• 대한설비공학회:학술대회논문집
• /
• 대한설비공학회 2003년도 하계학술대회 논문집
• /
• pp.137-137
• /
• 2003

• 대한설비공학회:학술대회논문집
• /
• 대한설비공학회 2003년도 하계학술대회 논문집
• /
• pp.136-136
• /
• 2003

• Journal of Advanced Marine Engineering and Technology
• /
• 제22권6호
• /
• pp.792-799
• /
• 1998

Further improvement of existing $H_{2}O/LiBr$ absorption refrigeration machine is absolutely neces-sary to promote the utilization of gas-cooling system Among various methods to improve the per-formance of the absorption refrigeration machine this research has focused on the use of a new working fluid that has better properties than the existing $H_{2}O/LiBr$ working fluid. In the series of the research, $H_{2}O/LiBr+HO{(CH_{2})}_{3}OH$ system was selected as the most promisable candidate. The absorption refrigeration machine is water-cooled double-effect, $H_{2}O/LiBr+HO{(CH_{2})}_{3}OH$ sys-tem with series flow type. In this study we found out the characteristic of new working solution through the cycle simulation and compared the result with that of LiBr solution to evaluate. Theoptimum designs and operating conditions were determined based on the operating constraints and the coefficient of performance. Results demonstrate that new working fluid subsrantially increases COP by as much as 10% and has a wider working range with 8% higher crystallization limits compared to the conventional $H_{2}O/LiBr$.

• 설비공학논문집
• /
• 제8권2호
• /
• pp.288-298
• /
• 1996

The gas-fired absorption refrigeration system to utilize treated sewage is available for environmental protection and energy conservation. Simulation analysis on the double-effect absorption refrigeration cycles with parallel or series flow type has been performed. The working fluid is Lithium Bromide and water solution. The main purpose of this study is evaluating the possibilities of effective utilization of treated sewage as a cooling water for the absorber and condenser. The efficiency of a couple of cycles has been studied and simulation results show that higher coefficient of performance could be obtained for parallel flow type. The other purpose of the present study is to determine the optimum designs and operating conditions based on the operating constraints and the coefficent of performance in the paralledl flow type.

• 대한설비공학회:학술대회논문집
• /
• 대한설비공학회 2007년도 동계학술발표대회 논문집
• /
• pp.534-539
• /
• 2007

The objectives of the present work is to investigate the influence of the solution cooled absorber(SCA), refrigerant drain heat exchanger(RSX), exhaust gas/solution heat exchanger(ESX) and high efficiency solution heat exchanger on COP for a double-effect series-flow absorption chiller. A simulation program has been prepared for the cycle analysis of absorption chillers. As a result, Solution heat exchangers(LSX, HSX) are a most effective element for the COP than the others. In spite of the poor contribution to COP, SCA make a rule to reduce the crystallization phenomena of LiBr solution at solution heat exchanger. And the optimum solution split ratio are varied with the relative size of RSX and LSX.

• 설비공학논문집
• /
• 제20권10호
• /
• pp.662-668
• /
• 2008

The objectives of the present work are to investigate the influence of the solution cooled absorber(SCA), refrigerant drain heat exchanger(RSX), exhaust gas/solution heat exchanger(ESX) and high efficiency solution heat exchanger on COP for a double-effect series-flow absorption chiller. A simulation program has been prepared for the cycle analysis of absorption chillers. As a result, solution heat exchangers(LSX, HSX) are the most effective element for the COP than the others. In spite of the poor contribution to COP, SCA plays an important role to reduce the crystallization phenomena of LiBr solution at solution heat exchanger. And the optimum solution split ratio varies with the relative size of RSX and LSX.

• 한국정보과학회논문지:데이타베이스
• /
• 제32권6호
• /
• pp.603-615
• /
• 2005

워크플로우 관리 시스템은 다양성과 복잡성이 커지고 있는 비즈니스 프로세스 관리의 해결대안으로서 부각되고있다. 본 연구에서는 주어진 프로세스 흐름을 세 가지의 패턴 즉, 반복블록, 직렬블록 및 병렬블록 등으로 단순화하고 노드의 위상적 순서(topological ordering)를 생성하는 알고리즘을 이용하여 사이클을 찾아 반복블록을 제거하고, 다음으로 직렬 및 병렬블록을 반복적으로 검색하는 수로분기 알고리즘을 포함하는 새로운 모델을 제시한다. 그리고 ACTA 형식론에 기반하여 각 블록을 ECA규칙으로 변환하여 사건(event)을 감지하는 워크플로우 시스템으로의 구현 방안을 제시한다. 그 모델의 결과를 컴퓨터가 수행할 수 있도록 만들어주는 과정 즉, 비즈니스 프로세스를 모델에 입각하여 통제하는 데에 사건-조건-처리(ECA)규칙을 사용한다. 유형별로 ECA 규칙에 입각한 통제 논리를 설계하였으며, 이것은 규칙기반 워크플로우 관리시스템의 기초가 될 수 있다. 또한 본 연구의 결과가 현행 DBMS들의 능동형 규칙(active rule)에 적용될 수 있도록 구체적 대안을 제시하였다.