• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.16 no.5
• /
• pp.173-177
• /
• 2016

Korea, the traffic and transportation problems are significant because private cars are increasing constantly. Therefore, it is imperative to improve traffic condition so as to solve the problems such as traffic congestion and accidents which may occur due to the increase of vehicles in a limited area through the signal control. However, the current operating system for traffic control cannot provide car users the optimal signal but it generates a time delay of vehicles, traffic congestions etc. In this paper, we propose and implement the system based on V2X based automatic controller, which reduces the waste of time and the driver's psychological stress on the road intersection.

• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.16 no.6
• /
• pp.90-100
• /
• 2017

The purpose of this study is to detect and label the vehicles using the drone images as a way to overcome the limitation of the existing point and section detection system and vehicle gap estimation on Arterial road. In order to select the appropriate time zone, position, and altitude for the acquisition of the drone image data, the final image data was acquired by shooting under various conditions. The vehicle was detected by applying mixed Gaussian, image binarization and morphology among various image analysis techniques, and the vehicle was labeled by applying Kalman filter. As a result of the labeling rate analysis, it was confirmed that the vehicle labeling rate is 65% by detecting 185 out of 285 vehicles. The gap was calculated by pixel unitization, and the results were verified through comparison and analysis with Daum maps. As a result, the gap error was less than 5m and the mean error was 1.67m with the preceding vehicle and 1.1m with the following vehicle. The gaps estimated in this study can be used as the density of the urban roads and the criteria for judging the service level.

• Journal of Korean Society of Transportation
• /
• v.22 no.2 s.73
• /
• pp.165-175
• /
• 2004

본 고는 대전광역시 첨단교통모델도시 건설사업의 일환으로 구축된 DSRC(Dedicated Short Range Communication) 기술을 활용한 교통정보시스템 구축 사례를 소개함을 목적으로 한다. 공공부문에서의 구간정보 수집 및 가공 체계 구축은 본 대전 ITS 사업이 처음이며 더욱이 DSRC 기술을 구간정보 수집에 적용한 최초의 시도이다. 이에 시스템 구축과정에서 적지 않은 쟁점이 도출되었고, 많은 시행착오를 통해 그 해법을 찾아가며 현재 운영중인 시스템을 완공하게 되었다. 노변기지국(RSE)과 차량장치(OBE)간의 통신에 의해 수집된 자료는, 필터링, 검지기 지점정보, 패턴데이터 등과의 자료합성, 평활화, 통계정보 및 패턴정보 생성 등의 과정을 거쳐 구간소통정보가 산출된다. 현재 운영중인 본 시스템은 향후 지속적으로 보완 발전시켜 나가야 하며, 이를 위해 프로브 수집체계 보완, 시스템의 성능평가, 패턴데이터의 적절한 유지관리, 알고리즘의 지속적 발전 등을 향후과제로서 제시하였다. 본 고는 ITS사업에 있어 중요 쟁점중에 한 분야인 소통정보의 가공 절차를 공유함으로써, 관련 분야의 기술개발 촉진과 향후 유사시스템 구축의 시행착오를 줄이는데 기여할 수 있으리라 판단된다.

• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.4 no.3 s.8
• /
• pp.33-43
• /
• 2005

Traffic condition monitoring system serves as the foundation for all intelligent transportation system operation. Loop detectors and Video Image Processing are the most widely common technology approach to condition monitoring in korea Highways. Lane Usage is defined as the proportion of total link volume served by each lane. In this research, the lane Usage(LU) of two lane link for one day. Interval is 56% : 44%. The LU of three lane link is 39% : 37% : 24%. The LU of four lane link is 25% : 29% : 26% : 21%. These analysis reveal that each lane distributions of link are not same. This research investigates the general concept of lane usage by using collected loop detector data and the investigated that lane distribution is different by traffic lane and lane usage is consistent by time of day.

• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.15 no.3
• /
• pp.45-51
• /
• 2016

Existing real-time signal control system was brought up typical problems which are supersaturated condition, point detection system and loop detection system. For that reason, the next generation signal control system of advanced form is required. Following thesis aimed at calculating queue length for the next generation signal control system to utilize basic parameter of signal control in crossing queue instead of the volume of real-time through traffic. Overflow saturated condition which was appeared as limit of existing system was focused to set-up range. Real-time location information of individual vehicle which is collected by GPS data. It converted into the coordinate to apply shock wave model with an linear equation that is extracted by regression model applied by a least square. Through the calculated queue length and link length by contrast, If queue length exceed the link, queue of downstream intersection is included as queue length that upstream queue vehicle is judeged as affecting downstream intersection. In result of operating correlation analysis among link travel time to judge confidence of extracted queue length, Both of links were shown over 0.9 values. It is appeared that both of links are highly correlated. Following research is significant using real-time data to calculate queue length and contributing to signal control system.

• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.17 no.6
• /
• pp.173-184
• /
• 2018

As the portable traffic information collection system using probe vehicles spreads, it is becoming possible to collect road hazard information such as portholes, falling objects, and road surface freezing using in-vehicle sensors in addition to existing traffic information. In this study, we developed a integration and decision algorithm that integrates time and space in real time when multiple probe vehicles detect events such as road hazard information based on GPS coordinates. The core function of the algorithm is to determine whether the road hazard information generated at a specific point is the same point from the result of detecting multiple GPS probes with different GPS coordinates, Generating the data, (3) continuously determining whether the generated event data is valid, and (4) ending the event when the road hazard situation ends. For this purpose, the road risk information collected by the probe vehicle was processed in real time to achieve the conditional probability, and the validity of the event was verified by continuously updating the road risk information collected by the probe vehicle. It is considered that the developed hybrid processing algorithm can be applied to probe-based traffic information collection and event information processing such as C-ITS and autonomous driving car in the future.

• Journal of Korean Society of Transportation
• /
• v.29 no.1
• /
• pp.113-123
• /
• 2011

The application of micro-simulation model has been extended farther with improvement of computer performance and development of complicated model. To make a micro-simulation model accurately replicate field traffic conditions, model calibration is very crucial. Studies on calibration of micro-simulation model have not been enough while lots of studies on calibration of macro-simulation model have been continued in our country. This paper presents an auto-calibration of parameter values in micro-simulation model(VISSIM) using genetic algorithm. RMSE(Root Mean Square Error) of collected volume on the urban expressway versus simulated volume is set as MOP(measure of performance) and objective function of optimization is set as to minimize the RMSE. Applying to urban expressway(Nae-bu circular) as a case study, it shows that RMSE of optimized parameter values decrease 60.4%($19.3{\longrightarrow}7.6$) compared to default parameter values and the proposed auto-calibration system is very effective.

• Journal of Korean Society of Transportation
• /
• v.27 no.4
• /
• pp.175-181
• /
• 2009

Intelligent Transportation Systems(ITS) enables road users to enhance efficiency of their trips in a variety of traffic conditions. As a significant part of ITS, information communication technology among vehicles and between vehicles and infrastructure has been being developed to upgrade current traffic data collection technology through location-based traffic surveillance systems. A wider and detailed range of traffic data can be acquired with ease by the technology. However, its performance level falls with environmental impediments such as large vehicles, buildings, harsh weather, which often bring about wireless communication failure. For imputation of vehicle trajectory data discontinued by the failure, several potential existing methods were reviewed and a new method to complement them was devised. AIMSUN API(Application Programming Interface) software was utilized to simulate vehicle trajectories data and missing vehicle trajectories data was randomly generated for the verification of the method. The method was proven to yield more accurate and reliable traffic data than the existing ones.

• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.16 no.5
• /
• pp.72-84
• /
• 2017

Together with the Big Data of the 4th Industrial Revolution, the traffic information system has been changed to an section detection system by the point detection system. With DTG(Digital Tachograph) data based on Global Navigation Satellite System, the properties of raw data and data according to processing step were examined. We identified the vehicle trajectory, the link travel time of individual vehicle, and the link average travel time which are generated according to the processing step. In this paper, we proposed a application method for traffic management as characteristics of processing data. We selected the historical data considering the data management status of the center and the availability at the present time. We proposed a method to generate the Travel Time Index with historical link average travel time which can be collected all the time with wide range. We propose a method to monitor the traffic congestion using the Travel Time Index, and analyze the case of intersections when the traffic operation method changed. At the same time, the current situation which makes it difficult to fully utilize DTG data are suggested as limitations.

• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.16 no.6
• /
• pp.182-194
• /
• 2017

Most of the drone (Unmanned Aerial Vehicle) research in terms of traffic management involves detecting and tracking roads or vehicles. The purpose of analyzing image footage in the transportation sector is to overcome the limitations of the existing traffic data collection system (vehicle detectors, DSRC, etc.). With regards to this, drones are the good alternatives. However, due to limitation in their maximum flight time, they are appropriate to use as a complementary rather than replacing the existing collection system. Therefore, further research is needed for utilizing drones for transportation analysis purpose. Traffic problems often arise from one particular section or a point that expands to the whole road network and drones can be fully utilized to analyze these particular sections. Based on the study on the uses of traffic survey analysis, this study is conducted by extracting traffic flow parameters from video images(range 800~1000m) of highway unit segments that were taken by drones. In addition, video images were taken at a high altitude with the development of imaging technologies.