• Journal of Digital Convergence
• /
• v.14 no.3
• /
• pp.1-12
• /
• 2016

The definition of digital poverty has not been changed since it was used at the first digital divide survey in 2000s. The objective of this study is to reexamine and redefine digital poverty targets of digital divide survey. This study examines the present state for the target of the digital divide survey focusing on Disabilities, Low-Income and Elders and then redefines digital poverty for them. The results suggest to reexamine 15 types of disabilities by the revised the Disabled Welfare Law as digital divide targets, rather than limiting to physical, brain, hearing and visual disabilities. For the low-income target, people on the second-to-the bottom income bracket as well as those on basic welfare should be included as the target of low-income people for digital poverty. The age of the elder target for digital poverty should be adjusted to sixty-five or more in the era of aging population.

• Journal of Digital Convergence
• /
• v.14 no.11
• /
• pp.241-247
• /
• 2016

As a domestic traffic control signal system, either the system with which a traffic signal turns into green at regular intervals or the system with which an amber or a red signal flickers on local roads without heavy traffic at midnight has been utilized. However, when the former system is used for roads with light traffic at midnight, delays and congestion can be incurred. Besides, in case of the latter signal system, the risk of vehicle crash is high. This study proposes a response type of flickering green signal system that rearranges signal system after analyzing beacon messages including sensor data. The proposed system, on a trunk road or a branch road at midnight, makes the signal keep flickering in green; When a vehicle enters the range of RSE, the transfer coverage, it transmits beacon messages regularly and Agent System analyzes the messages and alters the signal. It is a system by which vehicles move following the altered signal system, which will not only ensure smooth flow but also prevent vehicles from crashing on a road with light traffic. As a result of a simulation, traffic throughput and the average waiting time displayed 10 to 30 percent better improvement than existing signal systems, in terms of performance.

• Journal of the Korea Organic Resources Recycling Association
• /
• v.10 no.2
• /
• pp.65-70
• /
• 2002

The previous studies showed that rumen microorganisms had an enhanced waste-degrading capability and controlling the dilution rate was very effective in improving acidification efficiency. Generally the composition of food waste has a small deviation value, but one of the waste components (grains, vegetables or meats) can be increased dramatically depending on a seasonal variation. Thus, it is important to evaluate the efficiency of acidogenic fermentation in this case. Each component was spiked to be 80% of the total waste in R1 (grains), R2(vegetables), and R3 (meats). In Rl, rapid degradation occurred during the initial two days. R2 showed similar performance to that of general food waste. In R3, degradation retarded in the initial stage and then increased after controlling the dilution rate. The acidification efficiencies of the reactors were 88.7 (R1), 73.5 (R2), and 62.1% (R3), respectively. Therefore, the fermentation efficiency was kept over 62% regardless of waste components, indicating that it was stable to acidify food waste by employing rumen microorganisms and controlling the dilution rate.

• Journal of Korean Society of Environmental Engineers
• /
• v.28 no.3
• /
• pp.292-299
• /
• 2006

Batch experiments were performed to evaluate the effects of the electron donor dosage and the initial biomass on the reductive dechlorination of perchloroethene(PCE) with benzoate as an electron donor. When benzoate was added less than the theoretical requirement for dechlorination(electron donor/acceptor ratio=0.5 and 1), the dechlorination efficiency increased from 71% to 94.3% with the increase in benzoate dosage, but the fraction of electron equivalent utilized for dechlorination decreased from 92.7% to 79.6%. Methane production was observed when the hydrogen concentration was higher than the threshold value(10 nM) after PCE and trichloroethene (TCE) were reduced to cis-1,2-dichloroethene(cDCE). When benzoate was added more than the theoretical requirement, the residual hydrogen converted into methane after the completion of dechlorination. The increase in the seeding biomass shortened the lag time for dechlorination, but it did not affect the maximum dechlorination rate as it was mainly governed by the benzoate fermentation rate. When the seeding biomass concentration was high, active dechlorination during the early period increased dechlorination efficiency while decreasing methane production.

• Journal of Korean Society of Environmental Engineers
• /
• v.27 no.5
• /
• pp.491-498
• /
• 2005

J sewage treatment plant (WWTP) in Busan has used methanol as an external carbon source for the biological denitrification process. Methanol is widely used. but rather expensive and very dangerous in handling. Therefore, it has been required that the economic alternative carbon source must be developed. By-product from a fine chemical industry can be Purified by removing high molecular weight substances using the ultrafilter membrane separation process and RBDCOD fraction becomes $98{\sim}99%$ of COD substances in the purified by-product. The purified by-product containing three types of alcohols, methanol, prophylenglycol and methoxypropanol; showed similar chemical characteristics to the methanol, a main external carbon source, in biodegradation pathway. Shown above, the compatibility between main and alternative carbon sources has been achieved. Also very short or no adaptation period is necessary in the case of exchanging these carbon sources. The compatibility between external carbon sources is an essential element for stabilizing WWTP operations. During the full-scale application test of the by-product, the alternative carbon source line got on par with the treatment efficiency of the methanol line. With the test result, J-WWTP changed methanol to a fine chemical by-product, in two out of three J-WWTP lines. Moreover, it is expected that 55.4% of the external carbon source cost reduction can be achieved in the alternative carbon source applied lines.

• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.1 no.1
• /
• pp.58-69
• /
• 2002

Most of the traffic accidents are a rear-end collision and a clash generated in the signalized intersection on the local roads. So, it is demanded that the high-quality of signal control and dilemma zone control. According to the cases generated by foreign countries, we established the strategies which are composed of Volume-Density Control, strategy of the dilemma zone control using R-detector (microwave detector) In Japan and EC-DC Control. MOEs(Measure of effectiveness) are car numbers in the dilemma zone , max-out probability in the safe side and the average stopping delay in the progress side. We choose a signalized intersection in rural highway to analyze the effect of the strategies and practiced an on-the-spot survey. The result of the survey is applied to the basic data in the simulator. Consequently, strategy of the dilemma zone control using R-detector(microwave detector) in Japan is the best effective in the safe side and EC-DC control is the best in the progress side. Based on the result, we developed the effective strategy of the signal control . This strategy is composed of the strategy of Japan and the detector on the stopping line used in the EC-DC control. On the result of the analysis, new strategy is the best effective in two sides.

• Journal of Korea Water Resources Association
• /
• v.47 no.9
• /
• pp.777-787
• /
• 2014

Stormwater pipe systems are most commonly used to discharge rainwater from the urban catchment covered by the impervious area. To design stormwater pipe and rainwater pumping station, frequency analysis is implemented using historical rainfall and the design rainfall is timely distributed using theoretical shape such as Huff distribution. This method cannot consider the rainfall intensity variation caused by climate change which is type of uncertainty. Therefore, in this study, runoff from Gasan1 stormwater pumping stations catchment is calculated using design rainfall distributed by the 2nd quartile distribution method and the historical rainfall events. From the analysis, the nodal flooding in the urban catchment is likely caused by the high peak rainfall event rather than the large amount of rainfall. The linear regression analysis is implemented. As a result, when several storms have the same amount of rainfall, the nodal flooding in the stormwater pipe systems could be caused by the high peak of storm events. Since as the storm duration become short, the peak rainfall become high, the nodal flooding likely become severe with the short storm duration. The uncertainty in the peak data of design rainfall is analyzed and this uncertainty has to be consider in the stormwater pipe design process.

• Journal of Korean Society of Forest Science
• /
• v.89 no.2
• /
• pp.161-166
• /
• 2000

Classified handmade Korean paper which has been commonly used as the material for the paper cultural assets divide into four classes. We irradiated xenon arc lamp, which has almost the same spectrum distribution as natural sunlight, to test photo-induced of discoloration according to PEG molecular weight and concentration. So, we reach the followings. 1) Unbleached handmade Korean paper with PEG showed rapid decrease of brightness for 10 hours after photo-irradiation, regardless of molecular weight of PEG, but, after 10 hours, it showed gradual increase of brightness. From this, it proved that there was an effect of preventing discoloration of photo-irradiation. 2) Chemical bleached handmade Korean paper showed increase of brightness after 20 hours. Though time was delayed in increase of brightness, there was also an effect of preventing discoloration of photo-irradiation in chemical bleached paper. 3) Handmade Korean paper made with abet-mosk showed the lowest of brightness when it was tested on 400-20% PEG. Before photo-irradiation, the brightness of paper, applied it, was the lowest, but it showed the least difference of brightness after photo-irradiation. From this, it proved that there was the greatest effect of preventing discoloration in this paper. 4) Preventing yellowish, the first phenomena by photo-irradiation ageing with applying PEG was proved that there was the decrease of value of $b^*$ +, and increase value of $L^*$, which could fairly prevent decrease of brightness.

• Journal of the Korean Geosynthetics Society
• /
• v.10 no.1
• /
• pp.53-61
• /
• 2011

This study was conducted to confirm the adsorption capacity of CFW(Carbonized Foods Waste), which is produced by the process of recycling waste, in PRB method that Electrokinetic(E/K) method was applied. The batch test was carried out to analyze the adsorption characteristics of CFW for adsorbing the organic compounds. The organic compounds used in the batch test were Phenanthrene and Trichloroethylene(TCE), and the anionic surfactant(SDS) and the nonionic surfactant(Brij$^{(R)}$30) were used for the surfactants. The results of the batch test confirmed that the adsorption efficiency of Phenanthrene was 99% and TCE was 26%. The each compounds compared with the adsorption isotherms, which is calculated by the Langmuir and Freundlich models. The results indicated that Phenanthrene is fitted to the linear Langmuir model, whereas the distribution of TCE is unclear. The results of the batch test used in surfactants confirmed that the adsorption efficiency of CFW using Phenanthrene was reduced to 6~8%. However, the adsorption efficiency of CFW in TCE was increased up to 81% by surfactants. Especially, the nonionic surfactant was excellent in the adsorption of CFW using TCE. Nevertheless, the adsorption efficiency of CFW in Phenanthrene was still higher than TCE. Therefore, the adsorption efficiency of CFW in Phenanthrene was better than in TCE. In PRB method using E/K method, the adsorption of CFW used nonionic surfactant is better to use than the anion surfactants on the organic compounds.

• Geotechnical Engineering
• /
• v.8 no.2
• /
• pp.5-20
• /
• 1992

The physical-based and lumped-parameter hydrologic groundwater flow model for predicting the rainfall-triggered rise of groundwater levels in hillside slopes is developed in this paper to assess the risk of landslides. The developed model consists of a vertical infiltration model for unsaturated zone linked to a linear storage reservoir model(LSRM) for saturated zone. The groundwater flow model has uncertain constants like soil depttL slope angle, saturated permeability, and potential evapotranspiration and four free model parameters like a, b, c, and K. The free model parameters could be estimated from known input-output records. The BARD algorithm is uses as the parameter estimation technique which is based on a linearization of the proposed model by Gauss -Newton method and Taylor series expansion. The application to examine the capacity of prediction shows that the developed model has a potential of use in forecast systems of predicting landslides and that the optimal estimate of potential 'a' in infiltration model is the most important in the global optimum analysis because small variation of it results in the large change of the objective function, the sum of squares of deviations of the observed and computed groundwater levels. 본 논문에서는 가파른 산사면에서 산사태의 발생을 예측하기 위한 수문학적 인 지하수 흐름 모델을 개발하였다. 이 모델은 물리적인 개념에 기본하였으며, Lumped-parameter를 이용하였다. 개발된 지하수 흐름 모델은 두 모델을 조합하여 구성되어 있으며, 비포화대 흐름을 위해서는 수정된 abcd 모델을, 포화대 흐름에 대해서는 시간 지체 효과를 고려할 수 있는 선형 저수지 모델을 이용하였다. 지하수 흐름 모델은 토층의 두께, 산사면의 경사각, 포화투수계수, 잠재 증발산 량과 같은 불확실한 상수들과 a, b, c, 그리고 K와 같은 자유모델변수들을 가진다. 자유모델변수들은 유입-유출 자료들로부터 평가할 수 있으며, 이를 위해서 본 논문에서는 Gauss-Newton 방법을 이용한 Bard 알고리즘을 사용하였다. 서울 구로구 시흥동 산사태 발생 지역의 산사면에 대하여 개발된 모델을 적용하여 예제 해석을 수행함으로써, 지하수 흐름 모델이 산사태 발생 예측을 위하여 이용할 수 있음을 입증하였다. 또한, 매개변수분석 연구를 통하여, 변수 a값은 작은 변화에 대하여 목적함수값에 큰 변화를 일으키므로 a의 값에 대한 최적값을 구하는 것이 가장 중요한 요소라는 결론을 얻었다.