• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.15 no.1
• /
• pp.75-80
• /
• 1997

In other to construct a subway, we have to consider the position of the subway and acquisition of a topography, profile-map, cross-map, underground facilities map. All information of underground is demanded accurate location in other to prevent of accident of underground in subway construction. We must think about water lines, sewer lines, electronic lines, telephone lines, all urban gas-line because these are needed construction the subway. And attributes of underground facilities recorded on topography are characteristics. length, width. number, position, and depth of the lines. We have to record these attributes because these are very important to design map on subway construction. If we develop GIS (Geographic Information System) to use the exact in-formation of the underground facilities, we can be management safely and prevent very dangerous accident as fast as possible. In this study, attribute informations are linked geographic informations about underground facilities and we can develop Underground Facilities Management System(UFMS) to analysis dangerous region through dangerous degreed and predict accident range with these informations.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2023.05a
• /
• pp.401-401
• /
• 2023

터널이나 폐기물저장소와 같은 지하 구조물 또는 지표에서부터 상당한 깊이로 설계되거나 건설되는 구조물을 계획하거나 건축할 때 구조물의 안전성에 영향을 주는 수많은 요인 중에 간과할 수 없는 것이 바로 지하수이다. 뿐만 아니라 지상 혹은 지하에서 오염이 발생하여 오염물질이 지중환경으로 유입되는 경우, 지하수 거동은 오염물의 이송·확산에 지대한 요인으로 작용한다. 최근에는 지구온난화와 같은 유례없는 기후변화를 경험하고 있고, 따라서 수자원으로써 지하수의 역할이 더욱 중요해지고 있다. 지하수의 저류와 거동은 지하매질의 특성에 지배되고 있지만, 지표 아래 자리잡고 있는 매질의 특성을 정확히 파악하기란 매우 힘들고, 따라서 지하수 거동을 해석함에 항상 불확실성이 존재한다. 전통적으로 지하매질의 특성을 이해하기 위해 다양한 지구물리탐사를 수행하여 왔고, 더욱 직접적인 관찰을 위해 시추를 수행하여, 시료를 수집·관찰하고, 시추공에서의 다양한 현장수리실험을 통해 수리특성을 알고자 하였다. 하지만 그동안의 다양한 노력에도 불구하고, 지하매질 및 지하수 거동에 대한 불확실성은 여전히 줄어들지 않고, 오히려 증가하고 있다. 따라서, 본 연구에서는 지하수 거동을 결정짓는 지하매질의 수리특성에 대한 불확실성을 정량화하기 위한 도구로써, 매개변수 보정법의 하나인 Pilot Point Method(PPM)을 소개하고자 한다. 우물 또는 관측정을 통해 관측되는 지하수의 수위는 지하매질의 특성을 반영하고 있으며, 인간이 가장 쉽게 취득할 수 있는 지하 정보에 해당한다. 지하수 수위를 이용하여 수치모형의 매개변수를 보정하게 되며, 이 때 PPM이 적용된다. Pilot points의 공간적인 분포에 따라 다양한 보정 결과가 산출될 수 있으며, 다양한 결과들을 통해 변동계수를 산정한 후 수리특성의 불확실성이 높은 지역을 나타낼 수 있다. 본 연구를 통해 얻은 결과는 물리탐사 또는 시추 작업을 위한 위치 선정의 기초자료로 활용될 수 있다.

• Proceedings of the KAIS Fall Conference
• /
• 2010.05b
• /
• pp.1086-1088
• /
• 2010

본 연구는 지하 구조물의 내벽에서 발생하는 습윤(濕潤) 및 결로를 방지하는 내벽체에 관한 것으로, 사방으로 연결조립 가능한 벽체판넬의 한쪽을 수직 지지프레임에 끼움 조립한 상태에서 타카핀으로 벽체판넬 및 수직 지지프레임을 동시 관통하여 내벽에 고정한 후 상기 수직프레임에 다른 벽체판넬의 일측을 중첩되게 조립하는 방법으로 지하 구조물에 내벽체를 편리하게 시공할 뿐만 아니라 공기를 단축하며, 상기 내벽체의 구성부품이 매우 간소하면서 가격이 저렴하여 공사비를 대폭 절감할 수 있는 시공이 편리한 지하 구조물용 내벽체의 개발에 관한 것이다.

• Journal of the Korean GEO-environmental Society
• /
• v.16 no.9
• /
• pp.13-21
• /
• 2015

Recently, land subsidence and sinkhole are generated due to a change in the groundwater level in the city. For this reason, the necessity for management of stable underground water level is on the rise. In this study, it was conducted for the underground structure that passes through the lower of bus transfer center construction site to examine the influence on the stability for underground structures to changes in the groundwater level and effective stress, the coupled finite element analysis and structural analyses were performed to evaluate stability for underground structure. It is to secure stability for underground structures according to underground water level declines. In this way, effective construction management will be made by previewing and forecasting the influence on the ground behavior and adjacent structures due to changes in the groundwater level.

• 한국방재학회:학술대회논문집
• /
• 2009.02b
• /
• pp.166.2-166.2
• /
• 2009

• Magazine of korean Tunnelling and Underground Space Association
• /
• v.3 no.2
• /
• pp.63-67
• /
• 2001

최근 구조물의 안전과 관련하여 계측기술에 대한 관심이 고조되고 있으며, 시공중 계측 뿐 아니라 시공후 유지관리를 위한 구조물의 계측 사례가 증대되고 있다. 본 고에서는 영구계측을 위하여 고속철도용 터널에 적용된 유지관리 계측시스템을 소개함으로써 추후 터널의 유지관리 계측시스템을 구축하는데에 기초적인 자료를 제시하고자한다.

• Journal of Korean Tunnelling and Underground Space Association
• /
• v.11 no.2
• /
• pp.199-211
• /
• 2009

Development of underground space is actively performed globally for better life in the surface, and the scale of the space is increasing. Extreme care should be taken in the construction of the underground space in urban areas in order to avoid damage of adjacent structures and interference with existing underground space. In case of shallow tunnels, reinforcement of ground and structures is necessary to minimize the damage to structures due to excavation but any standard for optimum range of the reinforcement has not been established yet. In this paper, a series of numerical analyses have been performed for a 20 m diameter tunnel excavated underneath a structure to investigate the degree of damage of the structure according to vertical and horizontal spacing between the tunnel and structure. In addition to that, optimum range of reinforcement is presented for each case where reinforcement is required. It has been observed that the reinforcement is necessary for the ground condition adapted in the analyses as follows: (1) if horizontal spacing ($S_{H}$) approaches to 0D (D: equivalent diameter of tunnel) for vertical spacing (Sv) of 0.5D, and (2) if tunnel exists underneath the structure for vertical spacing (Sv) of 0.75D. The reinforcement is not necessary for Sv of 10 regardless of $S_{H}$. It also has been obtained that the optimum ranges of the reinforcement around structure foundation are 7 m in depth and whole width of the structure and 5 m beyond tunnel sidewall. These reinforcememt ranges have been confirmed to be enough for stability of the structure if types of reinforcement method is appropriately selected.

• Tunnel and Underground Space
• /
• v.22 no.2
• /
• pp.120-129
• /
• 2012

Recently, mining facilities have being installed in an underground space according to a social demand for environment-friendly mine development. The underground structures for mining facilities usually requires a large volume of space with width greater than height, and thus the stability assessment of the large-scale underground mine structure is an important issue. In this study, we analysed a factor of safety based on strength reduction method, and proposed a numerical design approach to determining the dimension of underground mine structures in combination with a strength reduction method and a multivariate regression analysis. Input design parameters considered in the present study were the stress ratio and shear strength of rock mass, and the width and cover depth of underground mine structures. The stabilities of underground mine structures were assessed in terms of factor of safety under different conditions of the above input parameters. It was calculated by the strength reduction method, and several kinds of fit functions were obtained through various multivariate regression analyses. Using a best-fit regression model, we proposed the charts which provide preliminary design information on the dimension of underground mine structures.

• Journal of the Korea institute for structural maintenance and inspection
• /
• v.21 no.2
• /
• pp.24-33
• /
• 2017

Domestic urban railway underground station structures, which were built in the 1970s ad 1980s, had been constructed as Cut-and-Cover construction system without seismic design. Because the trends of earthquake occurrence is constantly increasing all over the world as well as the Korean Peninsula, massive human casualties and severe properties and structures damage might be occurred in an non-retrofitted underground station during an earthquake above a certain scale. Therefore, to evaluate the retrofit effect and soil-structure interaction of seismic retrofitted underground station, a centrifugal shaking table test with enhanced stiffness on its structural main member are carried out on 1/60 scaled model using the Kobe and Northridge earthquakes. The seismic retrofitted members, which are columns, side walls, and slabs, are evaluated to comparing with existing non-retrofitted centrifuge test results Also, to simulate the scaled ground using variation of shear velocity according to site conditions such as ground depth and density, resonant column test is performed. From the test results, the relative displacement behavior between ground and structures shows comparatively similar in ground, but is increased on ground surface. The seismic retrofit effects were measured using relative displacements and moment behavior of column and side walls rather than slabs. Additionally, earthquake wave can be used to main design factor due to large structural deformation on Kobe earthquake wave than Norhridge earthquake wave.

• Tunnel and Underground Space
• /
• v.28 no.4
• /
• pp.293-303
• /
• 2018

Monitoring is the act of collecting and analyzing accurate engineering information using various methods and instruments. The purposes of the monitoring are design verification, construction management, quality control, safety management, and diagnose of structure etc.. The diagnose evaluation of the geotechnical structures corresponds to the confirmation of the structural performance. It is aimed to judge the soundness of geotechnical structures considering the degree of damage due to the environmental change and elapsed time. Recently, microseismicity, which is widely known in Korea, can be used for safety management and diagnoses of structure as it detects the micro-damage without disturbance of the structure. This report provides guideline on the procedure for assessing an underground oil storage cavern using microseismic monitoring techniques. Guidelines cover the selection of monitoring systems, sensor array, sensor installation and operation of systems, and interpretation.