• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2004.05a
• /
• pp.320-320
• /
• 2004

반도체용 노광장비나 검사장비, 초정밀 광학렌즈, 비구면 렌즈 가공 등의 핵심이 되는 것은 초정밀결정기술이다. 서브미크론의 정밀도를 갖는 장비는 한치의 오차도 허용치 야고 계획된 경로대로 정확하게 목표지점에 도달해야 초정밀 가공을 기대 할 수 있다 초정밀 공기정압 스테이지는 저마찰 특성과 높은 운동정밀도, 청정환경유지가 가능하여 반도체 노광장비에서 PDP 나 LCD검사장비, 초정밀가공 가공기 등 다양한 정밀장비에서 활용된다.(중략)

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2004.05a
• /
• pp.97-97
• /
• 2004

본 연구에서 대상으로 하는 회전형 세정수 제어시스템은 비데용으로 사용되는 것으로, 크게 스테핑 모터부와 스테핑 모터에 의해서 구동되는 회전형 셀렉터부로 나눌 수 있으며, 셀렉터부는 비데, 일반세정, 국부세정, 건조의 4가지의 기능을 수행하는 구조로 되어있다. Fig. 1에 보이는 구조에서 상부셀렉터(upper selector)는 하부셀렉터(base selector)와 내부 자석사이에 위치해 있으며, 스테핑 모터의 초기 설정된 입력펄수 수에 비례하여 회전운동을 하고 해당 분사지점에 위치하게 된다.(중략)

• Proceedings of the Korean Society of Propulsion Engineers Conference
• /
• 2008.05a
• /
• pp.281-284
• /
• 2008

The flow of combustor in scramjet engine is supersonic speed. So residence time and mixing ratio are very important factors for efficient combustion. This study used open cavity on fuel/air mixing model and laser schlieren was carried out to investigate flow characteristics around a jet orifice and a cavity. A source of illumination has 10 ns endurance time so it can observe unsteady flow characteristics efficiently. Pressure was measured by varying momentum flux ratio. And the change of critical ignition point was observed to change of momentum flux ratio.

• Journal of the Korean Society of Propulsion Engineers
• /
• v.13 no.4
• /
• pp.9-15
• /
• 2009

The flow of combustor in scramjet engine has supersonic speed so that the residence time and mixing ratio are very important factors for the efficient combustion. This study used open cavity(L/D=4.8) as a fuel/air mixing model. Laser schlieren visualization and pressure measurement were carried out to observe the flow characteristics around a jet orifice and a cavity at the time of fuel injection. As a result of 10ns laser schlieren, unsteady flow which was around the cavity could be observed effectively. Pressure was measured that momentum flux ratio(J) was changed. And the change of critical ignition point could be observed by the momentum flux ratio changed.

• The Korean Journal of Applied Statistics
• /
• v.31 no.3
• /
• pp.353-366
• /
• 2018

This study uses mixed-effects models to predict thigh soft tissue artefact (STA), relative movement of soft tissue such as skin to femur occurring during hip joint motions. The random effects in the model were defined as STA and the fixed effects in the model were considered as skeletal motion. Five male subjects without musculoskeletal disease were selected to perform various hip joint rotational motions. Linear mixed-effects models were applied to markers' position vectors acquired from non-invasive method, photogrammetry. Predicted random effects showed similar patterns of STA among subjects. Large magnitudes of STA appeared on the points near the hip joint regardless of sides; however, small values appeared on the distal anterior.

• Korean Journal of Applied Biomechanics
• /
• v.19 no.3
• /
• pp.425-433
• /
• 2009

The purpose of this study was to investigate relation between fastball motion and longtoss motion, and the kinematical analysis using APAS(Ariel Performance Analysis System). Eight people(age: $21.2{\pm}3.6years$, height: $177.1{\pm}3.1cm$, weight $68.6{\pm}2.5kg$) participated in the experiment. Followings are the conclusion. In displacement of fore-aft on COG(Center of Gravity), fastball motion moved more forward than longtoss motion. In displacement of vertical on COG(Center of Gravity), fastball motion was lower than longtoss motion In velocity of right hand, greater release velocity was measured for fastball motion than for longtoss motion. In displacement of elbow and shoulder joint, more extended displacement was exhibited in fastball motion than longtoss motion. In displacement of trunk tilt, fastball motion showed foreward tilt, longtoss motion showed backward tilt. In stride, fastball showed longer than longtoss.

• The Journal of the Convergence on Culture Technology
• /
• v.10 no.5
• /
• pp.373-379
• /
• 2024

Mao Ze Dong's argument, which was examined through "Ti-Yuzhi Yan-Jiu," was not bound by Chinese traditions in the past, and it is a very bold and novel writing that points out exactly why physical education is necessary and why intellectuals of the time do not exercise. In addition, so that the first half's description does not stay only in empty theories, the second half introduces "Six-stage Gymnastics," which he created himself, and suggests specific action methods. Mao Ze Dong's idea of sports in "Ti-Yuzhi Yan-Jiu" is not just about promoting health, but is in line with the 5.4 New Culture Movement and is linked to the idea of saving the country for the nation and its people based on a strong body. I believe that 'Tiyuzh Yanjiu" initially stemmed from a simple sports enthusiast's ideology emphasizing Mao Zedong's physical training methods and their necessity. However, over time, the expression and practice of this argument became the foundation for the socialist political ideology of Mao Zedong, who united the people of China under socialism, founded the People's Republic of China, and led the entire country for nearly thirty years with his practical approach to physical training.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2023.05a
• /
• pp.313-313
• /
• 2023

이 연구에서는 침수식생 조건에서 식생 형태 별 frontal area, solid volume fraction이 유속 분포에 미치는 영향을 분석하고, 흐름측정결과로부터 식생 형태에 따른 난류흐름특성을 분석하기 위하여 수행 되었다. 식생흐름 구현을 위하여 5 cm의 간격으로 총 257개의 모형식생을 전체 영역에 배치했다. 유속측정위치는 수위측정결과에 따라 흐름이 안정화되는 구간에서 연직방향으로 17개 지점에서 측정한 후 앙상블 평균하여 분석했다. Branch의 유무에 따라 Type I과 II로 구분하여 각 식생에 대해 유속의 연직분포를 측정한 결과, Branch가 없는 Type I에서는 유속이 지속적으로 감소하는 반면, Type 2에서는 Frontal area가 급격히 증가하는 Branch 구간에서 유속이 급격히 감소한 후 Trunk 구간에서 유속이 다시 증가하는 변화를 보였다. Velocity Spectrum 분석 결과, 모든 지점에 대해 평균한 결과 고주파수 영역에서 -5/3 law를 따르는 것으로 나타나 전체 영역에서 isotropic & homogeneous 난류흐름이 발생함을 확인했다. 난류흐름특성 계산결과, Turbulent kinetic energy(k)를 mean kinetic energy(K)로 무차원화하여 연직분포를 비교했을 때 -k/K는 모두 식생에 근접하며 증가했다. Shear production(P_s)의 계산결과로부터 전단흐름에 의한 난류운동에너지 생성영향분석결과, Type I과 II가 식생경계의 mixing interface 부근에서 급격히 증가하는 분포를 보였으며, 이는 시간평균유속분포에서 분석한 결과와 일치한다. Wake production(P_w)의 연직분포계산결과, P_s와 유사하게 식생경계 부근에서 상승하는 결과가 나타났으며, 이는 식생경계에서 발생하는 Large scale eddy로 인해 발생함을 알 수 있다. 마지막으로 x-방향 난류확산계수로부터 scale factor(α_x)의 연직분포를 계산한 결과, 식생경계부근의 mixing interface에서 증가한 후 식생영역 내에서 감소하는 분포를 나타냈다. z-방향 난류확산 계수의 scale factor(α_z)는 α_x에 비해 작게 계산되었다. 이러한 결과는 오염물질의 연직확산이 식생경계에서 증가한 후 식생 내부에서 감소하여 오염물질, 부유사 등의 축적이 이뤄질 것으로 예상된다. 이는 가지로 인해 식생저항이 증가할 경우 용존성 물질의 혼합이 감소하여 식생의 저장대 효과가 증가함을 의미한다.

• Korean Journal of Applied Biomechanics
• /
• v.19 no.4
• /
• pp.779-791
• /
• 2009

The purpose of this study is to develop a program that computes the position of the instantaneous center of rotation while an object moves in a circular motion. For this study, a mathematical algorithm was developed and implemented on the experimental data. Data for pitching (40m carry) and putting (4m) strokes were obtained from a skilled female golfer. A computer program (Centering 1.0) calculated the experimental data and found the radius of the instantaneous center of rotation. When the data were taken broadly, the program produced an error distance of radius. When the data were divided gradually, the program produced a very close instantaneous center of rotation. On comparing pitching and putting strokes, putting was found to have a greater radius than pitching. The instantaneous centers of rotation of putting were not in the golfer's body rather, they were 3m away from the club head. The Centering 1.0 program can calculate the instantaneous center of rotation with at least three sets of experimental data.

• Journal of Dental Rehabilitation and Applied Science
• /
• v.38 no.2
• /
• pp.81-89
• /
• 2022

Purpose: Wireless endodontic handpieces (WEH) are widely used in dental clinics due to their convenience and portability. This study aimed to compare the vibration magnitudes and patterns generated by five WEH. Materials and Methods: Vibration acceleration of five WEH (X-Smart IQ, E connect S, Endo A Class, ENDOIT, and TRAUS ENDO) in the rotary and reciprocating motion was measured with accelerometer The average vibration acceleration was analyzed using the t-test, Welch's ANOVA test, and Dunnett T3 test at P < 0.05. Results: In all WEH, the average vibration acceleration in reciprocating motion was significantly higher than that in rotary motion (P < 0.001). In rotary motion, repeated vibration graphs of constant amplitude were obtained without sudden changes in the magnitude of vibration, and the average vibration acceleration value was high in the order of X Smart IQ, Endo A Class, ENDOIT, E Connect S, and TRAUS ENDO (P < 0.001), there was no statistically significant difference between X Smart IQ and Endo A Class. In reciprocating motion, a vibration graph was obtained in which large amplitude peaks appear at specific points within one cycle are repeated. The average vibration acceleration value was highest in the order of X Smart IQ, E Connect S, Endo A class, ENDOIT, and TRAUS ENDO (P < 0.001). Conclusion: Regardless of the type of WEH, greater vibration occurred in the reciprocating motion than in the rotary motion (P < 0.001). In the reciprocating motion, there was a difference in vibration for all handpieces (P < 0.001).