• Economic and Environmental Geology
• /
• v.45 no.3
• /
• pp.317-333
• /
• 2012

The Yeongweol Group is a Lower Paleozoic mixed carbonate-siliciclastic sequence in the Taebaeksan Basin of Korea, and consists of five lithologic formations: Sambangsan, Machari, Wagok, Mungok, and Yeongheung in ascending order. Sequence stratigraphic interpretation of the group indicates that initial flooding in the Yeongweol area of the Taebaeksan Basin resulted in basal siliciclastic-dominated sequences of the Sambangsan Formation during the Middle Cambrian. The accelerated sea-level rise in the late Middle to early Late Cambrian generated a mixed carbonate-siliciclastic slope or deep ramp sequence of shale, grainstone and breccia intercalations, representing the lower part of the Machari Formation. The continued rise of sea level in the Late Cambrian made substantial accommodation space and activated subtidal carbonate factory, forming carbonate-dominated subtidal platform sequence in the middle and upper parts of the Machari Formation. The overlying Wagok Formation might originally be a ramp carbonate sequence of subtidal ribbon carbonates and marls with conglomerates, deposited during the normal rise of relative sea level in the late Late Cambrian. The formation was affected by unstable dolomitization shortly after the deposition during the relative sea-level fall in the latest Cambrian or earliest Ordovician. Subsequently, it was extensively dolomitized under the deep burial diagenetic condition. During the Early Ordovician (Tremadocian), global transgression (viz. Sauk) was continued, and subtidal ramp deposition was sustained in the Yeongweol platform, forming the Mungok Formation. The formation is overlain by the peritidal carbonates of the Yeongheung Formation, and is stacked by cyclic sedimentation during the Early to Middle Ordovician (Arenigian to Caradocian). The lithologic change from subtidal ramp to peritidal facies is preserved at the uppermost part of the Mungok Formation. The transition between Sauk and Tippecanoe sequences is recognized within the middle part of the Yeongheung Formation as a minimum accommodation zone. The global eustatic fall in the earliest Middle Ordovician and the ensuing rise of relative sea level during the Darrwillian to Caradocian produced broadly-prograding peritidal carbonates of shallowing-upward cyclic successions within the Yeongheung Formation. The reconstructed relative sea-level curve of the Yeongweol platform is very similar to that of the Taebaek platform. This reveals that the Yeongweol platform experienced same tectonic movements with the Taebaek platform, and consequently that both platform sequences might be located in a body or somewhere separately in the margin of the North China platform. The significant differences in lithologic and stratigraphic successions imply that the Yeongweol platform was much far from the Taebaek platform and not associated with the Taebaek platform as a single depositional system. The Yeongweol platform was probably located in relatively open shallow marine environments, whereas the Taebaek platform was a part of the restricted embayments. During the late Paleozoic to early Mesozoic amalgamations of the Korean massifs, the Yeongweol platform was probably pushed against the Taebaek platform by the complex movement, forming fragmented platform sequences of the Taebaeksan Basin.

• Geophysics and Geophysical Exploration
• /
• v.13 no.1
• /
• pp.31-39
• /
• 2010

The goal of automatic velocity analysis is to extract accurate velocity from voluminous seismic data with efficiency. In this study, we developed an efficient automatic velocity analysis algorithm by using bootstrapped differential semblance (BDS) and Monte Carlo inversion. To estimate more accurate results from automatic velocity analysis, the algorithm we have developed uses BDS, which provides a higher velocity resolution than conventional semblance, as a coherency estimator. In addition, our proposed automatic velocity analysis module is performed with a conditional initial velocity determination step that leads to enhanced efficiency in running time of the module. A new optional root mean square (RMS) velocity constraint, which prevents picking false peaks, is used. The developed automatic velocity analysis module was tested on a synthetic dataset and a marine field dataset from the East Sea, Korea. The stacked sections made using velocity results from our algorithm showed coherent events and improved the quality of the normal moveout-correction result. Moreover, since our algorithm finds interval velocity ($\nu_{int}$) first with interval velocity constraints and then calculates a RMS velocity function from the interval velocity, we can estimate geologically reasonable interval velocities. Boundaries of interval velocities also match well with reflection events in the common midpoint stacked sections.

• Korean Journal of Construction Engineering and Management
• /
• v.21 no.6
• /
• pp.75-83
• /
• 2020

This study intends to explore the scope of the recognized equity capital of developer in real estate project finance loan screening. The factors which can be recognized as equity capital are categorized into 24 factors with 3 upper categories and 6 mid categories. In order to develop the importance weight of factors, AHP and Fuzzy methodologies are implemented based on survey analysis by experts in financial institutions. Research findings indicate that the land cost, evacuation cost, and real estate acquisition tax as land-related direct costs, and the design cost, traffic impact assessment cost, underground safety impact assessment cost, boundary surveying cost, and geological survey cost as the construction permit-related costs are higher than any others. On the other hand, the supplementary costs related to the operation of the developer show very low importance weight. Accordingly, the hierarchy of factors for equity capital should be clearly developed in order to minimize any dispute and prevent non-performing loans to real estate project finance.

• Journal of the Korean Geotechnical Society
• /
• v.30 no.10
• /
• pp.67-80
• /
• 2014

The thickness of permafrost in Eastern Siberia is from 200 to 500 meters. The seasonally frozen layer can vary from 0 to 4m depending on ground temperature and its location. The shear wave velocity varies from 80m/s in summer to 1500m/s in winter depending on soil type. When melted, large impedence will occur due to the difference between the shear wave velocity of seasonally frozen soil and that of permafrost layer. Large displacement may occur at the boundary of the melted and the frozen layer, and this phenomenon should be considered in a seismic design. In this research, one-dimensional equivalent linear analyses were performed to investigate the effects of the seasonally frozen layer on ground amplification characteristics. Soil profiles of Yakutsk and Chara in Eastern Siberia were selected from geotechnical reports. 20 recorded ground motions were used to evaluate the effect of input motions. As the thickness of seasonally frozen layer and the difference in the shear wave velocity increases, the amplification is shown to increase. Peat, very soft organic soil widely distributed throughout Eastern Siberia, is shown to cause significant ground motion amplification. It is therefore recommended to account for its influence on propagated motion.

• Parasites, Hosts and Diseases
• /
• v.32 no.1
• /
• pp.7-12
• /
• 1994

A calf and 50 mice were infected with Cryptosporidium parvum and their fecal materials were collected and treated 10 ether extraction (EE), followed by discontinuous sucrose gradients (DSG) method. EE method was to remove some of fat or lipid from feces. Sediments were washed by centrifugation ($1,500{\;}{\times}{\;}g$ for 10 min., 3 times) In phosphate-buffered saline and then these washed sediments were sleeved sequentially through stainless steel screens with a final mesh of 250 ($61{\;}{\mu\textrm{m}}$ porosity) to remove other debris. After sieving, the materials were suspended in 2.5% potassium dlchromate solution. Oocysts were counted by using a hemocytometer and the recovery rate of pure oocysts was calculated on the basis of the count. Following centrifugation ($1,500{\;}{\times}{\;}g$ for 30 min.) by DSG method, most oocysts were recovered at the interface between a gravity of 1.103 and 1.064. The recovery rates of pure oocysts from the fecal suspension of the calf ($3.8{\;}{\times}{\;}10^7/ml$) and the mouse ($3.2{\;}{\times}{\;}10^6/ml$) treated with EE method were 81.6% and 51.6%, respectively. It is suggested that the recovery rate was dependent on the number of oocysts In each suspension treated with EE method. To get the 50% recovery rate, there must be more than $2{\;}{\times}{\;}10^6$ oocysts per ml of the fecal suspension treated with EE method. By the combination of the two methods it was possible to isolate C. parvum oocysts from normal feces of the calf and mouse as well as from dlarrhelc feces.

• Geophysics and Geophysical Exploration
• /
• v.13 no.3
• /
• pp.256-267
• /
• 2010

Earthquakes in the Korean Peninsula occur along the faults formed and boundaries between major geological units ruptured due to violent tectonic activities during the Mesozoic. E-W and/or ENE-SSW compressive stress regime resulting from collisions between the Eurasian plate and neighbouring the Indian plate, the Pacific plate and the Philippine plate trigger Korean earthquakes of thrust faulting with predominant strike-slip components along the mostly NNE-SSW trending active faults. Seismicity of the Korean peninsula has been moderate to low during the past 20 centuries except for the period from the 15th to the 18th centuries of exceptionally high seismicity, showing the typical irregularity of intraplate seismicity. The structure of the Korean peninsula is rather homogeneous without the Conrad discontinuity sharply dividing the upper and lower crust. Lateral heterogeneities exist in the crust. The crust with an average thickness of about 33 km is thicker in the mountainous region than the plain due to the Airy-type isostatic equilibrium maintained in the peninsula. Crustal P-wave velocity with average of about 6.3 km/sec increases gradually from the near surface to the Moho. The upper mantle P-wave (Pn) velocity is about 7.8 km/sec.

• The Journal of the Petrological Society of Korea
• /
• v.18 no.2
• /
• pp.93-114
• /
• 2009

Lithological and petrochemical characteristics and tectonic setting of the Cretaceous volcanic rocks in Hampyeong area located in the southwestern part of Okchon Zone, were studied by field survey and petrochemistry of major, trace, and rare earth elements. The $SiO_2$contents of the volcanic rocks range from 50.8 to 77.2wt.%. With increasing $SiO_2$, $Al_2O_3$, $Fe_2O_3\;^T$, $TiO_2$, MnO, CaO and MgO contents decrease and $K_2O$content increase, but $Na_2O$content is scatter to the trend. According to TAS and AFM diagrams, the Cretaceous volcanic rocks are calc-alkaline series. On the discrimination diagram of $K_2O$versus $SiO_2$, the volcanic rocks belong to high-K rocks series. The trace element compositions and REE patterns of the volcanic rocks, characterized by a high LILE/HFSE ratio and enrichments in LREE, indicate that they are typical of continental margin arc calc-alkaline volcanic rocks associated with the subduction environment. The ratios of Ba/Ta and Ba/La indicate that they are associated with volcanic arc-related magmatism. The Cretaceous volcanic rocks in Hampyeong area might be located in the Eurasian continental margin, related to the Pacific type tectonic environment during the Cretaceous times.

• Journal of the Korean earth science society
• /
• v.21 no.3
• /
• pp.315-322
• /
• 2000

In this study, the data used for the models were a set of 56 geologic estimates of long-term fault slip rates. The hest models were those in which mantle drag was convergent on the Transverse Ranges in the San Andreas fault system, and faults had a low friction (${\mu}$= 0.3). It is clearly important to decide whether these cases of low strength are local anomalies or whether they are representative. Furthermore, it would be helpful to determine fault strength in as many tectonic settings as possible. Analysis of data was considered by unsuspected sources of pore pressure, or even to question the relevance of the friction law. To contribute to the solution of this problem, three attempts were tried to apply finite element method that would permit computational experiments with different hypothesized fault rheologies. The computed model has an assumed rheology and plate tectonic boundary conditions, and produces predictions of present surface velocity, strain rate, and stress. The results of model will be acceptably close to reality in its predictions of mean fault slip rates, stress directions and geodetic data. This study suggests some implications of the thermoelastic characteristics to interpret the relationship with very low strength of San Andreas fault system.

• 한국지구과학회:학술대회논문집
• /
• 2005.09a
• /
• pp.199-206
• /
• 2005

지구과학은 실생활과 직접적으로 관련되거나 학생들이 친숙하게 생각하는 많은 개념들을 포함하고 있으며 이런 특성은 과학캠프나 자연탐사 활동에서 지구과학과 관련한 탐구주제가 학생들의 큰 호응을 얻는 사실을 설명할 수 있다. 하지만 정규 수업에서 이루어지는 지구과학 실험 수업은 교과서에 제시된 자료해석 위주의 실험이 많아 학생들의 흥미를 반감시키는 경우가 많으며 자료 측정과정에서 과학자가 느낄 수 있는 중요하고 귀중한 경험을 놓칠수 있다. 그런데 인터넷에서는 해양과 대기, 천문, 지질 각 분야에서 지속적으로 갱신되는 실시간 관측 자료를 제공해 주는 곳이 많으며 이 실시간 자료들을 고등학교의 지구과학 실험에 이용할 수 있도록 학습 프로그램을 개발하면 기존의 자료해석 실험이 가지는 한계를 극복하고 학생들의 지구과학에 대한 호응도를 높일 수 있으며 보다 다양한 탐구 능력을 향상 시킬 수 있다. 이러한 학습 프로그램의 특징은 탐구 중심 혹은 문제 해결 학습을 강조하는 현재의 교육 목표를 잘 반영할 수 있다. 본 연구의 목적은 인터넷에서 제공되는 지구과학 관련 실시간 자료들을 활용할 수 있는 고등학교 지구과학 학습 프로그램을 개발하고 이를 지원할 수 있는 홈페이지를 구축한 후 실제로 수업에 적용하여 교육적 효과를 확인하는 것이다. 연구 결과 실시간 자료를 이용하는 고등학교 학생들을 위한 지구과학 학습 프로그램을 12개의 주제에 대해서 완성했다. 먼저 지구과학실험 시간에 적용할 수 있는 2차시 분량의 학습 프로그램 6주제를 개발했는데 개발 주제는 '지진이 일어나고 있는 곳은 어디인가?', '진앙으로 판의 경계를 결정하기', '진앙의 위치를 찾아라', '암영대를 찾아라', '태양의 자전 주기를 측정하기', '태양활동' 이다. 각 주제별로 수업소개, 학습목표, 과정, 학습자료(학생 활동지, 기타 자료, 수업 내용과 관련한 실시간 자료 제공 사이트 목록), 평가 자료를 만들었다. 학생들의 활동 내용은 <지진이 일어나고 있는 곳은 어디인가?>의 주제를 예로 들면 학생들이 실시간으로 전 세계의 지진활동을 모니터하는 사이트에 접속하여 최근에 지진이 어디에서 일어났는지 알아보고 지난 30일 동안에 일어났던 규모 4 이상의 지진 자료를 다운 받아 세계 지도에 점으로 표시한다. 이 때 학생들은 손으로 진앙의 위치를 지도에 그리는 대신 엑셀의 그래프 기능을 이용하여 지도에 진앙의 위치를 나타내게 한다. 또 개인 과제 연구에 적용할 수 있는 학습 프로그램을 5가지 개발하여 학생들이 특정한 주제에 대하여 탐구 과제를 수행할 수 있게 했는데 개발된 주제는 '태양 활동으로 오로라 예측하기', '국제 우주 정거장을 찾아내자', '한반도 부근의 해양 기상과 해수의 물리적 상호 관계', '일기도 분석을 통한 태풍의 진로 예측', '우리 나라 조석 예측' 이다. 마지막으로 사이버 학습을 통해서 수업 시간의 제약 없이 과제 형태로 처치 가능한 학습 프로그램 개발 했는데 그 주제는 '태풍이 저위도에서 북상하는 이유?'이다. 개발된 프로그램 중 2차시 학습 프로그램은 과학고 중학생 영재반에게, 개인 탐구 과제는 과학고 1학년 학생들에게, 사이버 수업 형태는 과학고 2학년 학생에게 적용시켰다. 실시간 자료 활용을 지원하는 홈페이지를 만들어 자료 제공 사이트에 대한 메타 자료를 데이터베이스화했으며 이를 통해 학생들이 원하는 실시간 자료를 검색하여 찾을 수 있고 홈페이지를 방분했을 때 이해하기 어려운 그래프나 각 홈페이지가 제공하는 자료들에 대한 처리 방법을 도움말로 제공받을 수 있게 했다. 실시간 자료들을 이용한 학습은 학생들의 학습 의욕과 탐구 능력을 향상시켰으며 컴퓨터 활용 능력과 외국어 자료 활용 능력을 향상 시키는데도 도움을 주었다.

• Geophysics and Geophysical Exploration
• /
• v.16 no.4
• /
• pp.211-216
• /
• 2013

In general, smoothing filters regularize functions by reducing differences between adjacent values. The smoothing filters, therefore, can regularize inverse solutions and produce more accurate subsurface structure when we apply it to full waveform inversion. If we apply a smoothing filter with a constant coefficient to subsurface image or velocity model, it will make layer interfaces and fault structures vague because it does not consider any information of geologic structures and variations of velocity. In this study, we develop a selective smoothing regularization technique, which adapts smoothing coefficients according to inversion iteration, to solve the weakness of smoothing regularization with a constant coefficient. First, we determine appropriate frequencies and analyze the corresponding wavenumber coverage. Then, we define effective maximum wavenumber as 99 percentile of wavenumber spectrum in order to choose smoothing coefficients which can effectively limit the wavenumber coverage. By adapting the chosen smoothing coefficients according to the iteration, we can implement multi-scale full waveform inversion while inverting multi-frequency components simultaneously. Through the successful inversion example on a salt model with high-contrast velocity structures, we can note that our method effectively regularizes the inverse solution. We also verify that our scheme is applicable to field data through the numerical example to the synthetic data containing random noise.