• Geophysics and Geophysical Exploration
• /
• v.18 no.2
• /
• pp.85-90
• /
• 2015

Orientation corrections for Korean seismic stations were calculated by using ambient noise cross-correlation. This method uses Rayleigh waves extracted from ambient noise cross-correlation instead of teleseismic waveforms from earthquakes, which have been generally used for previous studies. The theoretical background of the method is that the phase of radial-vertical cross-correlation function should be the same as that of $90^{\circ}$ phase-shifted vertical-vertical cross-correlation function. The results calculated from stacked cross-correlograms from Jan. 2007 to Sep. 2008 are comparable to the previous results obtained from teleseismic waveforms. In addition, overall the standard deviations of orientation corrections are less than $5^{\circ}$. The temporal variation in orientation corrections calculated for every 30 days shows no significant change and also standard deviations of them are mostly less than $5^{\circ}$. This means that the orientations of stations used in this study have been kept constant during the period. The sensitivity test for stacking period of the ambient noise cross-correlation method shows that continuous ambient noise record of at least about 30 days is required for estimating reliable orientation corrections.

• Journal of the Korea Convergence Society
• /
• v.10 no.11
• /
• pp.303-308
• /
• 2019

This study suggests a method for deriving earthquake response based on log-normal distribution in order to obtain realistic and reliable probability and statistical seismic response of structures. The development of three earthquake suites were presented, with a brief description of 2%, 10%, and 50% in 50 years probability of exceedance according the USGS Los Angeles probabilistic seismic hazard maps. In order to analyze the basic dynamic behavior, a Single-Degree-of-Freedom (SDOF) structure was selected and the seismic response spectrum representing the response of each natural period was plotted. Overall, the mean response values presented through the log-normal distribution is lower than the standard normal distribution. Thus, it is considered that the former method can be provided as the effective cost on performance-based seismic design more than the latter one.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2021.06a
• /
• pp.216-216
• /
• 2021

해저지진, 해저붕괴 및 해저화산분출 등에 발생되는 지진해일은 파장이 수십에서 수백 km에 이르는 장파로서 에너지 손실없이 먼 거리를 전파할 수 있으며, 수심이 상대적으로 얕은 해안가에 도달하면 범람에 의해 인명 및 재산피해를 야기시킬 수 있다. 예를 들어, 2004년 12월 26일에 발생한 수마트라 지진해일은 약 30만명의 인명피해와 약 10조원의 재산피해를 가져왔으며, 2011년 3월 11일에 발생한 동일본 지진해일은 약 2만명의 인명피해와 약 330조의 재산피해를 유발시켰다. 더욱이, 지진해일에 의해 폭발한 후쿠시마 원자력발전소에서의 방사능 유출은 10년이 지난 현재도 생태계 교란, 방사능 피폭 등의 피해를 일으키고 있다. 우리나라도 1983년 5월 26일 발생한 동해 중부지진해일에 의해 삼척시 임원항 및 인근에서 인명피해(1명 사망, 2명 실종)와 약 2억원의 재산피해가 발생하였다. 최근, 4차 산업혁명으로서 빅데이터를 기반으로 한 다양한 인공지능기술이 개발되고 있으며, 많은 분야에서 이 기술을 적용하고자 노력하고 있다. 특히, 과학 및 공학분야에서도 이를 융합하는 연구 및 활용하는 사례가 증가하고 있다. 본 연구에서는 1983년 발생한 중부지진해일에 의해 인명 및 재산피해가 발생한 임원항을 대상으로 지진해일 수치모형실험을 수행하며, 수치모형실험 결과를 토대로 인공지능 모델 중 합성신경망 (Convolution Neural Network)을 활용하여 인공지능을 통한 지진해일 범람구역을 산정 및 평가하고자 한다.

• Geophysics and Geophysical Exploration
• /
• v.12 no.4
• /
• pp.316-327
• /
• 2009

A standard for national seismological observatory was proposed on 1999. Since then, Quanterra digitizer has been installed and is operating on almost all of seismic stations which belong to major seismic monitoring organizations. Quanterra digitizer produce and transmit real-time event packet and data packet. Characteristics of event packet and arrival time of each channel's data packet on data center were investigated. Packet selection criteria using signal to noise ratio (hereafter SNR) and signal period from real-time event packet based on 100 samples per second (hereafter sps) velocity data were developed. Estimation of epicenter using time information of the selected event packet were performed and tested. A series of experiment show that event packets were received approximately 3~4 second earlier than data packets and the number of event packet was only 0.3% compare to data packets. Just about 5% against all of event packets were selected as event packet were related P wave of real earthquake. Using the selected event packets we can estimate an epicenter with misfit less than 10 km within 20 sec for local earthquake over magnitude 2.5.

• Journal of the Earthquake Engineering Society of Korea
• /
• v.8 no.5 s.39
• /
• pp.35-43
• /
• 2004

Small-scale models have been frequently used for seismic performance tests because of limited testing facilities and economic reasons. However, there are not enough studies on similitude law for analogizing prototype structures accurately with small-scale models, although conventional similitude law based on geometry is not well consistent in the inelastic seismic behavior. When fabricating prototype and small-scale model of reinforced concrete structures by using the same material, added mass is demanded from a volumetric change and scale factor could be limited due to aggregate size. Therefore, it is desirable that different material is used for small-scale models. Thus, a modified similitude law could be derived depending on geometric scale factor, equivalent modulus ratio and ultimate strain ratio. In this study, compressive strength tests are conducted to analyze the equivalent modulus ratio of micro-concrete to normal-concrete. Then, equivalent modulus ratios are divided into multi-phase damage levels, which are basically dependent on ultimate strain level. Therefore, an algorithm adaptable to the pseudodynamic test, considering equivalent multi-phase similitude law based on seismic damage levels, is developed. Test specimens, consisted of prototype structures and 1/5 scaled models as a reinforced concrete column, were designed and fabricated based on the equivalent modulus ratios already defined. Finally quasistatic and pseudodynamic tests on the specimens are carried out using constant and variable modulus ratios, and correlation between prototype and small-scale model is investigated based on their test results. It is confirmed that the equivalent multi-phase similitude law proposed in this study could be suitable for seismic performance tests on small-scale models.

• Journal of the Computational Structural Engineering Institute of Korea
• /
• v.30 no.4
• /
• pp.319-327
• /
• 2017

In this study, characteristics of seismic behaviors of offshore wind turbine systems using concrete-suction-type supporting structures are investigated. Applying hydrodynamic pressure from the surrounding sea water and interaction forces from the underlying soil to the structural system which is composed of RNA, the tower, and the supporting structure, a governing equation of the system is derived and its earthquake responses are obtained. It can be observed from the analysis results that the responses are significantly influenced by soil-structure interaction because dynamic responses for higher natural vibration modes are increased due to the flexibility of soil. Therefore, the soil-structure interaction must be taken into consideration for accurate assessment of dynamic behaviors of offshore wind turbine systems using concrete-suction-type supporting structures.

• The Journal of Engineering Geology
• /
• v.10 no.2
• /
• pp.79-97
• /
• 2000

Trend of earthquake occurrence of Korea represents that the term from 1978 to 1982 may be called as "active period", the term from 1983 to 1991 is rather tranquil, and from 1992, the occurrence number is increasing greatly. Instrumental earthquake observation of Korea started in 1905 by Japan. It continued until 1943 and ceased then through social disorders such as the independence from Japan Empire and the civil war. After that the observation restarted in 1963 by the establishment the World Wide Standard Seismograph Network. And the fundamental earthquake observation period started in 1978 with the Hongsung earthquake event. KMA(Korea Meteorological Administration) has constructed and operated the 24-hour earthquake and tsunami monitoring system and it propels new construction project of the national seismographic network system. In the result of this project, KMA operates 27 seismic networks, 42 accelerator networks, seismic analyzing system, and sea level monitoring system now. It has the plan to enlarge these systems that 31 seismic networks and 75 accelerator networks until 2001.

• Journal of the Computational Structural Engineering Institute of Korea
• /
• v.13 no.2
• /
• pp.231-244
• /
• 2000

This paper presents a dynamic analysis technique for a 2-D soil-structure interaction problem in the frequency domain, which can directly be applied as an analysis tool for seismic response analyses of underground structures, tunnels, embankments, and so on. In this method, the structure and near-field soil is modeled by the standard finite elements, while the unbounded far-field soil is represented using the dynamic infinite elements in the frequency domain. The earthquake-input motion is regarded as traveling P and SV waves which are incident vertically from the far-field of underlying half-space to the near-field of layered medium. The equivalent earthquake forces are then calculated utilizing so-called fixed-exterior-boundary-method and the free-field responses including displacements and tractions. For the verification of the present study, seismic response analyses are carried out for a multi-layered half-space free-field soil medium and a cylindrical cavity embedded in a homogeneous half-space. Comparisons of the present results with solutions by other approaches indicate that the proposed methodology gives accurate estimates. Finally, an application example of seismic response analysis for a subway station is presented, which demonstrates the applicability of the present study.

• The Journal of Engineering Geology
• /
• v.8 no.2
• /
• pp.99-114
• /
• 1998

The Yangsan fault system of Kyungsang Basin in the southeastern part of Korean peninsula is one of the most important structures in the peninsula. A number of strong earthquakes occurred in the vicinity of the fault. It was suggested that this fault can be divided into three segments: northern, central and southern ones. Earthquake data around the Yangsan fault were classified into two groups as incomplete and complete ones; the former is the data before the Choseon Dynasty and the latter is those since the dynasty. The maximum likelihood method was applied to compute seismicity parameters such as earthquake occurrence rates, b-values of frequency-magnitude relation and maximum possible magnitudes for each segment and the entire fault. These parameters show considerably different values from segment to segment. The b-value for the entire fault turned out to be 0.85 and maximum possible magnitudes for the northern, central and southern segments are 5.2, 6.8 and 6.0, respectively. The mean return periods for the maximum possible magnitudes for each segments are greater than 1000 years. In addition, according to the analysis of the frequency-magnitude relation, the occurrence pattern of earthquakes around the Yangsan fault show more similarity to the characteristic earthquake model than the Gutenberg-Richter model. The data for each segments are, however, too scarce to obtain any physically meaningful results.

• Journal of the Earthquake Engineering Society of Korea
• /
• v.7 no.6
• /
• pp.71-80
• /
• 2003

Though a nonlinear time history analysis may be provided to estimate more exactly the seismic performance of building structure, approximation methods are still needed in the aspect of practicality and simplicity, In converting a multi-story structure to an equivalent SDOF system, the mode vectors of the multi-story structure are assumed as the mode shape in elastic state regardless of elastic or elastic-plastic state. However, the characteristics of displacement mode are also changed after the yielding made in the structural elements, because the structure becomes inelastic in each incremental load step. In this research, a method of converting MDOF system to ESDOF system is presented by using nonlinear displacement mode considering the mode change of structures after the yielding. Also, the accuracy and efficiency of the method of the nonlinear displacement mode method of the estimate of seismic response of Mixed Building Structures were examined by comparing the displacements of the roof level of the multi-story building structures estimated from this converted displacement response of ESDOF with the displacement of the roof level through the nonlinear dynamic analysis of the multi-story building structures subjected to an actual earthquake excitation.