• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.25 no.2
• /
• pp.117-131
• /
• 2007

Representation of building internal space is an active research area as the need for more geometrically accurate and visually realistic increases. 3 dimensional representation is common ground of research for disciplines such as computer graphics, architectural design and engineering and Geographic Information System (GIS). In many cases CAD plans are the starting point of reconstruction of 3D building models. The main objectives of building reconstruction in GIS applications are visualization and spatial analysis. Hence, CAD plans need to be preprocessed and edited to adapt to the data models of GIS SW and then georeferenced to enable spatial analysis. This study automated the preprocessing of CAD data using AutoCAD VBA (Visual Basic Application), and the processed data was topologically restructured for further analysis in GIS environment. Accuracy of georeferencing CAD data was also examined by comparing the results of coordinate transformation by using digital maps and GPS measurements as the sources of ground control points. The reconstructed buildings were then applied to visualization and network modeling.

• Journal of Korean Society for Geospatial Information Science
• /
• v.17 no.1
• /
• pp.53-59
• /
• 2009

The general urban plan is the plane plan which limits general and uniformed constructions; however, the district unit plan is the solid plan that can leads various constructions by discriminating by plot, housing area and lot. Therefore, for the zone plan, not only the two-dimensional plot information such as plot usage plan, but also the three-dimensional plot information needs to be used to analyze lighting, sewerage and directions. To fulfill such requirements, the information can be gathered using GIS and photogrammetric method for the reasonable and efficient zone plan. In this research, the information about the testing area for the zone plan has been gathered using GIS method, and the three-dimensional model about the area has been built using the satellite image and DEM. As the result, plot usage analysis, direction analyst, water system analysis, and slope analysis has been done and used efficiently to build the district unit plan. Also, after the result after applying the analyzed result to the actual area says this is very appropriate and efficient.

• Asia-pacific Journal of Multimedia Services Convergent with Art, Humanities, and Sociology
• /
• v.8 no.11
• /
• pp.109-119
• /
• 2018

This study investigates the effect of urban and architectural forms on the microclimate in urban areas. It applies urban and architectural elements such as urban form and tissue and building form and characteristics as the main influences on the microclimate within urban area. Among the 23 Automated Weather Stations (AWS) installed within Seoul city by the Korea Meteorological Administration, 6 sites were selected for the analysis, based on their different urban and architectural characteristics, and actual measurements were conducted in August 2017 using individual AWS equipment. Also, the measurements of microclimate and urban and architectural elements within a 500m radius of the AWS measurement points were collected and analyzed. The result of the analysis shows that the microclimate elements, such as wind speed, solar radiation, and temperature, were affected by the direction of the streets, the width, depth, and height of the buildings, the topographic elevation and direction and the traffic volume. This study is expected to contribute to mitigating urban heat island effect and setting the foundation for sustainable cities through development of urban management methods and techniques including the relationship between built environment elements and microclimate.

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.15 no.1
• /
• pp.97-105
• /
• 1997

In order to conserve architecture accurately as original feature, we need to get the data which is measured in detail about the information of size, position, type, shape, and other terms for architectures. Recently, we need to get data fast and correctly, to compose and to update the database of geographic information system, but using existing method. it is difficult to update the data effectively in the rapid development of information industry. In this study, therefore, It is measured precisely architecture using accurate close-range photogrammetry The aims of this study are real-measured plan by processing acquired image through multi-image matching method if photogrammetry, suggesting the method which is able to draw in detail front plane and plane of well-established architecture, and giving data to obtain accurate size and 3-D coordinate using analytical method.

• Journal of the Computational Structural Engineering Institute of Korea
• /
• v.21 no.3
• /
• pp.265-273
• /
• 2008

The problem controlling lateral drift by the wind and the earthquake is very important in high rise buildings. But, outrigger system, generally used for residential tall buildings in Korea, has weak points with the occupancy of special space, the difficult construction and the long duration of works. On the other hand, the damper reduces story drifts of building structure by absorbing vibration energy induced by the dynamic loads and the application of damper systems is relatively simple. Also, the lateral drift control system such as outrigger system may raise the wind vibration problem of serviceability like human comfort and this problem may need another vibration control devices. Accordingly, we analyze the effect of the drift control using various dampers to substitute for outrigger system as the efficient system in residential tall buildings.

• Journal of the Korean Society of Hazard Mitigation
• /
• v.11 no.2
• /
• pp.179-183
• /
• 2011

In this study, photochemical effects (OH radical formation) in the photoreactor was investigated to analyze UV-C intensity distribution. In addition, The influence radius of the UV-C lamp was measured at various dose of $TiO_2$ (Degussa P-25). The photoreactor used in this study was bath type reactor which is made by acrylic and the UV-C lamp (SANKYO DENKI, wavelength : 254 nm, Diameter : 2.2 cm, Length : 18.5 cm) was used as photo source. The maximum electric power consumption of the UV lamp was 10.5 W. The OH radical formation by UV-C was measured by KI dosimetry methods. From the results, the effective OH radical formation was occurred under the following condition. The reasonable distance of UV-C lamp is within 13 cm and the intensity of UV-C lamp should be more than 0.367 mW/$cm^2$. Moreover, the concentration of catalyst affects on the influence radius of the UV lamp.

• Journal of Korean Society for Geospatial Information Science
• /
• v.13 no.3 s.33
• /
• pp.41-52
• /
• 2005

The high density of population and building; can cause catastrophe in urban areas when natural or artificial disasters break out. The aim of this paper is to assess comprehensive disasters risk of urban areas by Geospatial Information System. For this purpose, we classified disasters risk of urban areas into low categories: flood, fire, building-collapse, and shelter, and then determined factors for hazard risk assessment respectively. The results of hazard assessment can be applied to minimize the demage of disasters in establishing the urban management planning. For more systematic and professional approach the further research is need to consider more disaster assessment factors and join with related experts.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2016.05a
• /
• pp.109-109
• /
• 2016

유역의 물수지는 기상인자, 지형, 토양, 식생 등 여러 가지 인자들에 의해 결정된다. 물수지 분포를 평가하기 위해 수문모형의 모의 시 필요한 수문요소 조건들을 정보화하게 되며, 동시에 토양수분의 특성, 강우 입력자료, 유역의 지형학적 특성들은 불확실성에 기인하는 요소로 작용한다. 이러한 수문모형 모의 시 불확실성을 제거하기 위해 모형 초기조건에 대한 다각적인 분석이 선행이 필요하다. 특히 토양수분은 대기와 지표 사이의 상호작용에 작용하는 중요한 수문기상학적 인자로 평가되고 있다. 토양수분 데이터 자료를 이용하여 강우-유출모형의 입력자료를 구축하여 실제 토양수분의 변동성을 파악하는 연구가 활발히 진행되고 있으며, 유역기반의 유출현황을 산정하기 위해 매우 유용한 초기조건으로 그 역할이 기대된다. 현장에서 관측하는 토양수분 데이터는 넓은 유역의 토양수분을 대표하는 자료로 사용되기에는 한계점이 있으며, 위성기반 토양수분 데이터는 원격탐사를 통해 획득되기 때문에 토양수분의 시 공간적인 변동성 파악에 용의하며 경제성 또한 높다. 이에 따라, 본 연구에서는 유역의 수문순환 분석을 하고, 위성기반 토양수분의 적용 가능성을 평가하기 위해 Aqua위성에 탑재된 Advanced Mircowave Scanning Radiometer Earth Observing System(AMSR-E)와 Metop-A의 Advanced SCATterometer(ASCAT)의 토양수분 데이터를 이용하여 강우-유출모델의 초기조건을 산정하였다. 또한, 이에 대한 검증을 위해 기존 강우인자 초기조건 및 지점에서 관측된 토양수분 초기조건 등을 비교하여 통계분석을 실시하였다.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.42 no.3
• /
• pp.359-369
• /
• 2022

In slope stability analysis for landslides, mountains have various slopes and geographical features, and hence it is necessary to estimate stability using rigorous analysis methods. In this study, after the analysis of infiltration behavior through unsaturated layers due to rainfall, the stability of landslide was estimated to account for the variation of pore water pressures. In the analysis of slope stability, a three-dimensional slope analysis was compared with an infinite slope analysis in a case study of terrain in which an actual landslide occurred. In the three-dimensional slope stability analysis, it was found that the location of the failure and the failure area were predicted accurately based on the detailed geological information despite the variation of geographical features.

• Journal of Korean Society for Geospatial Information Science
• /
• v.17 no.4
• /
• pp.45-51
• /
• 2009

Different countries around the world, using their traditional culture as a background, are promoting new changes and reformation in development and publicity method of cultural contents to promote national interests and to increase their competitiveness. Also, as the citizen's standard of living and quality of living goes up, various demands for the enjoyment of traditional culture goes up accordingly as well. As the cultural assets environment become more complicated and diverse, there is a need for systematic management and preservation plan. Keeping these viewpoints in mind, the geo-spatial information provision service using the web provides various forms of services such as satellite imagery, terrain, and 3D viewing, enabling the user to gain concrete spatial information on specific areas. The geo-spatial information using 3D modeling is done only in limited spaces because of construction expenses or difficulties in management and maintenance. In this thesis, I would like to propose Effective method for the GoogleEarth Uploading through simplification of 3D object for the publicity of traditional buildings and Cultural Resources and Tourist Attractions.