• Journal of the Korean Society of Propulsion Engineers
• /
• v.24 no.2
• /
• pp.14-27
• /
• 2020

Differential scanning calorimetry and numerical analysis were performed to estimate the performance degradation and ignition characteristics of the pyrotechnic device due to aging. The reaction kinetics extracted from the calorimetry are implemented into the numerical simulation of the igniter and the pyrotechnic delay, subjected to natural, thermal, and hygrothermal aging conditions. Also, combustion experiments are conducted to confirm that aging due to moisture is a major cause of performance failure of the pyrotechnic device as shown from the present numerical simulations.

• Journal of the korean academy of Pediatric Dentistry
• /
• v.44 no.1
• /
• pp.56-63
• /
• 2017

Delayed eruption of the first molar, without a generalized or localized cause, is usually associated with delayed development of the affected tooth. The aim of this study was to investigate the clinical features of the first permanent molar showing delayed development and eruption, and its association with developmental anomalies of other teeth. Panoramic radiographs of 40 healthy children showing delayed development and eruption of first permanent molars were analyzed. The clinical features of affected first molars and developmental anomalies of other teeth (except third molars) were evaluated. Delayed first molars were more frequent in the maxilla. The incidence of bilateral delayed development of first molars was greater than that of unilateral cases in female patients. In contrast, male patients showed unilateral delayed development of the first molar more frequently. A higher incidence of congenitally missing teeth was observed in patients with delayed first molar. In each case, delayed development or congenital absence was observed in the second molar adjacent to the delayed first molar. Overall, delayed first molar seems to be associated with congenital absence of additional teeth. Understanding the developmental mechanisms of this phenomenon requires further studies.

• Journal of the korean academy of Pediatric Dentistry
• /
• v.49 no.1
• /
• pp.95-103
• /
• 2022

The first permanent molars play a key role in maxillofacial development and occlusion. The purpose of this study is to investigate the characteristics and development stages of first molars with delayed eruption, and to evaluate their associations with congenital missing teeth. Eight-year-old patients who had delayed eruption in their first molars were classified into 75 patients with physical barriers and 77 patients without physical barriers. The development stages of the first and second molars in the delayed area were analyzed using Nolla method from the panoramic radiographs. The relationship between congenital missing teeth and delayed area was also investigated. Delayed eruption of first molars were more common in the maxilla alone. With the presence of physical barriers, male patients showed higher frequency in unilateral cases, while female patients had higher bilateral cases when there was no physical barrier. Delayed development of first molars were observed in delayed eruption area. In the absence of physical barriers, adjacent second molars were also developed slowly and the incidence of congenital missing teeth was high in delayed area. If first molars with delayed eruption are observed, clinical and radiographical follow-ups are necessary for the evaluation of their developmental stages and congenital missing teeth.

• Magazine of the Korea Concrete Institute
• /
• v.8 no.2
• /
• pp.32-40
• /
• 1996

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.21 no.7
• /
• pp.82-89
• /
• 2020

Among the explosives in ammunition, the delay elements, which are used as a retardant, could be influenced by the ambient temperature in the Republic of Korea, where the highest and lowest average annual temperature difference is clear. On the other hand, there has been no domestic research on this. This study examined the linear burning rates of the zirconium-nickel delay elements depending on the ambient temperature in South Korea. The ambient temperature data of South Korea were obtained from the meteorological administration, which was used to set the experimental conditions. The operational time for the K414 fuze was measured by changing the ambient temperature by 10 ℃ from -40 ℃ to 50 ℃. To convert the delay time into the burning rates, the height of the delay element in the K414 fuze body was used. The results indicated that the characteristics of the burning rates for the zirconium-nickel delay element could be estimated as linear, and both the burning rates and the delay time of the zirconium-nickel delay element were 2.73mm/ms and -4.18ms, respectively. This led to an approximately 80 ms delay time difference in the environment where the highest and lowest average annual temperature difference was above 20 ℃. Therefore, the delay time reflecting the ambient temperature should be considered when the test evaluation criteria of zirconium-nickel delay elements are established.

• Journal of the Korea institute for structural maintenance and inspection
• /
• v.26 no.4
• /
• pp.48-56
• /
• 2022

Controlling the setting time of cementitious materials is one of the most important factors in securing early-age performance of concrete structures. Recently, the use of retarding admixtures, which enable the inhibition of some hydration products to control the securing time due to average temperature rise is suggested. Although various non-destructive evaluation methods have been proposed to evaluate cement hydration and hardening of cement-based materials to overcome the limitations of Vicat needle test, experimental research is still required to use the non-destructive evaluation method with added retarding admixtures. In this study, measurements of electrical resistivity and ultrasonic wave velocity in early-aged cement pastes were performed according to the addition of retarding admixture(tartaric acid). The setting time of the cement pastes was evaluated by obtained rising time of the both non-destructive measurements. As a result, the possibility of evaluating the setting delay in cement pastes was confirmed through comparative analysis with the initial and final setting times by Vicat test. In addition, X-ray diffraction results at the rising time of electrical resistivity showed a key hydration product affecting the setting delay.

• Elastomers and Composites
• /
• v.13 no.3
• /
• pp.197-206
• /
• 1978

반응속도면(反應速度面)에서의 동력학적(動力學的) 연구결과(硏究結果)에 의(依)하면 2-메르캅토벤쪼티아졸(MBT)은 N-t-부틸-벤쪼티아졸썰펜아미드(BBTS) 또는 2-(4-몰폴리노티오) 벤쪼티아졸(OBTS)과 같은 가황촉진제(加黃促進劑)들 보다는 N-(싸이클로헥실티오)프탈이미드(CPT)가 훨신 더 빨리 반응(反應)한다는 사실(事實)을 탐지(探知)하였다. 또한 우수(優秀)한 가황지연제(加黃遲延劑)는 MBT와 급속(急速)히 반응(反應)하여야 하지마는 실소(室素)와 황(黃)과의 화학결합(化學結合)이 너무 약(弱)하여 내열안정성(耐熱安定性)이 없음으로 아무리 MBT와 빠른 속도(速度)로 반응(反應)하여도 좋은 가황(加黃)지연제가 될 수는 없다. 예를들면 N-(싸이클로헥실티오-O-벤쪼의 썰펜이미드(CTBS))는 CTP보다 더 빨리 MBT와 반응(反應)하지만 열안정성(熱安定性)이 부족(不足)하여 가황(加黃)지연제로서는 CTB 보다 좋지 못하다.

• Journal of the Korea Institute of Building Construction
• /
• v.14 no.2
• /
• pp.135-142
• /
• 2014

The heat of hydration can be reduced through the use of retarding agents. Typical retarding agents include sugar and glucose. However, these significantly delay the setting of cement paste. For the efficient use of sugar and glucose for mass concrete construction, it is necessary to develop a technique that can provide a setting behavior equivalent to that of plain concrete. In this work, the temperature rise of cement paste was monitored with the addition of various retarders including sugar and glucose. Hydrated cement powder was made with a water to cement ratio of 5 in order to accelerate the retarded cement pastes. It was found that the addition of hydrated cement powder in retarded pastes reduced the maximum temperature of cement paste. The use of hydrated cement powder could also successfully reduce the time to reach the maximum temperature.

• Journal of the Korean Recycled Construction Resources Institute
• /
• v.8 no.3
• /
• pp.365-371
• /
• 2020

In this study, in order to recycle the stems of opuntia cactus discarded after harvesting the fruit, the cactus stems were powdered and applied as a cement-based admixture. The powder of cactus stem was mixed into the mortar, and its effect on the fresh properties and strength of the mortar was studied. The results were compared with the properties of mortars produced by mixing with a retarder sugar and a viscosity agent methyl-cellulose, which are conventional saccharide-based admixtures. Based on the test results, the cactus stem powder did not clearly show the effect as a retarding agent, whereas the flow and the air content were similar to those of the mortar mixed with methyl-cellulose. This indicated that the cactus stem powder can be used as a viscosity agent. It was found that the strength of the mortar tended to increase when the mixing ratio of the cactus stem powder was lower than 0.3%.

• Journal of Aerospace System Engineering
• /
• v.14 no.3
• /
• pp.24-31
• /
• 2020

A study on the H2O2 based low toxic hypergolic propellant was conducted. The fuel candidates were chosen as a mixture of Amine solvent and reactive additive. The analytical performance was calculated via the NASA CEA code and 96% Isp of the NTO/UDMH was confirmed. The ignition delay measurement with drop test was performed and all candidates showed less than 10 ms in the best performance cases. Based on these results, the feasibility of high response H2O2 based low toxic hypergolic propellant was confirmed.