• Journal of Convergence for Information Technology
• /
• v.11 no.2
• /
• pp.117-123
• /
• 2021

The effects of electrolyte concentration on the electrochemical properties of Fe4[Fe(CN6)]3(FeHCF) as a novel active material for the electrode of aqueous zinc-ion batteries was investigated. The electrochemical reactions and structural stability of the FeHCF electrode were significantly affected by the electrolyte concentration. In the electrolyte solutions of 1.0-7.0 mol dm-3, the charge-discharge capacities increased with increasing electrolyte concentration, however gradually decreased as the cycle progressed. On the other hand, in the 9.0 mol dm-3 electrolyte solution, the initial capacity was relatively small, however showed good cyclability. Additionally, the FeHCF electrode after five cycles in the former electrolyte solutions, had a change in crystal structure, whereas there was no change in the latter electrolyte solution. This suggests that the performance of the FeHCF electrode is greatly influenced by the hydration structure of zinc ions present in electrolyte solutions.

• Journal of Korean Ophthalmic Optics Society
• /
• v.12 no.4
• /
• pp.133-139
• /
• 2007

Although the physiological roles of calretinin have not been established, it may simply work as a calcium buffer or may actively work in calcium-mediated signal transduction. Calretinin plays a little role in the transport and physiological buffering of calcium in the adult photoreceptor cells, bipolar cells and horizontal cells of the human retina. We identified the calretinin-immunoreactive neurons in the inner nuclear cell layer and ganglion cell layer and the distribution pattern of the labeled neurons in the retina of a bat, Rhinolophus ferrumequinum, in this study. We observed the existence of calretinin-immunoreactive AII amacrine cell in the inner nuclear layer and ganglion cells in the ganglion cell layer of bat retina through this study. This observation must be significant along with our previous studies as we need to study for more understanding about the unsolved issue of a bat vision and the unique behavioral aspects of bat flight maneuverability.

• Proceedings of the KIEE Conference
• /
• 2011.07a
• /
• pp.1358-1359
• /
• 2011

연축전지는 충전과 방전을 반복함에 따라 그 용량이 감소하는 특성을 보인다. 연축전지의 이러한 특성은 충전/방전 과정에서 전지의 극판에서 일어나는 화학반응 중 충전/방전에 관여하지 않는 비가역적인 반응이 발생하여 극판의 활물질의 감소를 가져오기 때문이다. 본 논문에서는 이러한 비가역적인 반응을 감소시키고 비가역 반응에 의해 생성된 화합물을 분해해 극판의 활물질로 되돌릴 수 있는 shark pulse 파형을 이용한 충전 방법을 제안한다. 제안된 충전방법으로 각기 열화정도가 다른 골프카트용 12V 연축전지를 대상으로 충전실험을 하였고, 방전실험을 통해 그 용량을 측정하였다. 그 결과 실험 대상 축전지는 SoH(State of Health)가 각각 7%와 27% 만큼 개선됨을 확인하였다.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.7 no.4
• /
• pp.704-708
• /
• 2006

This study was designed to investigate the effect of Fenton reaction and consecutive rhizosphere biodegradation on diesel-contaminated soil. According to the result, the TPH removal rate was increased with the concentration of hydrogen peroxide in Fenton's treatment and showed 83.5% for soybean, 81.5% for rice, and 76% for control in rhizosphere biodegradation.

• Applied Chemistry for Engineering
• /
• v.5 no.4
• /
• pp.743-747
• /
• 1994

The catalytic effects of carboxylic acid and dibutyltin dilaurate(DBTL) on the curing rate of acrylic polyol with isocyanate prepolymer were investigated. In this work reaction of a biuret type aliphatic isocyanate with acrylic polyol follows the second order reaction in the thin film state. Carboxylic acid of acrylic polyol has a strong catalytic effect on the isocyanate groups and influences greatly on curing rate, also DBTL is more effective catalysis on acrylic polyol without carboxylic acid than with carboxylic acid.

• Proceedings of the Korean Society of Soil and Groundwater Environment Conference
• /
• 2001.04a
• /
• pp.107-110
• /
• 2001

제철소에서 매년 대량 발생되어 주로 매립처분되고 있는 제강분진의 재활용 방안으로서, 폐수처리분야에 널리 사용되고 있는 펜톤산화공정의 반응촉매원인 Fe 공급원으로서 제강분 진의 활용 가능성에 대한 연구를 수행하였다. 본 연구에서는 포항제철소에서 제철부산물로 발생되는 제강분진을 전처리 없이 산화촉매로 사용하여 김포 수도권 매립지의 침출수 처리 공정에서 펜톤산화조에 유입되는 원수를 대상으로 과산화수소에 의한 산화처리 실험을 수행하였다. 반응은 회분식으로 수행하였으며, 일반적으로 알려진 펜톤산화반응의 주요 반응조 건인 운전 pH, 과산화수소 주입량 및 분할주입, 제강분진의 주입량 등의 변화에 따른 각 조 건별 시간에 따른 반응결과를 알아보았다. 또한 기존의 Fe 공급원으로 사용되고 있는 FeSO$_4$와 처리성능 및 적용조건에 대한 비교 실험도 수행하였다. 침출수 수질변화는 TOC (Total Organic Carbon) analyzer를 사용하여 측정한 TOC값으로 나타냈으며, pH controller 와 정량펌프를 사용하여 HCl과 NaOH주입을 통해 반응기간동안 일정 pH를 유지하였다. 본 연구결과, 최적 pH 조건인 4에서 최대 75% TOC 제거율을 나타내었으며, 대부분의 반응은 30분 이내에 이루어졌다. 주어진 실험조건에서 FeSO$_4$와 비교하여 반응속도와 처리효율에서 향상된 결과를 나타내었으며 반응 후 응집침전실험에서도 보다 높은 처리효과를 얻을 수 있었다. 결론적으로, 과산화수소/제강분진 시스템을 이용한 화학적 산화처리방법은 경제성과 처리성능에서 기존의 펜톤산화공정의 대체방안으로서 향 후 적용가능성이 높을 것으로 기대된다.g, 200 mg/kg, 300 mg/kg의 순서로 함량이 점차 감소하는 결과를 얻을 수 있었다. 이상의 결과를 종합하여 볼 때 가자 메탄올추출물은 PQ 유도독성을 신장 및 폐조직에서 효과적으로 경감시키는 것으로 나타났다.ted retailers ("sellers") must accept end-of-life items returned to them by the consumers. At the local level, Taipei City implements a pay-as-you-throw program, whereby citizens pay waste collection and treatment fees through the purchase of special trash bags approved by the Taipei City Government. However. recyclables that are separated by citizens are collected free-of-charge by the City. Taichung City and Kaohsiung City, on the other hand, enforce mandatory sorting schemes, whereby citizens face penalties if they don't separate recyclables from the trash before pick-up. These programs have resulted in a significant reduction in municipal waste. Per capita waste collected per day has dropped from 1.143

• 한국신재생에너지학회:학술대회논문집
• /
• 2010.11a
• /
• pp.86.1-86.1
• /
• 2010

예비개질기(Pre-reformer)는 중대형 내부개질형 용융탄산염 연료전지(MCFC) 시스템에서 다양한 연료를 사용하기 위한 필수적인 화학반응기이다. 예비개질기는 스택 전단에 설치함으로서 스택 내부의 열균형을 유지하고, 다양한 원료를 연료로 이용할 수 있도록 하며, 황화물로부터 후단의 개질촉매 및 전극촉매를 보호하여 주개질 반응의 부담을 감소시켜 MCFC 시스템의 내구성 향상의 중요한 역할을 한다. 본 연구는 예비개질 반응기 설계에 CFD 모델링을 적용하기에 앞서 파일롯 반응기 내 농도/ 온도 구배를 측정하고자 하는 목적으로 수행되었다. 반응가스로는 천연가스 내 고차탄화수소(C2 이상) 중 상대적으로 높은 농도를 가진 에탄을 이용하였고, MCFC용 예비개질기의 운전특성을 고려하여 비교적 낮은 온도와 높은 수증기/탄소 비에서 단열반응기로 실험을 진행하였다. 향후 본 실험결과를 이용하여 CFD 모델링에 대한 검증을 수행할 예정이며, 하수처리장부생가스(ADG)/ 매립지 가스(LFG)용 MCFC 시스템을 위한 예비개질기 설계에도 적용을 하고자 한다.

• Applied Chemistry for Engineering
• /
• v.20 no.5
• /
• pp.532-535
• /
• 2009

In this study, the fatty acid methyl ester was prepared from the vegetable oil by inducing ultrasound energy. The ultrasound energy was applied to the esterification reaction for heating and stirring effects. Ultrasonic induction results in the shortened reaction time and brings the increase of the methyl ester yield. However, the continuous introduction of ultrasound during the esterification reaction results in temperature increase, then the over-heating of reaction temperature was ineffective. Therefore, the system temperature was controlled at constant temperature state with the cooling circulation. The ultrasound induction reaction had the fatty acid methyl ester yield of 93% at the reaction time was 30 minutes, faster than the traditional esterification process.

• Clean Technology
• /
• v.27 no.2
• /
• pp.198-204
• /
• 2021

This study focused on a two-step process using heterogeneous catalysts to produce biodiesel using Nepalese jatropha oil as a raw material. As a first step, the effect of the repetitive regeneration number of Amberlyst-15 on the esterification reaction of FFA in jatropha oil was investigated. Second, the possibility of a transesterification reaction scale-up using a dolomite bead catalyst was tested. Using 120 kg of jatropha seeds from Nepal, 30 L (27 kg) of jatropha oil was obtained, and the jatropha oil yield from the seeds was about 25.0 wt%. The acid value and FFA content of jatropha oil were measured to be 11.3 mgKOH g^-1 and 5.65%, respectively. As a result of the esterification reaction of jatropha oil using the Amberlyst-15 catalyst in the form of beads, the acid value of the reaction product could be lowered to 0.26 mgKOH g^-1 when the fresh Amberlyst-15 catalyst was used. As the regeneration of the Amberlyst-15 catalyst is repeated, the catalyst has been deactivated, and the esterification reaction performance has deteriorated. The cause of the deactivation seems to be due to the catalyst being broken and impurities being deposited. It was confirmed that the Amberlyst-15 catalyst could be reused up to 5 times for the esterification reaction of jatropha oil. In the second step, the transesterification reaction, a dolomite catalyst, was mass-produced and used in the form of beads. By transesterifying the pretreated jatropha oil in a spinning catalyst basket reactor equipped with 90 g of dolomite bead catalyst, 89.1 wt% of biodiesel yield was obtained in 2 hours after the start of the reaction, which was similar to the transesterification of soybean oil under the same conditions.

• Journal of the Korean Institute of Telematics and Electronics
• /
• v.27 no.10
• /
• pp.113-123
• /
• 1990

Tungsten film was deposited on the single crystal silicon wafer in a low pressure chemical vapor deposition reactor from silane and tungsten hexafluoride in the temperature range of $250-400^{\circ}C$ Deposition rate was found to be determined by the mass transfer rate of reactants from the gas phase to the safter surface. It was found out that tungsten films deposited contained about 3 atomic $\%$ of silicon and that the crystallinity and the grain size increased as the deposition temperature was increased. The resistivity of the film was measured to be in the range of $7~25{\mu}{\Omega}-cm$ and decreased with increasing deposition temperature. The adhesion of the tungsten film on a silicon surface was measured by the tape peel off test and it was improved with increasing deposition temperature. From the analysis of the gas composition, the reaction pathway to form $SiF_{4}$ and $H_{2}$ was found to be more favorable than HF formation.