• The Journal of the Korea institute of electronic communication sciences
• /
• v.17 no.5
• /
• pp.1003-1012
• /
• 2022

The horizontal force transfer to the turbine and substructure of a wind power generation system is a very important factor in maintaining the safety of the system, but it is inevitably vulnerable to large-scale coastal disasters such as earthquakes and typhoons. Wind power generation systems built on the coast or far offshore are very disadvantageous in terms of economic feasibility due to an increase in initial investment cost because a more robust design is required when installed in areas vulnerable to coastal disasters. In this study, the GIS method was used to select the optimal site for a wind farm from the viewpoint of reducing the risk of coastal disasters. The current status of earthquakes in the West and South Seas of Korea, and the path and intensity of typhoons affecting or passing through the West and South Seas were also analyzed. Accordingly, the optimal offshore wind farm site with the lowest risk of coastal disasters has been selected and will be used as basic research data for offshore wind power projects in the region in the future.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2021.06a
• /
• pp.352-352
• /
• 2021

가뭄은 강수량의 부족으로 인한 기상학적 가뭄과 지표수 및 지하수의 부족으로 인한 수문학적 가뭄, 토양의 건조 상태로 인한 농업적 가뭄, 용수 및 전력공급의 제한으로 인한 사회·경제적 가뭄으로 분류될 수 있으며, 일반적으로는 어느 지역의 인간생활 및 사회 경제 활동이나 동식물 생육에 피해를 가져올 정도로 강수량 부족이 장기화되는 비정상적인 현상으로 정의할 수 있다. 메가가뭄의 선제적인 대비를 위한 메가가뭄의 사전감지를 위해 본 연구에서는 매년 가뭄 발생 및 확산 여부 판단을 통해 메가가뭄 예방/대비 목적의 년 단위 가뭄 전주기 분석을 위한 메가가뭄상태 판단 절차 방법론을 제시하였다. 메가가뭄 상태 판단 절차 방법론은 메가가뭄 확산 유무에 따라 6단계의 절차로 진행된다. 1단계로 전년도의 가뭄상태(Carry over의 유무)와 가뭄피해 실적자료(통합가뭄위험도 활용 )를 분석하여 확산여부를 판단하며, 2단계로 당해연도에 가뭄이 발생할 것인지를 장기예보와 더불어 MODIS 위성자료를 이용한 평년대비 토양건조상태로 감지한다. 3단계로 1개월 및 10일 예보자료를 이용해 기상학적 가뭄의 발생 여부를 가뭄지수로 판단하고, 4단계로 기상학적 가뭄 하에서 농업 및 수문학적 가뭄의 진행여부를 저수율, 지하수위, 현장대응 정보의 신속한 수집을 통해 확산여부를 판단한다. 5단계는 가뭄 관련 인터넷 뉴스데이터기반의 농작물 피해, 식수제한, 녹조발생 등의 피해상황을 통해 가뭄 피해발생지역을 도출하여 확산여부를 판단하며, 6단계는 기상, 농업, 수문, 사회 경제적 가뭄을 평가함과 더불어 다음년도 가뭄확산에 대비하는 순으로 메가가뭄 상태 판단 절차 방법론이 진행된다.

• Proceedings of the Plant Resources Society of Korea Conference
• /
• 2022.09a
• /
• pp.60-60
• /
• 2022

우리나라에 분포하는 팥꽃나무과(Thymelaeaceae) 산닥나무속(Wikstroemia) 식물은 산닥나무[Wikstroemia trichotoma (Thunb.) Makino], 거문도닥나무[W. ganpi (Siebold & Zucc.) Maxim.] 2종이 분포하고 있다. 산닥나무는 낮은 산지의 그늘진 계곡에서 주로 자생하며, 거문도닥나무는 임연부에서 주로 자생하는 것으로 알려져 있다. 현재 우리나라에 남아있는 자생지는 기후변화, 남획 등을 이유로 과거에 비하여 축소되어 유전자원의 현지 내·외 보전이 적극적으로 권장된다. 따라서 본 연구에서는 삼지닥나무, 산닥나무, 거문도닥나무의 생육환경 특성을 파악하여 보존 및 증식을 위한 기초자료로 활용하는 데 그 목적이 있다. 연구 결과, 확인된 자생지는 3지역 7개소로 산닥나무는 순천지역, 영암지역, 거문도닥나무는 고흥지역에 자생하는 것으로 확인되었다. 산닥나무는 해발고도 72-248 m, 사면 방위는 북사면, 동사면, 경사는 30-55°의 급경사지에서 주로 자생하는 것으로 확인되었으며, 방형구(10×10 m) 내 개체수는 8-20 개체가 확인되었다. 거문도닥나무는 해발고도 65-76 m, 사면방위는 동사면, 경사는 20-60°, 개체수는 15-25 개체가 확인되었다. 군집분석은 지표종 분석을 통해 가장 유의한 2개 군집으로 나뉘었으며, 산닥나무는 소나무 군집(Pinus densiflora Sieblod & Zucc.), 거문도닥나무는 곰솔(Pinus thunbergii Parl.) 군집으로 확인되었다. 군집의 안전성, 다양성을 나타내는 척도인 종다양성, 최대종다양도, 균재도 및 우점도지수는 소나무 군집 1.2303, 1.2788, 0.9621, 0.0389, 곰솔 군집이 1.1821, 1.2359, 0.9552, 0.0448로 확인되었다.

• The Journal of Engineering Geology
• /
• v.22 no.1
• /
• pp.83-94
• /
• 2012

Slopes are commonly formed both above and below roads located in mountainous terrain and along riversides. The Buk-sil site, a cut slope formed below the road, collapsed in October, 2010. A field investigation determined the causes of failure as improper drainage of valley water from the slope above the road and direct seepage of road-surface water. These factors may have accelerated the collapse via complex interaction between water and sub-surface structures such as bedding. Projection analysis of the site showed the possible involvement of plane, wedge, and toppling failure. Safety factors calculated by Limit Equilibrium Analysis for plane and wedge failure were below the standard for wet conditions. The wetness index, analyzed using topographic factors of the study area, was 9.0-10.5, which is high compared with the values calculated for nearby areas. This finding indicates a high concentration of water flow. We consider that water-flow control on the upper road is crucial for enhancing slope stability at the Buk-sil site.

• Korean Journal of Agricultural and Forest Meteorology
• /
• v.11 no.4
• /
• pp.221-232
• /
• 2009

The geographical distribution of freeze risk determines the latitudinal and altitudinal limits and the maximum acreage suitable for fruit production. Any changes in its pattern can affect the policy for climate change adaptation in fruit industry. High-definition digital maps for such applications are not available yet due to uncertainty in the combined responses of temperature and dormancy depth under the future climate scenarios. We applied an empirical freeze risk index, which was derived from the combination of the dormancy depth and threshold temperature inducing freeze damage to dormant buds of 'Changhowon Hwangdo' peach trees, to the high-definition digital climate maps prepared for the current (1971-2000), the near future (2011-2040) and the far future (2071-2100) climate scenarios. According to the geospatial analysis at a landscape scale, both the safe and risky areas will be expanded in the future and some of the major peach cultivation areas may encounter difficulty in safe overwintering due to weakening cold tolerance resulting from insufficient chilling. Our test of this method for the two counties representing the major peach cultivation areas in South Korea demonstrated that the migration of risky areas could be detected at a sub-grid scale. The method presented in this study can contribute significantly to climate change adaptation planning in agriculture as a decision aids tool.

• Journal of the Korean Geotechnical Society
• /
• v.33 no.10
• /
• pp.5-14
• /
• 2017

The hazard maps for predicting collapse on natural slopes consist of a combination of topographic, hydrological, and geological factors. Topographic factors are extracted from DEM, including aspect, slope, curvature, and topographic index. Hydrological factors, such as soil drainage, stream-power index, and wetness index are most important factors for slope instability. However, most of the urban areas are located on the plains and it is difficult to apply the hazard map using the topography and hydrological factors. In order to evaluate the risk of subsidence of flat and low slope areas, soil depth and groundwater level data were collected and used as a factor for interpretation. In addition, the reliability of the hazard map was compared with the disaster history of the study area (Gangnam-gu and Yeouido district). In the disaster map of the disaster prevention agency, the urban area was mostly classified as the stable area and did not reflect the collapse history. Soil depth, drainage conditions and groundwater level obtained from boreholes were added as input data of hazard map, and disaster vulnerability increased at the location where the actual subsidence points. In the study area where damage occurred, the moderate and low grades of the vulnerability of previous hazard map were 12% and 88%, respectively. While, the improved map showed 2% high grade, moderate grade 29%, low grade 66% and very low grade 2%. These results were similar to actual damage.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.28 no.1C
• /
• pp.19-29
• /
• 2008

As a part of study to develop LRFD (Load and Resistance Factor Design) codes for foundation structures in Korea, reliability analyses for driven steel pipe piles are performed and the target reliability indices are selected carefully. The 58 data sets of static load tests and soil property tests conducted in the whole domestic area were collected and analyzed to determine the representative bearing capacities of the piles. The static bearing capacity formula and the Meyerhof method using N values are applied to calculate the expected design bearing capacity of the piles. The resistance bias factors were evaluated for the two static design methods by comparing the representative bearing capacities with the design values. Reliability analysis was performed by two types of advanced methods: First Order Reliability Method (FORM), and Monte Carlo Simulation (MCS) method using resistance bias factor statistics. The static bearing capacity formula exhibited relatively small variation, whereas the Meyerhof method showed relatively high inherent conservatism in the resistance bias factors. Reliability indices for safety factors in the range of 3 to 5 were evaluated respectively as 1.50~2.89 and 1.61~2.72 for both of the static bearing capacity formula and the Meyerhof method. The target reliability indices are selected as 2.0 and 2.33 for group pile case and 2.5 for single pile case, based on the reliability level of the current design practice and considering redundancy of pile group, acceptable risk level, construction quality control, and significance of individual structure.

• Journal of Korea Water Resources Association
• /
• v.42 no.7
• /
• pp.547-558
• /
• 2009

General reliability assessment of levees embankment is performed with safety factors for rainfall characteristics and hydrologic and hydraulic parameters, based on the results of deterministic analysis. The safety factors are widely employed in the field of engineering handling model parameters and the diversity of material properties, but cannot explain every natural phenomenon. Uncertainty of flood analysis and related parameters by introducing stochastic method rather than deterministic scheme will be required to deal with extreme weather and unprecedented flood due to recent climate change. As a consequence, stochastic-method-based measures considering parameter uncertainty and related factors are being established. In this study, a variety of dimensionless cumulative rainfall curve for typhoon and monsoon season of July to September with generation method of stochastic temporal variation is generated by introducing Monte Carlo method and applied to the risk assessment of levee embankment using reliability index. The result of this study reflecting temporal and regional characteristics of a rainfall can be used for the establishment of flood defence measures, hydraulic structure design and analysis on a watershed.

• Journal of the Korean Society of Marine Environment & Safety
• /
• v.21 no.5
• /
• pp.608-616
• /
• 2015

In this study, we have estimated the storm surge heights using numerical modeling on coastal area, and then evaluated the vulnerability index by applying the vulnerability assessment techniques. Surge modelling for 27 typhoons affected from 2000 to 2014 were simulated by applying the ADCIRC model. The results of validation and verification was in significant agreement as compared with observations for the top 6 ranking typhoons affected. As results, the storm surge heights in Jinhae Bay, Sacheon Bay, Gwangyang Bay, Cheonsu Bay and Gyeonggi Bay were higher than other inner coastal areas, then storm surge vulnerability assessment was performed using a standardization, normalization and gradation of storm surge heights. According to results of storm surge vulnerability assessment, index of Jinhae Bay, Sacheon Bay, Gwangyang Bay etc. are estimated to be vulnerable(4~5) because of the characteristics of storm surge such as inner bay are vulnerable compared with exposed to the open sea areas. However, index in the inner bay of western Jeonnam are not vulnerable(1~3) relatively. It may not appear the typhoons affected significantly for the past 15 years. So, the long-term vulnerability assessment with the sensitivity of geomorphology are necessary to reduce the uncertainty.

• Journal of the Korean Geotechnical Society
• /
• v.19 no.4
• /
• pp.33-41
• /
• 2003

The large planar failure has occurred in a rock cut slope of highway construction site in Boeun. This area is considered to be unstable since the discontinuity, whose orientation is similar to the orientation of the failure plane, is observed in many areas. Therefore, several analysis techniques such as SMR, stereographic analysis, limit equilibrium, numerical analysis, which are commonly used in rock slope stability analysis, are adopted in this area. In order to analyze the stress redistribution and nonlinear displacement caused by cut, which are not able to be obtained in limit equilibrium method, DEM and shear strength reduction technique were used in this study. Then the factors of safety evaluated by shear strength reduction technique and limit equilibrium were compared. In addition, the factor of safety under fully saturated slope condition was calculated and subsequently, the effect of the reinforcement was evaluated.