• Proceedings of the Korean Society of Soil and Groundwater Environment Conference
• /
• 2003.09a
• /
• pp.583-586
• /
• 2003

부산 동래지역 지열수에 대한 지화학적 진화과정을 밝히기 위하여 지열수, 지하수 및 해수에 대한 수리화학 특성과 이들의 연관성을 고찰하였다. 또한 심부환경에서의 지화학 특성을 규명하기 위하여 각종 이온지질온도계와 다성분 지질온도계를 적용하였으며, 동위원소특성과 함께 지화학 모델링을 통하여 심부환경에서의 온천수의 지화학특성을 밝히고자 하였다. 동래 지열수의 수리화학적 특성은 해수의 영향을 받아 높은 이온함량을 보이며 Na-Cl형을 보여준다. 지열수는 주변 지하수와의 크게 혼합된 양상을 나타낸다. 지화학 모델링에 따르면 지열수는 심부에서 약 5% 영향을 받은 것으로 추정된다. 즉, 심부로 순환하는 지열수가 해수와 혼합되며, 이들이 지열에 의해 가열되면서 광물의 용해 및 침전, 이온 교환반응 등 물-암석 반응을 거치면서 심부지열수를 형성하였으며, 지열수가 천부환경으로 상승하는 과정에서 동래지역 주변 천부지하수와 다양하게 혼합되면서 현재 동래온천수의 화학조성을 갖는 온천수를 형성하는 것으로 지열수의 진화 과정을 설명할 수 있다.

• Journal of the Korean Society of Groundwater Environment
• /
• v.5 no.4
• /
• pp.192-202
• /
• 1998

We investigated the geochemistry and environmental isotopes of granite-bedrock groundwater in the Yeongcheon diversion tunnel which is located about 300 m below the land surface. The hydrochemistry of groundwaters belongs to the Ca-HCO$_3$type, and is controlled by flow systems and water-rock interaction in the flow conduits (fractures). The deuterium and oxygen-18 data are clustered along the meteoric water line, indicating that the groundwater are commonly of meteoric water origin and are not affected by secondary isotope effects such as evaporation and isotope exchange. Tritium data show that the groundwaters were mostly recharged before pre-thermonuclear period and have been mixed with younger surface water flowing down rapidly into the tunnel along fractured zones. Based on the mass balance and reaction simulation approaches, using both the hydrochemistry of groundwater and the secondary mineralogy of fracture-filling materials, we have modeled the low-temperature hydrogeochemical evolution of groundwater in the area. The results of geochemical simulation show that the concentrations of Ca$\^$2＋/, Na$\^$＋/ and HCO$_3$and pH of waters increase progressively owing to the dissolution of reactive minerals in flow paths. The concentrations of Mg$\^$2＋/ and K$\^$＋/ frist increase with the dissolution, but later decrease when montmorillonite and illitic material are precipitated respectively. The continuous adding of reactive minerals, namely the progressively larger degrees of water/rock interaction, causes the formation of secondary minerals with the following sequence: first hematite, then gibbsite, then kaolinite, then montmorillonite, then illtic material, and finally microcline. During the simulation all the gibbsite is consumed, kaolinite precipitates and then the continuous reaction converts the kaolinite to montmorillonite and illitic material. The reaction simulation results agree well with the observed, water chemistry and secondary mineralogy, indicating the successful applicability of this simulation technique to delineate the complex hydrogeochemistry of bedrock groundwaters.

• Economic and Environmental Geology
• /
• v.54 no.1
• /
• pp.69-76
• /
• 2021

This study is to identify the mineralogical properties of caprock samples from drilling cores of the Pohang basin, which is the research area for the demonstration-scale CO2 storage project in Korea. The interaction of water-rock-gas that can occur due to CO2 injection was identified using geochemical modeling. Results of mineralogical studies, together with petrographic data of caprock and data on the physicochemical parameters of pore water were used for geochemical modeling. Modelling was carried out using the The Geochemist's Workbench 14.0.1 geochemical simulator. Two steps of modeling enabled prediction of immediate changes in the caprocks impacted by the first stage of CO2 injection and the assessment of long-term effects of sequestration. Results of minerlaogical analysis showed that the caprock samples are mainly composed of quartz, K-feldspar, plagioclase and a small amount of pyrite, calcite, kaolinite and montmollonite. After the injection of carbon dioxide, the porosity of the caprock increased due to the dissolution of calcite, and dawsonite and chalcedony were precipitated as a result of the dissolution of albite and k-feldspar. In the second step after the injection was completed, the precipitation of dawsonite and chalcedony occurred as a result of dissolution of calcite and albite, and the pH was increased due to this reaction. Results of these studies are expected to be used as data to quantitatively evaluate the efficiency of mineral trapping capture in long-term storage of carbon dioxide.

• Proceedings of the Korean Association of Geographic Inforamtion Studies Conference
• /
• 2003.04a
• /
• pp.187-190
• /
• 2003

태백산 광화대는 1960년대부터 광물자원에 대한 조사 및 개발이 활발하게 이루어지고 있는 지역으로 지질관련 자료들이 많이 축적되어 있으므로 자료의 이용이 용이하고 예측 모델링을 적용한 결과와 기존 결과의 비교가 가능한 지역이다. 본 연구에서는 태백산 광화대 지역의 금속광상의 부존가능지역 예측을 위하여 지화학 자료를 이용하여 주제도를 작성하였다. 부존가능지역 예측을 위하여 사용한 기법은 GIS 기반의 예측 기법 중하나인 Weights of Evidence 모델링 기법으로 연구지역에 시범 적용함으로써 국내 환경에의 적용 가능성을 검토하고 구조선과 광상간의 공간적 상관성을 확인하였다.

• Proceedings of the Korean Radioactive Waste Society Conference
• /
• 2011.05a
• /
• pp.351-352
• /
• 2011

• Proceedings of the KSEEG Conference
• /
• 1999.04a
• /
• pp.52-52
• /
• 1999

• Journal of The Korean Association For Science Education
• /
• v.35 no.2
• /
• pp.313-323
• /
• 2015

The purpose of this study is to investigate the cognitive process of student's modeling on a modeling-emphasized argument-based general chemistry experiment. The participants were twenty-one freshman students. Six topics were carried out during the first semester and semi-structured interview was implemented at the end of the semester. Semi-structured interview questions were used to elicit elements of effective model, modeling strategies, difficulties that students have experienced during modeling, and resolving the difficulties that students have experienced during modeling. All student interview data were collected and transcribed. The results of this study are summarized as follows: (1) Elements of effective model were considered to be visual expression, persuasive explanation, and rhetorical structure. (2) Modeling strategies included arranging important keywords or writing the outline, and during the modeling process, students used various data, suggested data after reconstructing, suggested definitions and explanations of core concepts, used meta-cognition, and considering rhetorical structure. (3) Difficulties students have experienced during modeling could be categorized as lack of modeling strategy and understanding. (4) Resolving difficulties students have experienced during modeling could be categorized as modeling strategy and understanding. Students learn the strategy by feedback, modeling experience, evaluation of experimental report, models which they constructed previously and references, and the understanding of contents were achieved through arguments which occurred during classes and during the process of writing the experimental reports. These results suggest that when using modeling in teaching and learning, the argument-based learning strategy can be effective in enhancing students' modeling by helping them to understand meta-modeling with scientific concepts.

• Journal of the Korean Society of Groundwater Environment
• /
• v.6 no.4
• /
• pp.159-170
• /
• 1999

The hydrogeochemical study on the $CO_2$-rich water in the Chojeong area was carried out. The $CO_2$-rich water of Ca-$HCO_3$type is characterized by low pH (5.0~5.8). high $CO_2$concentration ($Pco_2$＜$10^{0.31}$atm) and high TDS. The water chemistry indicates that the $CO_2$-rich water was probably evolved by the local suppy of deep seated $CO_2$gas resulting in the enhanced water/rock (granite) interaction under low pH conditions. High $NO_3$concentration indicates that the $CO_2$water was mixed and diluted with low $CO_2$groundwater in the vicinity of the area, in which the extensive groundwater abstraction occurred during the past years. The evoiution of the $CO_2$-rich water in the Chojeong area for the process of $CO_2$injection water/rock interaction and mixing processes was thermodynamically simulated by PHREEQC. Although the simulation was limited to water/plagioclase interaction, the results show the feasible explanation about the observed trend of pH and Ca and Na concentrations of the $CO_2$-rich water.

• Economic and Environmental Geology
• /
• v.56 no.6
• /
• pp.847-870
• /
• 2023

The safe disposal of high-level radioactive waste requires accurate predictions of the long-term geochemical behavior of radionuclides. To achieve this, the present study was conducted to model geochemical behaviors of uranium (U), plutonium (Pu), and palladium (Pd) under different hydrogeochemical conditions that represent deep groundwater in Korea. Geochemical modeling was performed for five types of South Korean deep groundwater environment: high-TDS saline groundwater (G1), low-pH CO₂-rich groundwater (G2), high-pH alkaline groundwater (G3), sulfate-rich groundwater (G4), and dilute (fresh) groundwater (G5). Under the pH and Eh (redox potential) ranges of 3 to 12 and ±0.2 V, respectively, the solubility and speciation of U, Pu, and Pd in deep groundwater were predicted. The result reveals that U(IV) exhibits high solubility within the neutral to alkaline pH range, even in reducing environment with Eh down to -0.2 V. Such high solubility of U is primarily attributed to the formation of Ca-U-CO₃ complexes, which is important in both G2 located along fault zones and G3 occurring in granitic bedrocks. On the other hand, the solubility of Pu is found to be highly dependent on pH, with the lowest solubility in neutral to alkaline conditions. The predominant species are Pu(IV) and Pu(III) and their removal is predicted to occur by sorption. Considering the migration by colloids, however, the role of colloid formation and migration are expected to promote the Pu mobility, especially in deep groundwater of G3 and G5 which have low ionic strengths. Palladium (Pd) exhibits the low solubility due to the precipitation as sulfides in reducing conditions. In oxidizing condition, anionic complexes such as Pd(OH)₃^-, PdCl₃(OH)₂^-, PdCl₄^2-, and Pd(CO₃)₂^2- would be removed by sorption onto metal (hydro)oxides. This study will improve the understanding of the fate and transport of radionuclides in deep groundwater conditions of South Korea and therefore contributes to develop strategies for safe high-level radioactive waste disposal.

• Journal of the KSME
• /
• v.32 no.8
• /
• pp.673-684
• /
• 1992

전광 통신의 시대를 맞이하면서 광섬유의 수요가 급증하고 있어 보다 질 좋고 생산 단가가 절 감된 광섬유의 제조가 중요하며 이것은 기존 기술의 최적화와 새로운 제조기술의 개발에 의하 여만 가능할 것이다. 생산성 및 광섬유의 질이 화학증착을 비롯한 각 공정에 의지하므로 각 공 정의 최적화가 중요하며 광섬유 제조 화학증착과정에서 층착 성능은 thermophoresis로써 결정지 어지는 입자운동 및 부착에 의지하므로 향상된 증착 성능을 얻기 위하여서는 각과정에서의 열 전달, 유체유동 및 입자 부착 해석이 선행되어야 한다. 증착의 균일성, 증착효율 및 증착률의 향상을 위한 노력은 모델링을 포함한 실험적 연구 및 새로운 기술의 개발 및 시도가 필요하다고 할 수 있다.