• 한국지구물리탐사학회:학술대회논문집
• /
• 2005.05a
• /
• pp.129-136
• /
• 2005

The groundwater survey was carried out by electrical resistivity and resistivity tomography using several kinds of electrode array to delineate the depth of the saturated zone and basement complex, the aquifer system of fractured rock, and the 2-D resistivity structure was obtained by inversion technique. And the hole-to-surface and crosshole tomography were applied for two boreholes and the inverted resistivity tomogram are obtained. The comparison of those data with core logging data was performed and those results were relatively well correlated. And it was possible to find out the configuration of basement and the fracture zone and the aquifer system from the 2-D resistivity structure and resistivity tomogram.

• Journal of Korean Tunnelling and Underground Space Association
• /
• v.18 no.1
• /
• pp.83-94
• /
• 2016

Utility tunnels have been employed in Korea since the 1970s and start to make trouble with structural safety and serviceability. Recently, tunnel enlargement has consequently been proposed due to the impending problems. However there are little study on box type utility tunnels except traffic tunnels. A 2D finite element analysis was conducted to evaluate ground behavior which depends on enlargement size and stiffness by one-side enlargement of the utility tunnel. Settlement scale increased with larger enlargement size and less stiff ground conditions. The observed settlement characteristics due to enlargement are similar to that suggested by Clough & Schmidt (1981). The settlement width is more affected by enlargement size than ground condition.

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.40 no.1
• /
• pp.1-14
• /
• 2022

In order to conduct rapid, accurate and safe surveying at the excavation site, In this study, the possibility of underground facility survey using drones and the expected effect of 3D visualization were obtained as follows. Phantom4Pro 20MP drones have a 30m flight altitude and a redundant 85% flight plan, securing a GSD (Ground Sampling Distance) value of 0.85mm and 4points of GCP (Groud Control Point)and 2points of check point were calculated, and 7.3mm of ground control point and 11mm of check point were obtained. The importance of GCP was confirmed when measured with low-cost drones. If there is no ground reference point, the error range of X value is derived from -81.2 cm to +90.0 cm, and the error range of Y value is +6.8 cm to 155.9 cm. This study classifies point cloud data using the Pix4D program. I'm sorting underground facility data and road pavement data, and visualized 3D data of road and underground facilities of actual model through overlapping process. Overlaid point cloud data can be used to check the location and depth of the place you want through the Open Source program CloudCompare. This study will become a new paradigm of underground facility surveying.

• Journal of Korean Tunnelling and Underground Space Association
• /
• v.11 no.2
• /
• pp.175-188
• /
• 2009

When a new tunnel is excavated by the drill and blast method near pre-existing underground structures or tunnels due to the region restricted condition such as urban area, the ground will be relaxed by the excavation. In this case, issues can be created in terms of stability of pre-existing underground structures. One of major factors determining the stability of pre-existing underground structures can be a separation distance between pre-existing underground structures and a newly excavated tunnel. The region of ground relaxation defined by the plastic zone due to new excavation can be varied by separation distance. In this study, in other to estimate an influence of new tunnel excavation in terms of separation distance on the stability of pre-existing large pipelines, two-dimensional scaled model tests using plaster were performed for six models which have a different separation distance, The results show that based on the analysis of induced displacement during tunnel construction, the displacement decreases as the separation distance between large pipeline and new tunnel is increased until the distance is 2.5 times of pipeline diameter. Beyond this point, however, the displacement has become stabilized.

• Tunnel and Underground Space
• /
• v.23 no.6
• /
• pp.457-469
• /
• 2013

We have analyzed the regional in-situ stress pattern using 460 stress measurement data at about 100 test sites in Korea, and suggested correlation equations of stress-depth and stress ratio-depth. We made Korea Stress Map(KSM) as in-situ stress fields of the Korean peninsula, combining with a paleo-stress analysis according to the geological period and a stress estimation from focal mechanism. We confirmed the reliability and applicability of correlation equations derived in this study, comparing with worldwide stress-depth patterns, and also estimated the pattern of in-situ stress fields of north-eastern Asia including Korea, China and Japan, comparing with World Stress Map.

• Journal of the Mineralogical Society of Korea
• /
• v.23 no.1
• /
• pp.39-50
• /
• 2010

Zeolites were formed by the alteration of volcanic glass in the volcaniclastics including tuff cone/rings and subsurface Seoguipo Formation, Jeju Island. Phillipsite and analcime were identified by X-ray diffraction and electron microprobe analysis. Si/(Si+Al) atom ratios of analcime and phillipsite were similar to that of parent basaltic glass. In comparison with the simple chemistry of analcime, phillipsite showed a range of cavity cation compositions. Na is the major cavity cations of phillipsite in the Dangsanbong and Yongmeori tuffs bearing analcime, while K and Ca in core samples of Seoguipo Formation. Microtextural analysis by scanning electron microscope showed a general sequence that early phillipsite encrustification of pores was followed by later analcime infilling. Zeolites are abundant in the older tuff cone/rings but nearly absent in the younger ones.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.11 no.1
• /
• pp.1-8
• /
• 1991

Recently, researches for buried lifelines such as pipelines have been carried out to provide for safe design. On of the major causes to the damage of buried pipelines has been soil liquefaction. Analytical models have been presented to compare with the results from recent model experiment under a soil liquefaction environment induced by seismic shaking table. The analytical results were more than two times those those of experimental measurement. Thus the objective of this study is to introduce a rigorous nonlinear analysis of equation of motion with more realistic parameters which are dynamic soil and water pressure, dynamic subgrade reaction coefficient, and damping coefficient for soil liquefaction environment.

• Korean journal of applied entomology
• /
• v.33 no.4
• /
• pp.237-241
• /
• 1994

Surveys were conducted in 66 ginseng fields damaged by insect and other an~mal pests from 1984 to 1993. Holohichio rnoroso, Holotrichio dromphalio, Holotrichia titonis Malodera orientaliq Ectinus sericeus, Gyllotalpa ofricana, Teleog~iluse mmo, Ostrinio furnacoii* Agrotis tokionis, Marnestro brassicae, Hydrellia griseolo, unidentified stem maggo$, Pseudococcus comstocki (13 species of insects). Deroceras uarions (slug), Acusta despecta sieboldiona (snail), probably two species of rats. and pheasant species were ascertained to damage ginseng plants M them, Holotrich~a morosa, Holotrichia diomphalia, Gryliotaipo africanq Deroceras uarions, Acusto despech siebaldiano showed higher frequencies. Underground (root) damage occul~ed mainly in spring penod (MayJune) and fall period (September-Odober) in 2-year-old glnseng fields at slopes, and aboveground (leaf and stem) damage occurred mainly in spring period in 3 or more-year-old ginseng iields mulched with rice straws at plains. Three ginseng fields were abolished due to heavy underground damage.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2015.05a
• /
• pp.463-463
• /
• 2015

최근 들어 빈번히 발생하는 이상기후에 의한 국지성 집중호우로 내수배제 불량에 따른 도시지역의 내수침수 피해가 잇따르고 있으며, 이로 인한 대책으로 도시지역의 노후화된 우수관거 교체 및 저류시설의 설치 계획이 이루어지고 있다. 그러나 국내 대도시의 경우 저류시설 설치를 위한 부지 확보가 어렵고 우수관거 교체를 위한 예산확보가 어려운 실정이므로 도시지역에서의 홍수피해를 저감하기 위한 우수관거 및 저류시설의 합리적이고 효율적인 설계 기준이 필요하다. 따라서 도심지의 치수능력 향상과 예산 절감을 시킬 수 있는 기존의 우수관거를 연계한 저류지 설계가 필요하다고 판단된다. 따라서 본 연구에서는 기존 우수관거를 연계한 저류지인 간선저류지(가칭)를 설치한 것을 가정하여 연구를 진행하였다. 간선저류지란 도시에 설계빈도 이상의 강우 발생으로 관거의 허용용량을 초과하는 유량에 대해 기존 관거와 연결된 지하저류지에 임시로 저류시켜 내수침수를 방지하기 위한 구조물로 간선저류지에서 저류된 우수는 흐름이 원활한 하류의 맨홀이나 수위가 안정적인 하천으로 자연방류시킨다. 또한 간선저류지는 관거의 허용용량을 초과하는 구간에서 초과용량에 맞게 소규모로 설계되며 기존의 지하구조물에 간섭이 없도록 설계하여 설치하는게 기본 개념이다. 본 연구에서는 최근 내수침수피해가 발생한 강남역을 대상유역으로 선정하여 유출분석을 진행하고 집중호우시 유역내 기존 우수관거의 통수능 검토 및 침수피해 지역을 검토하였다. 또한 관거의 과부하가 심한 구간을 중심으로 저류지의 용량 및 개수 등을 고려한 분석을 통하여 간선저류지 설치로 인한 관거의 여유용량 및 간선저류지의 저류효과를 검토하였다.

• Proceedings of the Korean Institute of Building Construction Conference
• /
• 2021.11a
• /
• pp.194-195
• /
• 2021

Due to urban regeneration projects or changes in the living environment, there is an increasing need to demolish old buildings that have lost their functions. Demolition of above ground and underground structures is an important construction project that greatly affects the construction period and safety of the entire process. However, it is difficult for the safety officer to manage the demolition work due to the lack of specific and diverse data applicable to the site of the demolition plan. Therefore, in this study, items that need to be improved in structural safety when the above-ground and underground structures are demolished are reviewed and organized. For the main contents of structural safety management in demolition work, 1) structural review reflecting the order of demolition work, 2) installation and dismantling of steel pipe scaffolding and dust nets, 3) installation and dismantling of system scaffolding, 4) installation and dismantling of fall prevention nets, 5) jack support Installation and dismantling, 6) movement of equipment, movement and planning between floors, 7) equipment for demolition of structures, height of remnants, 8) site cleanup, and 9) equipment operators were categorized and arranged.