee, in children experiment. The appropriate shapes and attached positions of the sensor for sensing the motions were analyzed, and the results proved that motion-sensing of the human body is possible by utilizing flexible fabric-sensors integrated into clothes.

• Composites Research
• /
• v.18 no.4
• /
• pp.27-34
• /
• 2005

Salt water spray and immersion tests were experimentally conducted for over 6 months to investigate the durability of glass fabric/phenolic composites under salt water environment. Mechanical properties such as tensile properties, flexural properties, and shear properties were evaluated and thermal analysis properties such as storage shear modulus, loss shear moduls, and tan 6 were obtained through a DMA. A change in chemical structures was analyzed through a FTIR. According to the results, mechanical properties and thermal analysis properties were sensitive to salt water environment and these properties began to degrade in increasing in exposure times. However, tensile and flexural moduli started to decrease and then slightly increase as increasing in exposure times due to plasticization and crosslinking in matrix as well as physical swelling in composites. Beyond a certain exposure times, these properties began to decrease as further increasing in exposure times. Also the shape and location of peaks in FTIR curves were insensitive to exposure times, but the intensity of peaks would be. finally we found that the durability of glass fabric/phenolic composites were affected on salt water immersion environment rather than salt water spray environment.

• Textile Coloration and Finishing
• /
• v.9 no.4
• /
• pp.62-80
• /
• 1997

60년대와 70년대는 전세계가 물자부족의 시대였기 때문에 저가제품도 수출이 되고 따라서 국제 경쟁력이 있었던 시대였다. 그러나 현재는 세계 전체의 물자가 남아돌기 때문에 특히 인건비가 크게 상승한 우리 나라와 같은 섬유수출국에서는 부가가치가 높은 제품이 개발되어 제품화가 되지 않으면 현재 우리가 겪고 있는 $\ulcorner$고비용 저효율$\lrcorner$의 산업구조를 가지게 된다. 본고에서는 최근 폴리에스테르 직물산업에 관계되는 $\ulcorner$구조조정$\lrcorner$과 관련하여, 향후 국내 폴리에스테르 섬유산업의 구조조정의 방향과 우리의 정책방향을 제직과 염색. 가공분야에 대해 제시해 보고자 한다.

• Proceedings of the Korean Society of Dyers and Finishers Conference
• /
• 2011.03a
• /
• pp.97-97
• /
• 2011

현대사회에서 화재에 의한 물적 피해는 물론 인적피해가 현저하게 증가하고 있으며 희생자의 사망원인이 종래에는 화재시 발생한 열에 의한 화상을 중심으로 하는 소사였지만, 최근에는 화염보다 독성가스로 인하여 사망하는 경우가 많아졌고, 희생자는 거의 화상을 확인할 수 없거나 화상자이더라도 혈액 중에서 일산화탄소를 중심으로 한 유독가스가 확인되기 때문에 이들 유독가스의 흡입으로 인하여 행동불능상태 이후 열의 영향으로 사망한 것으로 추정되는 사례가 증가하는 추세이다. 따라서 대규모 건축물에 있어서는 화재발생시 유독가스가 건물 전체로 연소 확대되는 것을 방지하기 위하여 넓은 면적을 일정한 면적으로 구획하거나 계단실 등과 다른 부분 또는 층별 등으로 구획하고 있으며, 국내의 방화구획은 크게 다른 층으로 화재전파를 막기 위한 층간 방화구획, 연소면적을 제한하기 위한 면적별 방화구획, 다른 용도로 인한 화재 위험성 감소를 위해 용도별 방화구획으로 3가지를 법에서 채택하고 있다. 방화구획은 방화문 또는 자동방화셔터를 이용하거나, 내부구조의 바닥, 벽, 각종 방화문으로 구획할 것을 정하고 있다.(피난방화규칙 제14조) 본 연구에서는 철제방화셔터 대체용으로 직물방화셔터용의 실리카 소재를 이용하여 제직한 직물에 내열/차연 기능성 코팅의 공정 조건을 변화하여 최종 방화시험을 거치기 전 내열성 테스트중 하나인 불꽃열 통과량 실험을 실행하여 방화 직물의 내열성을 비교 분석하였다. 이러한 결과를 토대로 본 연구는 고내열/차연성 방화 제품 기술을 개발하는데 필요한 연구를 수행하는데 목적이 있다.

• Korean Journal of Heritage: History & Science
• /
• v.40
• /
• pp.243-270
• /
• 2007

Linked pearls pattern expressed on textiles have no limited scale or shape when manufacturing, so they are free in expression. And from the design, material, and color we can analogize the social culture of that age. Oriental linked pearls pattern was started from the Sasanian Persia and introduced through the Silk Road, so it is closely connected with the East and the West culture. This study will consider from the 5th century to the 10th century; the mural costume of the West Central Asia, the ancient textiles excavated from the Sinjiang and Qinghai area of China, and the linked pearls pattern which are collected at Shosoin, Japan. And from this study, will concentrate on clarifying the linked pearls pattern's condition of the cultural exchange between the East and the West and it's structural variation process. The design of linked pearls pattern delivered to the East through the Silk Road is differed by area. For example, in the Western Pamir Plateau, where the ancient Sogdians mainly lived, the excavated linked pearls pattern's subject were deer or cassowary variated from the West Asian motif. But the ones excavated from Kucha Xingang had Chinese motifs added so they showed Chinese characters or Buddhist Bodhisattva image instead of Helios. Like this, the appearance of new patterns, which were accompanied by structural variations, gradually deviated from the standardized pattern of the Sasanian Persia. And this structural variation process has relations with the construction and arrangement method of various patterns of the after ages. The foliated floral Spray, which is placed at the lozenge space of linked pearls' space, had developed into ogival - shaped pattern (Neunghwamun). And the prevalence of geometrical structure pattern after the 10th century and the unfolding method of Tapjamun which is arranging unit pattern in order, are similar to the linked pearl pattern. In brief, linked pearls pattern accompanied by technical improvement let us understand the polished artistic code from its expression, and has importance in showing universal pattern beyond region and culture.

• Proceedings of the Korean Fiber Society Conference
• /
• 2002.04a
• /
• pp.239-242
• /
• 2002

코드사 재봉기는 커튼, 침장류와 같은 제품에 입체구조의 무의를 발현시키기 위하여 30,000 ~50,000d 굵기의 실을 사용하여 직물표면에 입체 무의를 만드는 특수 재봉기이다. 이 재봉기는 작업자가 방향 전환 핸들을 이용하여 무의를 직접 만들어야 하는 수동방식이기 때문에 숙련공의 의존도가 높다. 그래서 숙련공의 의존도를 낮추고 제품의 질, 균일성, 생산성을 향상시키기 위하여 자동화가 절실히 요구되어 왔다[1]. (중략)