• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.30 no.1
• /
• pp.76-83
• /
• 1985

A hypothesis that artificial reforming of corn canopy could improve solar light penetration and dry matter production was tested in corn fields (var. Suwon 19) with three planting densities; low (60 ${\times}$ 40cm), medium (60 ${\times}$ 24cm) and high (60 ${\times}$ 16cm). Natural canopy was found that leaf orientations were even over all azimuth but somewhat inclined toward north-south direction and leaf angle ranged 38$^{\circ}$ to 71$^{\circ}$ from horizontal surface. Reforming corn canopy included following treatments: 1) natural canopy planted in north-south rows (natural canopy), 2)east-west plane canopy planted in north-south rows (E-W canopy), 3)east-west plane canopy and upright leaves in north-south rows, 4)north-south plane canopy (N-S canopy) in east-west rows. After corn plots were installed with training system by supporting poles and connecting wires, corn leaves were induced to a reforming direction and tied on wire. Average light intensity at the mid-point of plant height showed 5-10% increases in E-W canopy and in E-W canopy plus upright leaves, but a 2-10% decrease in N-S canopy from natural canopy. At yellow ripe stage, total dry wt. was increased in E-W canopy but not in N-S canopy. The E-W canopy produced 3-10% more grain yield than natural canopy. Though E-W canopy plus upright leaves yielded less at low density, it yielded up to 10% more at higher density. The N-S canopy yielded similar to low compared with natural canopy. These results suggests that reforming canopy toward solar incident direction increases light penetration into lower canopy, photosynthetic efficiency and grain yield, especially at high planting density in corn.

• Korean Journal of Breeding Science
• /
• v.50 no.4
• /
• pp.485-489
• /
• 2018

A mungbean cultivar "Munpyeong" (Vigna radiata (L.) Wilczek) was derived as a cross between "Keumseong" and "IT163157" at the Jeollanamdo Agricultural Research and Extension Services (JARES) in 2013. "Munpyeong" has an erect growth habit, heart leaflet, green hypocotyls, black and straight pods when matured, and a dull green seed surface. The stem length of "Munpyeong" was 60 cm, which was 6 cm shorter than that of the control cultivar "Owool." The pod number per plant was 25, which was 3 more than that of the control cultivar. The 1000 seed weight of "Munpyeong" was 45 g, which was 4 g lighter than that of the control cultivar "Owool." Its field resistance to mungbean mottle virus, cercospora leaf spot, and powdery mildew are similar to the control cultivar, whereas its field resistance to lodging was slightly stronger. The hard seed rate of "Munpyeong" was 3.2%, which was similar to that of the control cultivar. The sprout yield ratio was 7.54 times, which was 9% more than that of the control cultivar. The average yield of "Munpyeong" was 1.93 ton/㏊, which was 21% more than that of the control cultivar "Owool" (Cultivar registration number: 5878).

• Korean Journal of Environmental Agriculture
• /
• v.2 no.1
• /
• pp.45-54
• /
• 1983

This experiment was carried out to investigate effects of dense planting on the growth and productivity in varieties of hot pepper at open field. Three varieties (Joseng jinheung, Weonkyo No. 304 and Bulam house Putgochu) were sowed on Jan. 30th and transplanted on May 12th. The planting densities used were 3,300, 5,500 and 8,300 plants per 10a. The results obtained are as follows: 1) With higher plant density, the plant shape was changed from open-type to upright-type and the yield was increased, presumably due to the increase of leaf area index. 2) LAI and SLA per unit area were increased by denser planting. Wonkyo No. 304 presented the highest LAI and the lowest SLA. 3) Dry matter weight per unit area was also increased, however the LW/SW ratio was tended to decrease on denser planting. 4) Through crop growth analysis, it was determined that CGR and NAR were increased during the early growth stages and became decreased from last June. 5) Light intensity under the canopy formed by denser planting was decreased by 40% measured at 60 ㎝ above the soil surface. The vertical distribution of fruits became concentrated the upper part of plant. Fruit yield per unit area in denser planting was increased as compared to the conventional planting. The number of fruit setting decreased. 6) Generally, no differences in yield were detected in comparison between denser planting and conventional planting harvested on Aug. 30th and Oct. 15th, respectively. But Weonkyo No. 304 increased yield by 18% in denser planting.

• Journal of Korean Society of Coastal and Ocean Engineers
• /
• v.18 no.2
• /
• pp.137-146
• /
• 2006

This is the second of a two-part paper which describes comparison of reliability design methods by application to Donghae Harbor Breakwaters. In this paper, Part 2, we deal with sliding of caissons. The failure modes of a vertical breakwater, which consists of a caisson mounted on a rubble mound, include the sliding and overturning of the caisson and the failure of the rubble mound or subsoil, among which most frequently occurs the sliding of the caisson. The traditional deterministic design method for sliding failure of a caisson uses the concept of a safety factor that the resistance should be greater than the load by a certain factor (e.g. 1.2). However, the safety of a structure cannot be quantitatively evaluated by the concept of a safety factor. On the other hand, the reliability design method, for which active research is being performed recently, enables one to quantitatively evaluate the safety of a structure by calculating the probability of failure of the structure. The reliability design method is classified into three categories depending on the level of probabilistic concepts being employed, i.e., Level 1, 2, and 3. In this study, we apply the reliability design methods to the sliding of the caisson of the breakwaters of Donghae Harbor, which was constructed by traditional deterministic design methods to be damaged in 1987. Analyses are made for the breakwaters before the damage and after reinforcement. The probability of failure before the damage is much higher than the allowable value, indicating that the breakwater was under-designed. The probability of failure after reinforcement, however, is close to the allowable value, indicating that the breakwater is no longer in danger. On the other hand, the results of the different reliability design methods are in fairly good agreement, confirming that there is not much difference among different methods.

• Korean Journal of Soil Science and Fertilizer
• /
• v.9 no.1
• /
• pp.33-38
• /
• 1976

As a basic studies for increasing food production utilizing sandy barren lands and sandy farmlands of low productivity which distributed widely in Korea, an experiment of growing rice-plant on sandy barren land was undertaken as follows. 1. Variety, IR-667 was adopted and the growing method was a nutrient-irrigation culture which aimed to minimize percolation loss in sand with an automatic contineous supplying nutrient solution for supplmenting the sand characteristics. 2. The growth type price-plant after heading was a typical higher yield plant, that is, numerous, small, narrow, and thickend leaves, straight attitute, dense fasciculated etc. though the rooting of plant after planting was delayed because of using paddy-field grown seedling. 3. The adaptability of rice-plants on sandy land seemed to be different by varieties and IR-667 was more adaptable than ordinary Japonica varieties. 4. Even at the period of heading and maturing, the root system of rice-plant grown on sand showed vigorous growth having more activated apical portions. while, even the lower leaves showed flourished state. 5. The suppling of calcium and magnecium in addition to nitrogen, phosphorus and potassium on sand made notable increase of stem number per plant, grain number per stem and yields.