• The Journal of Korea Institute of Information, Electronics, and Communication Technology
• /
• v.5 no.4
• /
• pp.191-197
• /
• 2012

In this paper, method using electric braking from stop area to high-speed area was presented in order to improve air-brake. And electric braking method can be improved environmental problems, efficiency, economy, etc.. Method for electrical complete braking are two ways that method of inserting series resistance between the motor and the inverter, and method of inverter output voltage increase. In this paper, use series resistance insert method because economical and easy to apply. In addition, Series resistor is used short circuit method for reduce the power loss. In improved efficiency and the laboratory environment for secure braking, resistance insert method and inverter output voltage increase method showed same characteristics in all areas.

• The Journal of Korea Institute of Information, Electronics, and Communication Technology
• /
• v.5 no.3
• /
• pp.127-137
• /
• 2012

In this paper, method using electric braking from stop area to high-speed area was presented in order to improve air-brake. And electric braking method can be improved environmental problems, efficiency, economy, etc. Method for electrical complete braking are two ways that method of inserting series resistance between the motor and the inverter, and method of inverter output voltage increase. In this paper, use series resistance insert method because economical and easy to apply. In addition, Series resistor is used short circuit method for reduce the power loss. In improved efficiency and the laboratory environment for secure braking, resistance insert method and inverter output voltage increase method showed same characteristics in all areas.

• Proceedings of the Korean Institute of Communication Sciences Conference
• /
• 1990.06a
• /
• pp.306-311
• /
• 1990

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.10 no.2
• /
• pp.328-332
• /
• 2006

Efficient finite field operation in the elliptic curve (EC) public key cryptography algorithm, which attracts much of latest issues in the applications in information security, is very important. Traditional serial finite multipliers root from Mastrovito's serial multiplication architecture. In this paper, we adopt the polynomial basis and propose a new finite field multiplier, inducing numerical expressions which can be applied to exhibit 3 times as much performance as the Mastrovito's. We described the proposed multiplier with HDL to verify and evaluate as a proper hardware IP. HDL-implemented serial GF (Galois field) multiplier showed 3 times as fast speed as the traditional serial multiplier's adding only partial-sum block in the hardware. So far, there have been grossly 3 types of studies on GF($2^m$) multiplier architecture, such as serial multiplication, array multiplication, and hybrid multiplication. In this paper, we propose a novel approach on developing serial multiplier architecture based on Mastrovito's, by modifying the numerical formula of the polynomial-basis serial multiplication. The proposed multiplier architecture was described and implemented in HDL so that the novel architecture was simulated and verified in the level of hardware as well as software.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.15 no.6
• /
• pp.251-255
• /
• 2015

In this paper, we propose a fuse controller which is used for storing the optimal value or the correction value for the surrounding product of the IoT applications and it is implemented serial communication circuit using a single pin. Because of the proposed single pin protocol is simpler in the hardware than the conventional $I^2C$ and SPI using two or more pins, it is suitable for the area of small amount of data transmission. The function of the one pin protocol is verified by logic simulation and the FPGA test board and it is fabricated using CMOS 0.35um technology. It is expected to use the IoT product that require the low power consumption and simple hardware.

• Proceedings of the KIPE Conference
• /
• 2015.07a
• /
• pp.61-62
• /
• 2015

본 논문에서는 단상 UPS 모듈을 직렬로 연결 시 모듈간의 위상을 동기화하는 제어 알고리즘을 제안한다. 단상 직렬 모듈 UPS 시스템을 구성할 때, 각 모듈의 위상이 동기화 되어 있지 않는다면 직렬 연결된 출력단을 통해 부하에 불안정한 전력을 공급하게 된다. 따라서 직렬 구성으로 각 모듈의 출력전압 위상을 동기화하여 안정적인 출력전압 제어가 필요하다. 기존에는 CAN통신을 이용했지만 본 논문에서는, Master, Slave 모듈의 PLL 기법을 이용한 순차적인 제어를 통해 위상을 동기화시킬 수 있는 제어 알고리즘을 제안한다. 제안하는 제어 알고리즘은 시뮬레이션을 통해 타당성을 검증하였다.

• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.17 no.3
• /
• pp.11-17
• /
• 2003

In this paper, we implemented 2-wire (data gnd) RS232C serial communication interface by applying the Collision Sensing Multiple Access(CSMA) Protocol. The transmitting and receiving wires of RS232C pert are connected together by the interface circuit forming data wire without hardware modification On two-wired common channel connection simultaneous transmission Don mere than two hosts causes data collision. The collision is detected by loop-back test of transmission data comparing with the fed back data to detect the data distortion. Various models are adopted to reduce the probability of retransmitted data collision and experiments show the performance of each cases. Due to allowing multiple hosts to be accessed through the common communication channel with minimum circuit addition the result of this paper can be easily applied for conventional RS232C instruments and machines to connect to the single data communication line.

• Proceedings of the Korea Information Processing Society Conference
• /
• 2017.11a
• /
• pp.128-130
• /
• 2017

본 논문에서는 IoST(Internet of Small Things)로 분류되는 소형화된 사물에 적합하도록 기존 2핀을 사용하여 통신하는 I2C 직렬 통신과 달리 단일 핀을 사용하여 온도 습도 통신이 가능한 통신 기술을 연구하였다. 기존의 센서 정보를 주고받는 I2C 직렬 통신 방식은 클럭과 데이터 핀을 사용하여 비교적 빠른 속도로 데이터 전송을 하지만 단일 핀 사용 방식보다 전력소모에 큰 영향을 주기 때문에 IoST 통신에서 보다 적합하도록 하드웨어 설계를 단순화하여 면적을 줄이고 전력 소모를 줄이도록 하는 방안을 연구하였다.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2000.10a
• /
• pp.149-152
• /
• 2000

본 논문에서는 전자계의 시간 변화 파형을 측정하기 위한 모노폴 안테나의 감도 특성을 개선하기 위해 리액턴스 소자를 안테나에 직렬 또는 병렬 연결한 경우의 감도 특성에 관하여 검토하고 있다. 이론 해석의 결과, 리액턴스 소자를 병렬로 연결할 경우에는 장하 리액턴스의 갑이 무한대일 때 감도 특성이 가장 양호하였으며, 직렬로 연결한 경우에는 최대의 감도 특성을 갖는 리액턴스의 값이 존재한다는 것을 알 수 있었다.

• Electronics and Telecommunications Trends
• /
• v.20 no.3 s.93
• /
• pp.112-121
• /
• 2005

고속직렬프로토콜의 출현으로 기존의 병렬 인터페이스에서 중요하게 사용되던 파라미터들의 의미가 변화되고 있다. 특히 ‘1’, ‘0’의 디지털 신호가 고속의 차동신호로 전송되면서 신호 무결성의 파라미터로 지터(jitter)가 중요한 의미를 가지게 되었다. 본 고는 지터의 발생과 분석, 테스트 등 전분야를 다루고 있다. 지터를 분석하기 위한 방법으로 Eye Diagram, Bathtub 곡선, TIE 히스토그램 등을 다루며 이러한 방법을 사용하여 지터를 각각의 특성별로 분리한다. 그리고 지터를 테스트 장비와 각각의 특징을 살펴본 후 PCI Express 트랜시버 지터 테스트의 실례를 통하여 지터 테스트 방법과 분석을 보여준다.