• Journal of the Korean earth science society
• /
• v.32 no.3
• /
• pp.306-323
• /
• 2011

The purpose of this study is to analyse the origin of the terms for well-known minerals and rocks in South Korean, North Korean, English, Chinese and Japanese. All of the terms for mineral and rock have been standardized in English and Chinese, Whereas not all of the terms are standardized yet in Japanese, North Korean and South Korean. Although many Korean researchers have recognized the fact and tried to standardize the terms, most of the terms for minerals and rocks have been used without any research conducted on them, which made it impossible. The terms for minerals were mainly made based on some of 28 geologic properties: chemical composition, color, shape and material. The terms for rocks were mainly originated from some of their 30 geologic properties: mineral composition, origin of rock, material and surface. 23 of the 124 English terms were named after the names of men or location, Whereas only 3 terms were originated from a name of place in the Eastern countries. In the Eastern countries, the terms for some minerals or rocks often consist of more complex geologic properties, compared with English terms for the same ones. For the minerals with complex geological properties, in the Eastern countries, there are 28 terms on average, which is much more than 2 in English. There are 9.25 terms in average for the rocks with complex geological properties in the Eastern while only 5 terms exist in English. Some of the Korean terms are very difficult for students to recognize what they are because the terms were originated from Japanese or English terms, which were translated into Korean without consideration of Korean contexts. Therefore the terms of rocks and minerals need to be discussed about their meaning and relevance.

• The Journal of Engineering Geology
• /
• v.10 no.3
• /
• pp.273-275
• /
• 2000

Engineering Geology를 필자는 지질공학(地質工學)이라 한다. 지질공학은 지반(地盤)의 토질 및 암석의 거동을 역학적인 관점에서의 지질역학(地質力學, Mechanical Geology)과 공학적 판단을 가하여 실제의 공사 등에 응용되는 기초학문이다. 이 분야에서의 중요 부분은 토목 시공 과정 또는 시공후에 발생할수 있는 지질적 문제(지질약선대의 문제 및 지질역학적 문제)등 에 대한 조사연구인 것이다. 따라서 지질공학자는 암반의 기계적인 응답에 대한 요소들을 지질도에 표시하여 시공상의 문제점을 검토, 연구하여 착공여부를 결정하고 지반보강 또는 지질개선을 실시케한다. 문제 중 지반의 거동은 물질 자체의 성질과 불연속성면에 있다. 물질자체의 성질은 입자의 크기에 있고 구조적 집합성에 있는 것이다. 불연속성면은 미세한 균열에서 거대한 단층면에 이르기까지 존재하며, 구조지질역학적 성격에 있다. (중략)

• Proceedings of the KSEG Conference
• /
• 2004.03a
• /
• pp.23001-23094
• /
• 2004

댐의 항구적인 안전을 담보하기 위해서는 댐 구조물 자체가 안전하여야 함은 물론 댐 구조물의 기초를 이루는 지반이 충분한 차수성과 내하성을 가져야 하므로 이들의 특성을 규명하기 위한 지질조사는 매우 중요하다. 댐 지질조사의 목적은 댐의 기초지반, 댐 체 축조를 위한 재료원 및 저수지 주변지반 등에 대한 지질학적 특성을 파악하고, 댐의 설계와 시공에 필요한 지질공학적 제반 성질을 상세히 파악하는데 있다. (중략)

• The Journal of the Petrological Society of Korea
• /
• v.13 no.1
• /
• pp.16-33
• /
• 2004

By relating mineralogy, petrology and geochemistry to observed magnetic properties, an understanding of the geological factors that control magnetic signatures is obtained. Magnetic susceptibility measurements and geochemical analyses were carried out for 160 samples in the Jurassic to Cretaceous granitoids, which is distributed to Pocheon, Jipori, Geumsan, Namwon, Songnisan, Yongdam, Masan, Jindong, and Taebaeksan areas. The magnetic properties of igneous infusion in these granites reflect bulk rock composition, reduction-oxidation state, hydrothermal alteration which are controlled by tectonic setting, composition and history of the source region, depth of emplacement and nature of wall rocks.

• The Journal of Engineering Geology
• /
• v.4 no.2
• /
• pp.139-151
• /
• 1994

Rocks are composed of the discrete elements of microstructures such as different grains and microcracks. The studies of these microstructures are of increasing interest in engineering geology and civil engineering related to construction of a deep under-ground space. Accordingly, instead of a simplified continuum approach, discrete structural elements and mechanical properties of various grains must be accounted. But it is difficult to analyse crack and discontinuity surfaces in Euclidean geometry. So, Mandelbrot( 1983) developed fractal theory to manage irregular body in nature. In this study, geometrical properties of microstructures to estimate a relation between crack propagation and stress were calculated. Then it is shown that fractal theory can be applied to research real mechanical behavior of rocks.

• The Journal of Engineering Geology
• /
• v.14 no.1
• /
• pp.105-121
• /
• 2004

The purpose of this study is to investigate the relationship between petrographical and engineering properties of granitic rocks, widely used as building and ornamental stones in Korea, at the Namwon are a. This area is one of the most famous area as a domestic dimension stone production. The granitic rocks were examined for grain sizes, modal compositions and then same samples were tested to determine specific gravity, water absorption, porosity, uniaxial compressive strength, tensile strength, abrasive hardness, P-wave velocity, modulus of elasticity and Poisson's ratio. It is suggested that the influence of the grain size on the engineering properties is more important than that of the mode of mineralogical compositions. And quartz contents also significantly influence the engineering properties of granitic rocks.

• Economic and Environmental Geology
• /
• v.16 no.3
• /
• pp.149-161
• /
• 1983

Fuller's earth deposits from Miocene sedimentary sequences in Gyeong Sang-do contain up to 95% Ca-montmorillonite accompanied by cristobalite, clinoptilolite, mordenite, quartz, feldspar and X-ray amorphous material. Differential thermal analysis, infrared and electron microscopic data are given for the montmorillonite component. The ease with which the exchangeable calcium of the montmorillonite could be replaced by sodium (to give a product with properties similar to that of a bentonite) was monitored by the Atterberg liquid limit test. Some samples tested as possible binders for foundry moulding sands gave results that compared favourably with material currently being used for this application. Many of the samples also met the OCMA specifications for clays used in drilling muds.

• Proceedings of the Korean Society of Fisheries Technology Conference
• /
• 2001.05a
• /
• pp.101-103
• /
• 2001

가식성 및 생분해성 필름은 식품과 외부와의 물질이동을 차단하고, 영양성분, 향기성분, 항 산화제 등의 carrier 역할을 한다. 기존의 플라스틱 고분자 필름은 생분해성 필름에 비해 가격 경쟁력 및 물리적 성질이 우수하기는 하지만, 생분해성 필름은 단백질과 다당류 및 지질을 주원료로 하여 이들의 단독 또는 조합에 의해 만들어지고, 생물학적 분해가 용이하고 식용 가능하여 포장재로 인한 환경오염을 줄일 수 있다는 것이 생분해성 필름의 가장 큰 장점이다. (중략)

• Journal of the Korean Geophysical Society
• /
• v.7 no.4
• /
• pp.247-253
• /
• 2004

In this paper, 3D recognizing algorithm which is based on the external shape feature is presented. Since many objects have the regular shape, if we posses the database of pattern and we recognize the object using the database of the object's pattern, it is possible to inspect and/or recognize the objects of many fields. This paper handles on the 3D object recognition algorithm using the geometrical pattern matching by 3D database.

• Economic and Environmental Geology
• /
• v.17 no.4
• /
• pp.259-272
• /
• 1984

Fluid inclusion and stable isotope studies on the Sangdong tungsten skarn have led to a conclusion that the mineralizing fluids might be derived from a magma, which was inferred within 1km below the present Sangdong ore deposit. Mineral assemblages of the skarns appear to have formed under the equilibrium conditions as the fluids flow outward from a central fluid column, in which the quatz-mica occurs dominantly. A characteristic skarn showing mineralogical zonation by repeated over-prints. The quartz-mica zone at the central part of the Sangdong skarns shows the final stage of protracted fluid evolution. Thermodynamic conclusion based on simplified chemical compositions of major components may express quantitatively the conditions of the skarn formation by using diagrams.