• Korean Journal of Remote Sensing
• /
• v.32 no.3
• /
• pp.307-321
• /
• 2016

Planetary Boundary Layer Height (PBLH) is a major input parameter for weather forecasting and atmosphere diffusion models. In order to estimate the sub-grid scale variability of PBLH, we need to monitor PBLH data with high spatio-temporal resolution. Accordingly, we introduce a LIdar observation VEhicle (LIVE), and analyze PBLH derived from the lidar loaded in LIVE. PBLH estimated from LIVE shows high correlations with those estimated from both WRF model ($R^2=0.68$) and radiosonde ($R^2=0.72$). However, PBLH from lidar tend to be overestimated in comparison with those from both WRF and radiosonde because lidar appears to detect height of Residual Layer (RL) as PBLH which is overall below near the overlap height (< 300 m). PBLH from lidar with 10 min time resolution shows typical diurnal variation since it grows up after sunrise and reaches the maximum after 2 hours of sun culmination. The average growth rate of PBLH during the analysis period (2014/06/26 ~ 30) is 1.79 (-2.9 ~ 5.7) m $min^{-1}$. In addition, the lidar signal measured from moving LIVE shows that there is very low noise in comparison with that from the stationary observation. The PBLH from LIVE is 1065 m, similar to the value (1150 m) derived from the radiosonde launched at Sokcho. This study suggests that LIVE can observe continuous and reliable PBLH with high resolution in both stationary and mobile systems.

• Korean Journal of Remote Sensing
• /
• v.34 no.2_1
• /
• pp.301-306
• /
• 2018

Urbanization causes urban floods and urban heat island in the summer, so it is necessary to understanding the changes of the thermal environment through urban climate and energy balance. This can be explained by the energy balance, but in urban areas, unlike the typical energy balance, the storage heat flux saved in the building or artificial land cover should be considered. Since the environment of each city is different, there is a difficulty in applying the method of retrieving the storage heat flux of the previous research. Especially, most of the previous studies are focused on the overseas cities, so it is necessary to study the storage heat retrieval suitable for various land cover and building characteristics of the urban areas in Korea. Therefore, the object of this study, it is to derive the regression formula which can quantitatively retrieve the storage heat using the data of the area where various surface types exist. To this end, nonlinear regression analysis was performed using net radiation and surface temperature data as independent variables and flux tower based storage heat estimates as dependent variables. The retrieved regression coefficients were applied to each independent variable to derive the storage heat retrieval regression formula. As a result of time series analysis with flux tower based storage heat estimates, it was well simulated high peak at day time and the value at night. Moreover storage heat retrieved in this study was possible continuous retrieval than flux tower based storage heat estimates. As a result of scatter plot analysis, accuracy of retrieved storage heat was found to be significant at $50.14Wm^{-2}$ and bias $-0.94Wm^{-2}$.

• Journal of Environmental Impact Assessment
• /
• v.25 no.6
• /
• pp.414-431
• /
• 2016

There are numerous closed and abandoned mines in Korea, from which diverse heavy metals (e.g., As, Cd, Cu, Pb, Zn) are released into the surrounding soil, groundwater, surface water, and crops, potentially resulting in detrimental effects on the health of nearby residents. Therefore, we performed human risk assessments of two abandoned metal mines, Yanggok (YG) and Samsanjeil (SJ). The exposure parameters used in this assessment were specific to residents near mines and the included exposure pathways were relevant to areas around metal mines. The computed total excess carcinogenic risks for both areas exceeded the acceptable carcinogenic risk ($1{\times}10^{-6}$), indicating that these areas are likely unsafe due to a carcinogenic hazard. In contrast, the non-carcinogenic risks of the two areas differed among the studied receptors. The hazard indices were higher than the unit risk (=1.0) for male and female adults in YG and male adults in SJ, suggesting that there are non-carcinogenic risks for these groups in the study areas. However, the hazard indices for children in YG and female adults and children in SJ were lower than the unit risk. Consumption of groundwater and crops grown in the area were identified as major exposure pathways for carcinogenic and non-carcinogenic hazards in both areas. Finally, the dominant metals contributing to carcinogenic and non-carcinogenic risks were As and As, Cu, and Pb, respectively. In addition, the carcinogenic and non-carcinogenic risks of YG were evaluated to be 10 and 4 times higher than those of SJ, respectively, resulted from the relatively higher exposure concentration of As in groundwater within SJ area. Because of lacking of several exposure parameters, some of average daily dose (ADD) could not be computed in this study. Furthermore, it is likely that the ADDs of crop-intake pathway included some errors because they were calculated using soil exposure concentrations and bioconcentration factor (BCF) rather than using crop exposure concentrations.

• Journal of the Korean earth science society
• /
• v.33 no.3
• /
• pp.259-268
• /
• 2012

To investigate the fluctuation of marine aerosol number concentration at each different size with vertical winds in ocean area, aerosol particles and vertical wind components were measured in the Ieodo Ocean Research Station, which is located to 419 km southwest of Marado, the southernmost island of Korea, from 8 to 22 June 2009. The Laser Particle Counter (LPC) and ultrasonic anemometer were used to measure the number of aerosol particles and vertical wind speed. Surface weather chart, NCEP/NCAR reanalysis data and sounding data were used to analyze the synoptic condition. The distribution of aerosol number concentration had a large fluctuation of bigger particles more than 1.0 ${\mu}m$ in diameter by vertical wind speed during precipitation. The aerosol particles larger than 1.0 ${\mu}m$ in diameter increased as the wind changed from downward to upward during precipitation. The aerosol number concentration of bigger size than 1.0 ${\mu}m$ in diameter increased about 5 times when vertical velocity was about 0.4 $ms^{-1}$. In addition, the accumulation and coarse mode aerosol number concentration decreased about 45% and 92%, respectively compared to concentrations during precipitation period. It is considered that vertical wind plays an important role for the increasing of coarse mode aerosol number concentration compared to the large aerosol particles sufficiently removed by the scavenging effect of horizontal winds. Therefore, the upward vertical winds highly contribute to the formation and increase in aerosol number concentration below oceanic boundary layer.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.39 no.4
• /
• pp.602-612
• /
• 2010

This study was conducted to investigate the state of hygiene education aimed for by bakers, and the evaluations of the importance and the performance concerning sanitary characteristics by the bakers. The questionnaires were administered to 186 bakers in Busan and the data evaluated by 5 scales method of Likert were statistically analyzed. 20.4% of bakers have not received hygiene education. Only 32.8% of bakers have experienced hygiene education regularly. The more the bakers were educated, the more they practiced the contents of hygiene education. The major reason of education unfulfilment was due to insufficient equipments and facilities. The scores of the hygienic performance of educated bakers were significantly (p<0.05) higher than those of uneducated bakers in food sanitation, especially for sanitary characteristics on inspection, pre-preparation and distribution. The mean scores of the importance and the performance evaluated by bakers were 4.05/5.00 and 3.76/5.00, respectively. The bakers assessed the highest scores on the importance and the performance of personal hygiene. The gap score was -0.30 between the importance and the performance for sanitary characteristics. The baker recognized that sanitary management was not performed as much as they recognized its importance. The importance and the performance grid of bakers revealed that the items of checking the certification for the origin of new food ingredient, inspecting deliveries as quickly as possible, separation between preparing and breading time, thawing frozen food under running tap water/in refrigerator, separating disposal gloves and utensils by the purpose, putting products in cleaned and sterilized utensils, letting consumes know the expiration date of products, preventing a rubber hose from being left on the kitchen floor, checking insect nets frequently and so on showed lower scores compared to the mean scores of the importance and the performance. The levels of the hygienic performance by bakers were positively correlated (p<0.01) with the recognitions of the importance on sanitary characteristics. These results might provide basic data for hygienic training and play a role on the improvement of the sanitary management in bakery.

• Journal of Bio-Environment Control
• /
• v.25 no.4
• /
• pp.225-231
• /
• 2016

Glasshouse heating package technologies to improve energy usage efficiency in winter were developed. Heating package was composed of the ground water source heat pump with heating capacity of 105kW, the aluminum multi-layer thermal curtain with six layers of different materials and the root zone local heater with XL pipes of ${\phi}20mm$. Venlo type glasshouse($461m^2$) with the heating package was compared with the same type and area control glasshouse with the light oil boiler, the usual non-woven fabric thermal curtain with respect to the glasshouse inside temperature, relative humidity, crop growth, and heating energy consumption. The results of test in paprika cultivation glasshouses showed that the air temperature inside glasshouse with aluminum multi-layer thermal curtain was maintained $2.2^{\circ}C$ higher than that of control glasshouse in un-heating night time and the temperature in bed with root zone local heating was $4.7^{\circ}C$ higher than that in bed without local heating. Average heating coefficient of performance(COP) of the ground water source heat pump used in paprika cultivation was 3.7 and the glasshouse inside temperature was maintained at $21^{\circ}C$ of heating set up temperature. The heating energy consumptions per 10a were measured at 14,071L of light oil and 364kWh of electric power for the control glasshouse and 35,082kWh for the glasshouse applied heating package. As results, the heating cost of the glasshouse applied heating package was 87 percent lower than that of control glasshouse. The growths of paprika in glasshouses of control and applied heating package did not show any significant difference.

• Journal of the Korean Institute of Landscape Architecture
• /
• v.38 no.4
• /
• pp.25-34
• /
• 2010

This study was conducted to develop evaluation indicators to improve athletic performance and operational management of golf courses and the results of the research are as follows. Through theoretical research and a preliminary professional survey, 15 on-going evaluations of golf course composition and operational management and 55 sub-evaluation indices were rejected while 10 on-going evaluations and 52 sub-evaluation indicators were reconfigured as final for environmental-friendliness, level of member services, level of human service of game personnel, difficulties of course, management level of the course, fairness of operational management, accessibility and location characteristic, traditions and ambiance of the golf club, quality of course, and course layout. When analyzing the important decision factors in golf course user preference evaluation indicators, the following contributed in the order of higher to lower contributions: the management level of the course, excellence of the course, level of human services for personnel, course layout and environmental-friendliness. When identifying the path coefficient of golf course evaluation indicators, the curvature of a hole and the length of the course had a causal effect on the 'course layout' section. Tournament facilities and various shot values had a causal relationship with 'excellence of the course', in the order of higher to lower, and convenience of waiting and fair allocation of reservations for 'fairness of operational management'. The history of the golf course and its environmental characteristics, history and culture of the region have relatively higher causal effects on 'traditions of the golf club' and geographical conditions on 'accessibility and location characteristics', pesticide and fertilizer usage and water pollution on 'environmental-friendliness', and member benefit and kindness of employees on 'level of member services'. The kindness and expertise of the game personnel had a relatively higher causal effect on the 'level of human services of game personnel', the location of tenning area, and location of OB and hazards on 'difficulties of course', and rough conditions and obstacles management on 'management level of the course'. There is a need to complete a systematic evaluation index system for golf course user preferences through future studies for a more detailed assessment, as well as a process to verify these evaluation indicators by application to domestic and international golf courses.

• Asia-Pacific Journal of Business Venturing and Entrepreneurship
• /
• v.10 no.5
• /
• pp.105-115
• /
• 2015

This study examined what effect the educational satisfaction level in the grey job project had on the business effectiveness and verified the effect the participant education satisfaction level had on the project business effectiveness ultimately by influencing the job satisfaction. This study utilized the source data of the senior job project old participant status survey of the Korea senior manpower development center which was conducted in 2013, and the non-proportional stratification sample extracting method was used which considered the project type, regional size, and cities/provinces. Sejong City was excluded from the survey target and the survey targeted 2,005 persons except for non-response or response-irrelevant persons concerning this study question. The collected material was analyzed by using SPSS WIN 21.0 program. The frequency and percentage were calculated to apprehend the general characteristic of the study target. Also, the regression analysis was conducted to examine the effect the educational satisfaction level had on the business effectiveness of the senior job project, and the hierarchical regression analysis was conducted in order to examine the mediated effect of the job satisfaction level in the effect the educational satisfaction level had on the business effectiveness of the senior job project. The main result of this study is as follows. First, among the effects the educational satisfaction level had on the business effectiveness, both interest level of educational contents and the job utilization of education had a significant effect on the psychological effect, and the interest level of the educational contents had a significant level on the physical/social effect, and the job utilization of education had a significant effect on the economic effect. Second, in the effect the educational satisfaction level had on the business effectiveness, the job satisfaction level was confirmed the job satisfaction level had a partial mediated effect in the effect the educational satisfaction level had on the psychological/physical/social effect. The job satisfaction level was confirmed the job satisfaction level had a complete mediated effect in the effect the educational satisfaction level had on the economic effect. Also, The job satisfaction level was confirmed the job satisfaction level had a partial mediated effect in the effect the educational satisfaction level had on the business effectiveness. Consequently, the educational contents according with the demand of job participants will have to be developed and the exclusive manpower must be arranged to conduct the education effectively. Also, making participants feel a pride on the job fully will largely contribute to raising the business effectiveness because the job satisfaction level has a positive effect on the business effectiveness.

• Journal of dental hygiene science
• /
• v.10 no.4
• /
• pp.219-225
• /
• 2010

The purpose of this study was to examine the patients' knowledge and expectation of dental implants and to provide effective consulting and accurate information on implants to them. To that end, between March 23, 2008 and June 5, 2008, patients who were visiting dental clinics (hospitals) in Seoul, Gyeonggi-do, and Incheon areas were surveyed. 84.7% of subjects said that they recognized implants, and the largest number of them (26.7%) of subjects came to know via friends. According to an analysis of subjects' knowledge of the dental implant operation, the maximum value was 4.06, and the minimum value was 3.05. The opinion value on the need to have regular examination after the implant operation was highest at 4.06. Regarding expectation over the implant operation, the maximum value was 4.42, and the minimum value was 1.78. The opinion value on considering the implant operation capability the most important was the highest at 4.42. The relationship between the knowledge of and expectation over implants was significant. By gender, females had a significantly higher level of knowledge than males. Regarding preference, females scored 3.27 points, and males scored 3.23 points. By occupation, professionals earned the highest score of 3.55 in knowledge, and professionals earned the highest score of 3.31 in expectation. According to an analysis of the relation between variables of knowledge of and variables of expectation over implants, the correlation coefficient (r) between the two factors was 0.362, indicating a positive relevancy(+)(p<.01).

• The Journal of the Petrological Society of Korea
• /
• v.26 no.2
• /
• pp.127-141
• /
• 2017

Jurassic granite from Geochang was analysed with respect to the characteristics of the rock cleavage. The multicriteria evaluation for the six directions of rock cleavages was performed using the microcrack spacing-related parameters derived from the enlarged photomicrographs (${\times}6.7$) of the thin section and the spacing-cumulative frequency diagrams. The results of analysis for the representative values of these spacing parameters with respect to the rock cleavage are summarized as follows. First, the analysis for deriving the main parameter indicating the order of arrangement among six diagrams was performed. The values of five parameters with respect to six directions of the rock cleavages were arranged in increasing or decreasing order for the above analysis. The decreasing order of the values of main parameter(mean spacing-median spacing, $S_{mean}-S_{median}$) and mean spacing are consistent with the order of H1, H2, G1, G2, R1 and R2 directions. These sequential arrangements of six directions of the rock cleavages can provide a basis for those of the six diagrams related to spacing. Second, the nine correlation charts between the above main parameter and various parameters were arranged in decreasing order of correlation coefficient ($R^2$). These related charts shows a high correlation of power-law function in common. The values of mean spacing, density (${\rho}$) and length of line oa are directly proportional to the value of main parameter, while the values of constant (a), exponent (${\lambda}$), spacing frequency (N), length of line oa', slope of exponential straight line (${\theta}$) and total length ($1mm{\geq}$) are inverse proportional. Third, the results of correlation analysis between the values of parameters for three planes and those for three rock cleavages are as follows. The values of frequency, total spacing, constant, exponent, slope and length of line oa' for three planes and three rock cleavages show an order of R' < G' < H' and H < G < R, respectively. On the other hand, the values of mean spacing, (mean spacing-median spacing), density and length of line oa show an order of H' < G' < R' and R < G < H, respectively. The correlation of the mutually reverse order of the values of parameters between three planes and three rock cleavages can be drawn. This type of correlation analysis is useful for discriminating three quarrying planes.