• Journal of the Korean Association of Geographic Information Studies
• /
• v.9 no.2
• /
• pp.159-172
• /
• 2006

In this study, the series of Landsat TM/ETM+ images was acquired to extract land surface temperature for wide-area and executed geometric correction and radiometric correction. And the land surface temperature was extracted using NASA Model, and achieved the first correction by performing land coverage category for study area and applied characteristic emission rate. Land surface temperature which was acquired by the first correction was analyzed in correlation with Meteorological Administration's temperature data by regression analysis, and established correction formula. And I wished to improve accuracy of land surface temperature extraction using satellite image by second correcting deviations between two data using establishing correction formula. As a result, land surface temperature acquired by 1st and 2st correction could be corrected in mean deviation of about ${\pm}3.0^{\circ}C$ with Meteorological Administration data. Also, I could acquire land surface temperature about study area by higher accuracy by applying to other Landsat images for re-verification of study results.

• Proceedings of the KSRS Conference
• /
• 2007.03a
• /
• pp.320-325
• /
• 2007

인간의 보다 질 높은 생활관을 추구하기 위하여 친 환경적인 산업개발 및 환경 복원 사업에 대한 노력이 최근 들어 끊임없이 지속되고 있다. 본 연구에서는 서울시 청계천을 대상으로 청계천 복원 전과 복원후의 지표 열 분포도를 작성하고 이를 기반으로 청계천 복원 전${\cdot}$후의 지표 열 변화를 분석하였다. 아울러 지표온도와 현지 관측 자료인 AWS 자료와의 비교 분석을 수행하여 지표온도와 대기온도 차를 도출하였다. ASTER 영상 열적외센서(TIR) 와 GIS 를 활용하여 도시 지표면의 온도를 추출하고, AWS 기 상관측자료와의 상관성 분석 함으로써 도심의 지역적 인 지표 열 패턴과 국지적인 기후연구에 활용가능성을 제시하고자 한다.

• Proceedings of the KSRS Conference
• /
• 2008.03a
• /
• pp.125-130
• /
• 2008

Mid-Infrared (MIR) 영상은 화산 활동 및 산불로 인한 재난관측, 지표물질 관측, 해수 온도 측정과 같은 분야들에서 사용되고 있다. 그러나 MIR영역은 지표의 복사율과 대기의 영향으로 인한 변화가 매우 심하고, 낮 영상의 경우 태양 복사량에 의한 영향도 고려해야 하는 어려움이 있다. 따라서 단일밴드인 MIR영상을 이용하여 표면온도를 얻기 위해서는 영상이 취득된 시간과 장소에서 관측된 태양 복사량 및 여러 가지 대기 변수가 필요하다. 본 연구의 목적은 기존의 MIR 영상 연구가 다중밴드를 기반으로 한 것과 달리 단일 밴드의 영상을 이용하여 표면온도를 측정하는데 있다. 이를 위하여 MODIS MIR 영상을 대상으로 MODTRAN을 사용하여 MIR 영역의 대기보정 기법을 적용 한 뒤 복사전달 모델을 이용하여 지표의 복사량을 측정하였다. 획득된 지표온도 영상의 정밀도를 측정하기 위해서 기존의 온도 알고리즘인 split-window algorithm에 의해 얻어진 해수온도 영상과의 비교를 통하여 오차 원인에 대해 분석을 실시하였다. 그 결과 낮 영상의 경우 -4.19${\pm}$1.19$^{\circ}C$ 정도의 온도 차가 났으며, 밤 영상의 경우 0.5$^{\pm}C$0.39$^{\circ}C$ 정도로 비교적 좋은 결과를 보였다. 이는 낮 영상의 경우 지표의 복사율에 대한 온도의 민감도가 매우 높기 때문에 높은 오차가 발생하지만, 밤 영상의 경우 태양빛에 의한 영향이 없으므로 좋은 결과를 나타내기 때문이다. 따라서 단일밴드 MIR영상을 이용한 지표온도 추정 시 대기에 의한 영향보다 지표 복사율에 의한 영향이 높다고 추정할 수 있다.

• The Journal of the Korea Contents Association
• /
• v.12 no.11
• /
• pp.482-491
• /
• 2012

Because the satellite imagery can detect the radiative heat from the surface using the thermal IR (TIR) channel, there have been many efforts to verify the relationship between the land surface temperature (LST) and urban heat island. However, the relationship between geomorphological characteristics like surface aspects and LST is relatively less studied. Therefore, the geomorphological elements, for example, surface aspects and surface slopes, are considered to evaluate their effects on the change of the surface temperature distribution using the Landsat 7 ETM+ TIR channel and the possibility of the image to detect anthropogenic heat from the surface. We found that the surface aspect is ignorable but the surface slope with the sun elevation influences on the surface temperature distribution. Also, the radiative heat from the surface to the atmosphere could not be accurately recorded by the satellite image due to the surface slope but the slope correction process used in this study could correct the surface temperature under slope condition and the slope correction, in fact, was not influenced on the average temperature of the surface. The possibility of the anthropogenic heat detection from the surface from the satellite imagery was verified as well.

• Journal of the Korean Association of Geographic Information Studies
• /
• v.8 no.2
• /
• pp.21-30
• /
• 2005

The primary purpose of this paper is to prove a clear relationship among land use type, vegetation level and surface temperature. For this purpose, this paper presents series of spatial distribution maps of the three features obtained through the visual interpretation of digital images. The result of study tells us that the spatial distribution of the vegetation level is very similar with that of surface temperature. By analyzing the relationship between surface temperature and land use types, this study categorizes the eighteen urban land uses into 7-8 groups according to their average surface temperature. The Duncan test was conducted to categorize the land uses. The surface temperature of manufacturing related land use is the highest, semi-residential use is the next, non-residential land use is the next to the lowest, and the agricultural and forest land use is the lowest. This paper provides another strong evidence of the relationship by showing the regression result.

• Korean Journal of Remote Sensing
• /
• v.20 no.6
• /
• pp.397-408
• /
• 2004

In this study, surface temperature which was extracted from Landsat TM band 6 was compared and analyzed with the AWS(Automatic Weather System) observation data for studying urban heat environment properties with possibility of remote sensing data application. In order to verification of the distribution properties of urban surface temperature, correlation analysis between surface temperature and NDVI, the distribution properties of urban surface temperature by land use/cover patterns were carried out by GIS spatial analysis techniques. The results presented that the spatial distribution of urban surface temperature was very different depending on various land use/cover patterns of surrounding areas. Also there was the reverse linear relationship between surface temperature and NDVI. These results will be worked as one of the major factors for environmentally sustainable urban planning considering the characteristics of weather environments in the near future.

• Journal of Wetlands Research
• /
• v.13 no.2
• /
• pp.265-273
• /
• 2011

Hyporheic zone, where groundwater-stream water mixing occurs, sensitively responds to heat of groundwater and stream water temperature. Variation of stream water temperature has short time period and time dependent, because stream water temperature is influenced by daily fluctuation and seasonal air temperature. On the other hand, groundwater temperature is insignificant. In this study, we conducted 1-dimensional heat transfer analysis. The results show that there are differences of temperature distribution between gaining stream and losing stream with flux in hyporheic zone. Especially, variations of hyporheic water temperature show a significant difference in adjacent streambed, Also, the results shows that distribution of temperature was more affected by groundwater direction than intensity of flux.

• Journal of the Korean Regional Science Association
• /
• v.31 no.3
• /
• pp.99-112
• /
• 2015

Observation of land surface temperature in industrial areas is problematic, as it is not possible to construct a network of weather stations with sufficiently high density and continuous operation in such zones. Multiphase remote sensing data that cover a wide area and take a short time to process can enable the user to precisely and continuously measure the current and changing land surface temperatures in a certain region. Jeollanam-Do in South Korea is undergoing rapid industrialization, with the establishment of a number of industrial complexes, such as the Gwangyang Steelworks, Yeosu Industrial Complex, Yulchon Industrial complex, and Daebul Industrial Complex. To look into the properties of industrial complex's temperature, this study uses the thermal band of Landsat 7 ETM+ images acquired under thermal infrared wavelengths in order to calculate and compare the surface temperatures of the four above-named industrial complexes. From this, it is possible to obtain the basic information about industrial complex for environmental and natural resource management, which will aid industrial complex planners in developing methods of addressing environmental problems.

• Journal of Korean Society for Geospatial Information Science
• /
• v.13 no.4 s.34
• /
• pp.59-65
• /
• 2005

It is very important to detect land cover/land use change from the past and to use it for future urban plan. This paper investigated the application of Landsat satellite imagery for detecting urban growth and assessing its impact on surface temperature in the region. Land cover/land use change detection was carried out by using 30m resolution Landsat satellite images and hierarchial approach was introduced to detect more detail change on the changing area through high resolution aerial photos. Also, surface temperature according to land cover/land use was calculated from Landsat TM thermal infrared data and compared with real temperature to analyze the relationship between urban expansion and surface temperature. As a result, the urban expansion has raised surface radiant temperature in the urbanized area. The method using remote sensing data based on GIS was found to be effective in monitoring and analysing urban growth and in evaluating urbanization impact on surface temperature.

• Science of Emotion and Sensibility
• /
• v.16 no.3
• /
• pp.311-318
• /
• 2013

This research examined the validity of whether the PMV index-based comfort- or uncomfort-indoor environments could be classified by the facial skin temperature, one of the physiological indicator for human. To do this, we distinguished between a comfort thermal environment and an uncomfort thermal environment using the PMV value, and then facial skin temperatures were measured in both environments. As a result, the facial skin temperature of occupants were different between the comfort- and uncomfort-indoor environments. It suggested that the facial skin temperature could be used in shaping the comfortable indoor environment based on the PMV index. While this result suggested the PMV index-based on comfort and uncomfort indoor environments could not be valid, because the facial skin temperature was lower in the uncomfort thermal environment than in the comfort thermal environment.