• Journal of the Earthquake Engineering Society of Korea
• /
• v.10 no.1 s.47
• /
• pp.33-39
• /
• 2006

Parameters including the seismic sources and the elastic wave propagation characteristics were analysed using the observed ground motions from 3 Kyoungju region earthquakes. The Levenberg-Marquardt algorithm was applied to invert all the variables non-linearly and simultaneously with S wave energy In frequency domain. Average stress drop of 3 events and local attenuation parameter ${\kappa}$ were estimated to about 48-bar and 0.0312 respectively. Regional attenuation parameter, Qo and ${\eta}$, were also estimated to be about 417 and 0.83. ${\kappa}$ values are much higher than that of EUS, even though smaller than that of WUS. All these values resultant from this study show that there are differences in some parameters of other studios due to differences in the governing equation. of acceleration motions

• 한국지구물리탐사학회:학술대회논문집
• /
• 2006.06a
• /
• pp.247-252
• /
• 2006

This study analysed the sensitivity of the attenuation functions for the seismic hazard estimation. For the seismic hazard estimation, this study used HAZUS software, which is developed originally by FEMA(USA). The scenario earthquake ($M_w=6.0$) is located the Hongsung area, where one of the recent macro earthquakes occurred in 1978. The area for seismic hazard estimation is assumed to be Boryung city in Choongnam-do. Three attenuation functions were applied for the sensitivity analysis. The results show that the attenuation functions have much influences on the seismic hazard on the various types of buildings. Therefore the attenuation function is very important factor for the seismic hazard estimation.

• 한국방재학회:학술대회논문집
• /
• 2008.02a
• /
• pp.249-252
• /
• 2008

The solutions are expressed in terms of a double integral transformation over wavenumber and frequency. The complete solution is considered in such a full wave theory approach. This method can handle a larger number of plane layers. Therefore, the result of FK method is very similar to real data. Using the models that were modified in velocity and Q value with depth by iterative process from a model (Kang and Park, 2006) and considered as one of the best models in Korean Peninsula, the synthetic data are simulated for explosions and earthquakes of North Korea. This study notes that the wave shape of the synthetic data is very dependent on Q value, velocities, and thickness of sedimentary layers. Comparing between the real and the synthetic, fitting well in arrival time of first arrival and wave shape causes us to arrive at an indication that the model is very close representation of upper crustal structure and simulations are well done in amplitude fitting and in identification of phases of local and regional waves.

• The Journal of Engineering Geology
• /
• v.6 no.3
• /
• pp.137-153
• /
• 1996

The purpose of this study is to investigate the possibilities of identifying and detecting underground cavities using seismic waves recorded by the fixed and mobile stations. During 18 months of field work we recorded chemical explosions near the Bongdarn station. Seismic Stations were installed on the free surface and underground inside the Samba mine. The seismograms at the fixed(lorg-term) seismic station show abrupt change of polarization characteristics which can he associated with the appearance of P-to-S converted phase(PS) at 150 ~ 200 msec after the first P arrival. This result indicates that converted phases are generated very near to the Bongdarn station at a depth of 190m. Shear-wave splitting phenomena have also been observeci The time delay between fast shear(fS) and slow shear(sS) waves ranges between 30 and 60 msec(average is 42 msec). However, exact time delay between the fast and the slow shear waves can not be accurately measured because of the very short time delay and limitation of sampling rate. Chemical explosion experiments were recorded at stations along various paths to contrast the seismic response of areas with and without cavities. The seismograms recorded at the stations installed at cavity areas show an abrupt change of polarization characteristics but not on the other stations. Seismic waves propagating through the cavity are characterized by the attenuation of high frequency waves and predominantly low frequency seismic waves after the S wave arrivals.

• 한국지구물리탐사학회:학술대회논문집
• /
• 2006.06a
• /
• pp.169-174
• /
• 2006

The Korean peninsula has been considered as seismically intermediate region, since seismic activities have been not severe for long time and the active tectonic boundary is also located far away. However, the activities of earthquakes have been increased for last decade. significantly. Since currently important structures and facilities are increasing rapidly in the Korean Peninsula, the importance of seismic design are increasing exponentially too. This study used observed ground motion of Fukuoka event including 11 afterschocks and then estimated seismic parameters representing seismic source, propagation effect, and site effects. The results were comparable to those of other studies. The results could be used seismic design of the important structures and facilities in Korean peninsula.

• 한국방재학회:학술대회논문집
• /
• 2007.02a
• /
• pp.137-139
• /
• 2007

To enhance capability on discerning local and regional seismic phases, such as, Pn, Pg, Sn, Rg, etc, within the crust, 2-D numerical forward modeling will be applied to the data obtained from local seismic stations by simulating almost all waves including not only body wave but also surface wave generated without having to explicitly include them under consideration of Q factor. In this study, after getting rid of instrumental response by deconvolution, pseudo-spectral method instead of relying on typical numerical methods, such as, FEM(Finite Element Method) and FDM(Finite Difference Method), will be implemented for 2-D numerical forward modeling by considering velocities of P-wave and S-wave, density, and Q factors. Ultimately, the Power of reaching the enhanced capability on discerning local and regional seismic phases will make it easier for us to identify the seismic source, whether it is originated from man-made explosion or pure earthquake.

• Journal of the Korean earth science society
• /
• v.28 no.6
• /
• pp.720-732
• /
• 2007

For the Seoul metropolitan area and the eastern Kyeongsang Basin, we simultaneously calculated $Q_P^{-1}$ and $Q_S^{-1}$ by applying the extended coda-normalization method for 98 seismograms of local Earthquakes. As frequency increases from 1.5 Hz to 24 Hz, the result decreased from $(4.0{\pm}9.2){\times}10^{-3}$ to $(4.1{\pm}4.2){\times}10^{-4}$ for $Q_P^{-1}$ and $(5.5{\pm}5.6){\times}10^{-3}$ to $(3.4{\pm}1.3){\times}10^{-4}$ for $Q_S^{-1}$ in Seoul Metropolitan Area. The result of eastern Kyeongsang basin also decreased from $(5.4{\pm}8.8){\times}10^{-3}$ to $(3.7{\pm}3.4){\times}10^{-4}$ for $Q_P^{-1}$ and $(5.7{\pm}4.2){\times}10^{-3}$ to $(3.5{\pm}1.6){\times}10^{-4}$ for $Q_S^{-1}$. If we fit a frequency-dependent power law to the data, the best fits of $Q_P^{-1}$ and $Q_S^{-1}$ are $0.005f^{-0.89}$ and $0.004f^{-0.88}$ in Seoul metropolitan Area, respectively. The value of $Q_P^{-1}$ and $Q_S^{-1}$ in the eastern Kyeongsang basin are $0.007f^{-1.02}$ and $0.006f^{-0.99}$, respectively. The $Q_S^{-1}$ value of the eastern Kyeongsang basin is almost similar to Seoul metropolitan area. But the $Q_P^{-1}$ value of the eastern Kyeongsang basin is a little higher than that of Seoul metropolitan area. This may be that the crustal characteristics of the eastern Kyeongsang basin is seismologically more heterogeneous. However, these $Q_P^{-1}$ values in Korea belong to the range of seismically stable regions all over the world.