• Journal of Conservation Science
• /
• v.34 no.5
• /
• pp.333-343
• /
• 2018

This study was conducted to evaluate the conservation environment by monitoring temperature and humidity for two years and mapping the remaining pigments of mural paintings to diagnose the conservation state of mural paintings of Royal Tombs in Neungsan-ri. We evaluated the characteristics of condensation in the tomb. Compared with the results of a 2008 survey, we conducted state change of mural paintings in the tomb. The temperature in the main room, which has an annual average soil temperature distribution at 5 m depth in Korea, is maintained at $13{\sim}18^{\circ}C$. The temperature range of the main room was between less than $0.1^{\circ}C$ to $0.5^{\circ}C$, and the diurnal variation of temperature between summer (June to September) and winter (December to January) is the greatest. Condensation is more concentrated in the summer because the outdoor air was typically at higher temperatures than the main room inflows in the tomb. Mapping the remaining pigment composition and particle distribution of mural paintings showed that it was in the range of 36.72~39.53% of the wall area. The pigment range was confirmed to be the same as it was in 2008, through ultraviolet fluorescence reaction and infrared ray investigation. Therefore, the underground environment that receives dew condensation in the summer has been stable since 2008. However, continuous monitoring is needed because the deterioration of mural painting proceeds considerably after excavation and only a small percentage of the pigments survive.

• Korean Journal of Heritage: History & Science
• /
• v.55 no.4
• /
• pp.296-312
• /
• 2022

This paper examines the concept and process of heritagization, as well as other measures for the value enhancement of food culture as heritage, through the case of the gastronomic meal of the French, which has a long history as a socially constructed heritage. Heritage refers to what a society perceives as worthy of being transmitted. Thus, a heritage is something that a society or group chooses to preserve and that represents its identity. In the 19th century, France began to designate and protect heritage through a policy of preserving historical monuments, and heritage became both a social construct and creation with the purpose of preserving and enhancing values. Interest in heritage spread around the world with globalization, and has grown even greater since the 1972 UNESCO Convention. This interest has progressively extended to nature, urban landscapes and intangible cultural heritage. In 2003, the UNESCO Convention for the Protection of the Intangible Cultural Heritage was adopted, and this has strengthened the interest in intangible cultural heritage worldwide. Food-related heritage has been excluded from the list due to difficulties in establishing inscription criteria and concerns about the potential commercialization of heritage. However, in 2010, the food cultures of the Mediterranean, Mexico, and France were inscribed on UNESCO's Representative List of the Intangible Cultural Heritage of Humanity, which prompted interest in food culture and efforts to inscribe the food heritage of a number of other countries, including Korea. France has a long history of interest in gastronomy as a cultural heritage and part of its national identity. Efforts to preserve and popularize gastronomy as a part of the national identity and heritage have been made at both the private level, by gourmets and associations, and at the governmental level. Through these efforts, the culture of gastronomy as a heritage has been firmly established through theoretical discussion, listing of food-related heritages, and policies. Sustainable development of the heritage is pursued through certain ongoing institutional approaches, including the City of Gastronomy network, the National Food Program, and the promotion and labeling of the Year of the French Gourmet.

• Proceedings of the Korean Society of Crop Science Conference
• /
• 2023.04a
• /
• pp.7-7
• /
• 2023

Currently, the main technologies of various fourth industries are big data, the Internet of Things, artificial intelligence, blockchain, mixed reality (MR), and drones. In particular, "digital twin," which has recently become a global technological trend, is a concept of a virtual model that is expressed equally in physical objects and computers. By creating and simulating a Digital twin of software-virtualized assets instead of real physical assets, accurate information about the characteristics of real farming (current state, agricultural productivity, agricultural work scenarios, etc.) can be obtained. This study aims to streamline agricultural work through automatic water management, remote growth forecasting, drone control, and pest forecasting through the operation of an integrated control system by constructing digital twin data on the main production area of the nojinot industry and designing and building a smart farm complex. In addition, it aims to distribute digital environmental control agriculture in Korea that can reduce labor and improve crop productivity by minimizing environmental load through the use of appropriate amounts of fertilizers and pesticides through big data analysis. These open-field agricultural technologies can reduce labor through digital farming and cultivation management, optimize water use and prevent soil pollution in preparation for climate change, and quantitative growth management of open-field crops by securing digital data for the national cultivation environment. It is also a way to directly implement carbon-neutral RED++ activities by improving agricultural productivity. The analysis and prediction of growth status through the acquisition of the acquired high-precision and high-definition image-based crop growth data are very effective in digital farming work management. The Southern Crop Department of the National Institute of Food Science conducted research and development on various types of open-field agricultural smart farms such as underground point and underground drainage. In particular, from this year, commercialization is underway in earnest through the establishment of smart farm facilities and technology distribution for agricultural technology complexes across the country. In this study, we would like to describe the case of establishing the agricultural field that combines digital twin technology and open-field agricultural smart farm technology and future utilization plans.

• 한국데이터정보과학회:학술대회논문집
• /
• 2002.06a
• /
• pp.5-8
• /
• 2002

현재 우리 나라가 사용하고 있는 표준시는 I-시간이다. 이 표준시 사용에 대해 일부 이견이 있어, 우리 나라의 표준시 제도를 확립하기 위해 세계 각국의 표준시의 운용 상황을 분석 검토함으로서 우리나라는 현재 사용 중인 I-시간을 계속적으로 사용하는 것이 타당한 것으로 다음과 같은 결론을 얻을 수 있었다. 1) 세계에서 복수 표준시를 운용하고 있는 나라(러시아 등 9개국)는, 표준시 적용 지역을 태양시에 정확하게 맞추어 결정할 수 있을 것임에도, 3개국만 표준시가 태양시에 거의 일치할 뿐 나머지 6개국은 모두 태양시보다 표준시를 앞세워 적용하고 있다. 2) 세계 15대 대 영토국 중 단일표준시를 운용하고 있는 나라(중국 등 6개국) 중에서 3개국이 대체로 표준시가 태양시에 일치할 뿐이고, 나머지 3개국은 표준시를 태양시보다 $1{\sim}2$시간 이상이나 앞세워 적용하고 있다. 3) 전 세계의 145개 주요 단일 표준시 사용국 중 약 5%(중동의 지중해 연안국들과 동유럽의 일부 국가들) 정도에서 표준시를 태양시보다 30분 정도 늦춰 적용할 뿐이고, 태양시와 비슷하게 운용하는 나라는 약 56%, 표준시를 30분 이상 앞세워 적용하고 있는 나라는 약 39% 정도로서 대체로 태양시보다 빠른 표준시를 긍정적으로 받아들이고 있다. 4) 캐나다와 미국의 경우는 각 주에서 정한 표준시와는 다르게 운영하고 있는 지방들이 있는데, 이들 모두가 지리적인 위치로 보아 태양시보다 표준시가 어느 정도 빠르게 운영되도록 조정한 경우들이다. 5) 세계에서 UTC와 비 정수 시간차의 표준시를 운용하는 지역과 국가는 7개소 정도이다. 이들 중 표준시를 태양시에 맞추어 설정한 경우가 6개소이고, 지리적인 위치로 보아 표준시와 태양시가 일치할 수 있는데도 표준시를 30분 정도를 빠르게 운용하기 위해 조정한 경우가 1개소이다. 6) 세계에서 서머타임을 적용하고 있는 최저위도 국가는 북반구에서는 북회귀선에 걸쳐 있는 Mexico와 Cuba, 남반구에서는 Brazil의 남회귀선에 걸쳐 있는 남반부인데 이들은 모두 태양시와 일치하는 표준시를 운용하는 나라들이다. 한편 서머타임을 적용하고 있지 않는 최고위도 국가는 북반구에서는 Iceland, 남반구에서는 Argentina인데, 이 두 나라는 모두 이미 표준시를 태양시보다 1시간 이상 빠르게 적용하고 있는 나라들이다. 7) 복수 표준시간을 운용하고 있는 Canada와 미국에서는 국가적으로는 서머타임을 운용하고 있는데도 서머타임을 운용하고 있지 않는 주가 Canada에는 1개주, 미국에는 3개 주가 있는데, 이들은 모두 표준시가 태양시보다 30분${\sim}$1시간 정도 빠르게 적용되고 있는 곳이다. 8) 세계의 많은 나라가 표준시를 태양시보다 30분${\sim}$1시간 또는 그 이상까지도 빠르게 적용하고 있다는 사실, 그리고 세계의 많은 나라에서 서머타임을 시행하고 있다는 사실을 보면 태양시보다 표준시를 어느 정도 빠르게 적용해 생활하는 것은 인간 생체리듬에 악영향을 미치지 않으면서 오히려 시간 이용을 효율화하는 장점이 있는 것으로 판단된다. 9) 현재 우리나라는 경도 $135^{\circ}E$를 기준으로 하는 I-시간을 사용하고 있으면서 I-시간대역의 서쪽경계에 위치하여 태양시보다 표준시가 30분 정도 빠르다. 이는 한국인의 생체리듬에 결코 나쁜 영향을 주지 않으며, 오히려 시간을 효율적으로 사용할 수 있는 장점으로 작용하고 있는 것으로 판단된다. 아울러 여름철에 일광절약시간(서머타임)제의 필요성을 완화시켜줌으로서 표준시를 안정적으로 운용하는데 크게 기여하고 있다. 이는 표준시를 UTC와 정수시간차를 유지하면서 안정적으로 운영하려는 세계 각국의 표준시 운영 경향과도 일치하고 있다. 10) 우리나라가 사용하는 I-시간이 우리에게 이상과 같은 장점을 가지고 있음에도 불구하고 이 I-시간이 일제의 잔재라거나 또한 한국인의 생체리듬에 해롭다는 이유를 들어 우리 나라의 표준시를 경도 $127.5^{\circ}W$ 기준의 H'시간으로 변경시킨다면UTC와의 8시간 30분차 시간을 운영하게 됨으로서 국제화 시대를 사는데 큰 불편을 초래할 뿐만 아니라, 추가적으로 서머타임제를 도입하게 되는 등 커다란 부작용을 겪게 될 것이다.

• Journal of Soil and Groundwater Environment
• /
• v.10 no.2
• /
• pp.35-43
• /
• 2005

Bioslurping combines the three remedial approaches of bioventing, vacuum-enhanced free-product recovery, and soil vapor extraction. Bioslurping is less effective in tight (low-permeability) soils. The greatest limitation to air permeability is excessive soil moisture. Optimum soil moisture is very soil-specific. Too much moisture can reduce air permeability of the soil and decrease its oxygen transfer capability. Too little moisture will inhibit microbial activity. So Modified Fenton reaction as chemical treatment which can overcome the weakness of Bioslurping was experimented for simultaneous treatment. Although the diesel removal efficiency of SVE process increased in proportion to applied vacuum pressure, SVE process was difficulty to remediation quickly semi- or non-volatile compounds absorbed soil strongly. And SVE process had variation of efficiency with distance from the extraction well and depth a air flow form of hemisphere centering around the well. Below 0.1 % hydrogen peroxide shows the potential of using hydrogen peroxide as oxygen source but the co-oxidation of chemical and biological treatment was impossible because of the low efficiency of Modified Fenton reaction at 0.1 % (wt) hydrogen peroxide. NTA was more efficiency than EDTA as chelating agent and diesel removal efficiency of Modified Fenton reaction increased in proportion to hydrogen peroxide concentration. Hexadecane as typical aliphatic compound was removed less than Toluene as aromatic compound because of its structural stability in Modified Fenton reaction. What minimum 10% hydrogen peroxide concentration has good remediation efficiency of diesel contaminated groundwater may show the potential use of Modified Fenton reaction after bioslurping treatment.

• The Journal of Engineering Geology
• /
• v.33 no.2
• /
• pp.275-291
• /
• 2023

Global warming has made the polar regions more accessible, leading to increased demand for the construction of new resource-development plants in oil-rich permafrost regions. The selection of locations of resource-development plants in permafrost regions should consider the surface displacement resulting from thawing and freezing of the active layer of permafrost. However, few studies have considered surface displacement in the selection of optimal locations of resource-development plants in permafrost region. In this study, Analytic Hierarchy Process (AHP) analysis using a range of geospatial information variables was performed to select optimal locations for the construction of oil-sands development plants in the permafrost region of southern Athabasca, Alberta, Canada, including consideration of surface displacement. The surface displacement velocity was estimated by applying the Small BAseline Subset Interferometric Synthetic Aperture Radar technique to time-series Advanced Land Observing Satellite Phased Array L-band Synthetic Aperture Radar images acquired from February 2007 to March 2011. ERA5 reanalysis data were used to generate geospatial data for air temperature, surface temperature, and soil temperature averaged for the period 2000~2010. Geospatial data for roads and railways provided by Statistics Canada and land cover maps distributed by the North American Commission for Environmental Cooperation were also used in the AHP analysis. The suitability of sites analyzed using land cover, surface displacement, and road accessibility as the three most important geospatial factors was validated using the locations of oil-sand plants built since 2010. The sensitivity of surface displacement to the determination of location suitability was found to be very high. We confirm that surface displacement should be considered in the selection of optimal locations for the construction of new resource-development plants in permafrost regions.

• Economic and Environmental Geology
• /
• v.51 no.2
• /
• pp.185-201
• /
• 2018

Nuclear power plants(NPP) are constructed and operated to ensure safety against natural disasters and man-made disasters in all processes including site selection, site survey, design, construction, and operation. This paper will introduce a series of efforts conducted in Korea Hydro and Nuclear Power Co. Ltd., to assure the safety of nuclear power plant against earthquakes and other natural hazards. In particular, the present status of the earthquake, fault, and slope safety monitoring system for nuclear power plants is introduced. A earthquake observatory network for the NPP sites has been built up for nuclear safety and providing adequate seismic design standards for NPP sites by monitoring seismicity in and around NPPs since 1999. The Eupcheon Fault Monitoring System, composed of a strainmeter, seismometer, creepmeter, Global Positioning System, and groundwater meter, was installed to assess the safety of the Wolsung Nuclear Power Plant against earthquakes by monitoring the short- and long-term behavioral characteristics of the Eupcheon fault. Through the analysis of measured data, it was verified that the Eupcheon fault is a relatively stable fault that is not affected by earthquakes occurring around the southeastern part of the Korean peninsula. In addition, it was confirmed that the fault monitoring system could be very useful for seismic safety analysis and earthquake prediction study on the fault. K-SLOPE System for systematic slope monitoring was successfully developed for monitoring of the slope at nuclear power plants. Several kinds of monitoring devices including an inclinometer, tiltmeter, tension-wire, and precipitation gauge were installed on the NPP slope. A macro deformation analysis using terrestrial LiDAR (Light Detection And Ranging) was performed for overall slope deformation evaluation.

• Journal of Korean Tunnelling and Underground Space Association
• /
• v.20 no.3
• /
• pp.543-560
• /
• 2018

With the increased development in downtown underground space facilities that vertically cross under a railway at a shallow depth, the demand for non-open cut method is increasing. However, most construction sites still adopt the pipe roof method, where medium and large diameter steel pipes are pressed in to form a roof, enabling excavation of the inside space. Among the many factors that influence the loosening region and loads that occur while pressing in steel pipes, the size of the pipe has the largest impact, and this factor may correspond to the magnitude of load applied to the underground structure inside the steel pipe roof. The super equilibrium method (SEM) has been developed to minimize ground disturbance and loosening load, and uses small diameter pipes of approximately 114 mm instead of conventional medium and large diameter pipes. This small diameter steel pipe is called an SEM pile. After SEM piles are pressed in and the grouting reinforcement is constructed, a crossing structure is pressed in by using a hydraulic jack without ground subsidence or heaving. The SEM pile, which plays the role of timbering, is a fore-poling pile of approximately 5 m length that prevents ground collapse and supports surface load during excavation of toe part. The loosening region should be adequately calculated to estimate the spacing and construction length of the piles and stiffness of members. In this paper, we conducted a comparative analysis of calculations of loosening load that occurs during the press-in of SEM pile to obtain an optimal design of SEM. We analyzed the influence of factors in main theoretical and empirical formulas applied for calculating loosening regions, and carried out FEM analysis to see an appropriate loosening load to the SEM pile. In order to estimate the soil loosening caused by actual SEM-pile indentation and excavation, a steel pipe indentation reduction model test was conducted. Soil subsidence and soil loosening were investigated quantitatively according to soil/steel pipe (H/D).

• Journal of the Korean Society for Marine Environment & Energy
• /
• v.15 no.3
• /
• pp.263-272
• /
• 2012

Carbon dioxide, emitted by human activities since the industrial revolution, is regarded as a major contributor of global warming. There are many efforts to mitigate climate change, and carbon dioxide capture and geological storage (CCS) is recognized as one of key technologies because it can reduce carbon dioxide emissions from large point sources such as a power station or other industrial installation. The inclusion of CCS as clean development mechanism (CDM) project activities has been considered at UNFCCC as financial incentive mechanisms for those developing countries that may wish to deploy the CCS. Although the Conference of the Parties serving as the Meeting of the Parties to the UNFCCC's Kyoto Protocol (CMP), at Cancun in December 2010, decided that CCS is eligible as CDM project activities, the issues identified in decision 2/CMP.5 should be addressed and resolved in a satisfactory manner. Major issues regarding modalities and procedure are 1) Site selection, 2) Monitoring, 3) Modeling, 4) Boundaries, 5) Seepage Measuring and Accounting, 6) Trans-Boundary Effects, 7) Accounting of Associated Project Emissions (Leakage), 8) Risk and Safety Assessment, and 9) Liability Under the CDM Scheme. The CMP, by its decision 7/CMP.6, invited Parties to submit their views to the secretariat of Subsidiary Body for Scientific and Technological Advice (SBSTA), SBSTA prepared a draft modalities and procedure by exchanging views of Parties through workshop held in Abu Dhabi, UAE (September 2011). The 7th CMP (Durban, December 2011) finally adopted the modalities and procedures for CCS as CDM project activities (CMP[2011], Decision-/CMP.7). The inclusion of CCS as CDM project activities means that CCS is officially accredited as one of $CO_2$ reducing technologies in global carbon market. Consequently, it will affect relevant technologies and industry as well as law and policy in Korea and aboard countries. This paper presents a progress made on discussion and challenges regarding the issue, and aims to suggest some considerations to policy makers in Korea in order to demonstrate and deploy the CCS project in the near future. According to the adopted modalities and procedures for CCS as CDM project activities, it is possible to implement relevant CCS projects in Non-Annex I countries, including Korea, as long as legal and regulatory frameworks are established. Though Korea enacted 'Framework Act on Low Carbon, Green Growth', the details are too inadequate to content the requirements of modalities and procedures for CCS as CDM project. Therefore, it is required not only to amend the existing laws related with capture, transport, and storage of $CO_2$ for paving the way of an prompt deployment of CCS CDM activities in Korea as a short-term approach, but also to establish the united framework as a long-term approach.

• Journal of Korea Port Economic Association
• /
• v.22 no.4
• /
• pp.1-17
• /
• 2006

In the Bill of Lading of The Irbenskiy Proliv is not subject to the Hague-Visby Rules in accordance with paragraphs (A) and/or (E) of cl.1 or to the Hague Rules in accordance with paragraphs (B) and/or (D) of cl.1. The Irbenskiy Proliv is very rare case that is effective to exempt the carrier as literal words of Bill of Lading. The action concerns cargoes of perishable goods shipped from Brazil to Japan, under Bills of Lading each of which contained an extensive carrier's exemption clause. A preliminary issue was ordered to be determined on the question whether c1.4 is effective to exempt the ralliers from any potential liability for the claims in this case. The court held that there is no reason to reject c1.4 as part of each of the contracts contained in or evidenced by the bills of lading; and it protects the carrier where damage to the goods shipped results from such causes. It is therefore effective to exempt the carriers from any potential liability for those claims.