• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.65 no.2
• /
• pp.142-150
• /
• 2020

This experiment was conducted to set ideal harvest time for itallian ryegrass (IRG) seed in reclaimed land. For IRG 'Kowinearly' variety sown in both autumn and spring, the peak growth in reclaimed land occurred in 20-30 days after heading. Plant height of IRG seedings in the spring was 90.4% of the fall-sown's plants. The yield of IRG seeds in reclaimed land was generally lower than that of farm land due to poor growth conditions. After heading, the lodging and shattering increased gradually with time. The highest yield of seed in the fall-sown trial treatment was 238 kg/10a. However, in the spring-sown treatment, the highest yield reached 169 kg/10a, which was 71% that of the fall-sown treatment. To set optimum harvesting time for IRG seed, morphological changes in the plant, moisture content of seed, and germination rate were analyzed according to time series after heading. After heading, IRG stem color had turned pink in 18 days and seed color also changed after 20 days. Following 20-25 days after heading, the seed moisture content decreased to below 55% and germination rate increased to over 90%. Therefore optimum harvesting time for IRG 'Kowinearly' variety in reclaimed land was 20-30 days after heading because germination rate and yields were high and shattering percentage was low.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.10 no.1
• /
• pp.44-53
• /
• 1999

In this paper, we propose a pilot based time-averaging channel estimation method and analyze error performances for efficient transmission of OFDM(Orthogonal Frequency Division Multiplexing) in multipath fading environment. Frequency domain channel estimations have been used in OFDM systems to compensate signal distortions due to fading on each subcarrier. The frequency domain estimation scheme uses scattered pilot to estimate channel response by simple interpolation. This implies that the estimated channel response includes signal distortions due to the noise. In this paper, we propose time-averaged channel estimation method to remove the distortion by noise. The proposed scheme can effectively remove noise components by taking time-average of the estimated channel response after estimating frequency domain channel. The computer simulations were performed to evaluate the performance of the proposed channel estimator. For the Rician channel, we compared the performance of the proposed method to that of a conventional one using channel estimation by gaussian interpolation when SER(Symbol Error Rate) = $10^{-4}$, and compared to perfect channel estimation case. The proposed method showed differences of 0.07 dB, 0.6 dB compared to perfect channel estimation and improvements of 1.7 dB, 1.9 dB for 16 QAM, 64 QAM respectively compared to conventional method.

• Journal of Bio-Environment Control
• /
• v.19 no.4
• /
• pp.333-342
• /
• 2010

For the energy-saving production of fresh vegetables in poor environment such as the Antarctic, a container-type plant factory was designed and developed. To maximize space usage of the 20 feet container ($L5.9m{\times}W2.4m{\times}H2.4m$), a three-level hydroponic cultivation system was installed and the nutrient solution was supplied by bottom watering. Using this system, 3 lettuce cultivars were grown under different the light source (light intensity). After 2 weeks from the transplanting, fluorescent lamp ($145\;{\mu}mol{\cdot}m^{-2}{\cdot}s^{-1}$) showed the best fresh weight of top part and leaf area. However, After 4 weeks, fluorescent lamp plus metal halide lamp ($150\;{\mu}mol{\cdot}m^{-2}{\cdot}s^{-1}$) led to the optimum growth of the each lettuce cultivar. The cultivar, 'Cheongchima', showed the best fresh weight of top part and leaf area, followed by 'Jeokchukmyeon' and 'Lollo rosa'. The chlorophyll concentrations (SPAD) showed no significant difference among the sources of lights. However, 'Cheongchima' showed relatively high chlorophyll concentration. With the above results, we found that the growth of lettuce is depend on light intensity and even at same intensity, the growth is different among the cultivars. Therefore, the selection of optimum cultivar should be considered in the plant factory system that has only weak light density.

• Journal of Korean Society for Geospatial Information Science
• /
• v.18 no.2
• /
• pp.55-61
• /
• 2010

Using 3D point data implemented from terrestrial LiDAR, this research has modelled geospatial data in 2 categories(gridded & un-gridded) and conducted LOS analysis experiment using outcome from the modeling exercise. To compare LOS analysis results from each of the 2 models in the above, maximum LOS (line of sight) range in the experimental area was specified as 30m in Area A, 40m in Area B and 50m in Area C and the time taken by LOS analysis and the number of visible points were measured. As for the LOS analysis experiment results, in comparison with the gridded model, the un-gridded model took about 3.9 times more time in Area A, 5.4 times in Area B and 6.5 times in Area C. In addition, about 0.97 times fewer points were measured in Area A, 0.93 times in Area B and 0.94 times in Area C. The difference between gridded model and un-gridded model in terms of the time taken by LOS analysis increased, as the maximum LOS range extended. On the other hand, the number visible points did not vary significantly in reference to the size of visible range.

• Ecology and Resilient Infrastructure
• /
• v.8 no.4
• /
• pp.212-222
• /
• 2021

In this study, the flow resistance coefficient was calculated considering the physical properties and distribution characteristics of floodplain vegetation, and the effect of floodplain vegetation distribution on flow characteristics was analyzed by reflecting it in a two-dimensional numerical simulation. The three-dimensional point clouds of vegetation acquired using ground lidar were analyzed to apply floodplain vegetation's physical properties to the existing formula for vegetation flow resistance calculation. The floodplain vegetation distribution in the modeling was divided into locally distributed and fully distributed conditions in the floodplain. As a result of the simulation of the study site, the flow resistance coefficient of floodplain vegetation was found to have a value of about five times or more compared to the flow resistance coefficient of the main channel bed when the design flood occurs based on Manning's n coefficient. Also, it affected the hydraulic characteristics in the main channel and floodplain.

• Korean Journal of Soil Science and Fertilizer
• /
• v.35 no.4
• /
• pp.232-242
• /
• 2002

To investigate the effects of arbuscular mycorrhizal (AM) fungus (Glomus intraradices) colonization on drought-stress tolerance, leaf water potential, chlorophyll concentration, P content and carbohydrate composition were examined in perennial ryegrass (Lolium perenne L.) plants exposed to drought-stressed or well-watered conditions. Drought stress significantly decreased leaf water potential, P content and leaf growth. These drought-induced damages were moderated by mycorrhizal colonization. Drought stress decreased the concentration of soluble sugars in shoots. AM plants had a higher foliar soluble sugar than non-AM plants under drought stress condition. Drought stress depressed the accumulation of starch and fructan in shoots, but stimulated in roots. Under drought-stressed condition, starch concentration in roots was higher in non-AM plants than in AM plants. Fructan was the largest pool of carbohydrates, showing the highest initial concentration and the highest net increase for 28 days of treatment. Drought stress slightly decreased fructan concentration in shoots, but remarkably increased in roots. Under drought-stressed condition, fructan concentrations in non-AM and AM shoots at day 28 were 18.7% and 13.3% lower than the corresponding values measured at well-watered plants. However, in the roots, fructan accumulation caused by drought was lessen 13.6% by mycorrhizal colonization. The results obtained suggest that mycorrhizal colonization improves drought tolerance of the host plants by maintaining higher leaf water status and P status, and by retaining more foliar soluble sugars.

• Horticultural Science & Technology
• /
• v.17 no.5
• /
• pp.578-580
• /
• 1999

The effects of the orchid mycorrhizal fungi isolated from Cymbidium goeringii were investigated on the growth of orchid plants. The plants, a hybrid of Cymbidium kanran Jeju${\times}$C. kanran Nangoku and Phalaenopsis were inoculated with the fungal isolates of Rhizoctonia repens (P1), R. endophytica (P2) and R. repens (P3; different from P1) on the oatmeal agars for two months. Then the orchid plants were cultivated in the greenhouse for eighteen months. The difference of plant growth after cocultivation for two months was not found among the treatments. After cultivation for four months, the growth of hybrid plants of Cymbidium kanran Jeju${\times}$C. kanran Nangoku was observed to be distinguished in the Rhizoctonia repens (P1). After cultivation in the greenhouse for eighteen months, the plant height, the number of shoots, the number of leaves, the number of roots and plant fresh weight of the hybrid of Cymbidium kanran Jeju${\times}$C. kanran Nangoku, inoculated with Rhizoctonia repens (P1), were significantly increased compared to those of the control. The plants inoculated with Rhizoctonia repens (P3) were not different and the plants inoculated with R. endophytica were poor compared to the control. The plant height and fresh weight of the Phalaenopsis, inoculated with Rhizoctonia repens (P1), increased significantly compared to those of the control. Overall, Rhizoctonia repens (P1), was the most effective for the growth of a hybrid of Cymbidium kanran Jeju${\times}$C. kanran Nangoku.

• Korean Journal of Environment and Ecology
• /
• v.20 no.4
• /
• pp.436-447
• /
• 2006

Recently, there is increasing demand on enhancing the efficiency of hydro-seed spraying in afforestation for damaged or degraded land including forest road slopes. In this study, we focus on how seed coating and molding may affect seed germination and seedling growth. Plant species used in the study are Lespedeza cyrtobotrya, Indigofera pseudotinctoria, Arudineila hirta, Poa pratensis, and Lolium perenne. The results of seed germination and seedling growth with and without seed coating and molding are analyzed as follows: 1. For all the species and in both seeding with molding covered with soil and seeding without molding in which seeds were over sown, the increment of germination ratio by seed coating method is greater than by non·coating one. Seed coating increases average germination ratios observed in seeding with molding and without molding by 11.2% and 21.4%, respectively. Germination force may decrease from 0.8 to 3.7 days depending on the plant species and the treatments. The $LD_{50}$ decreased by $0.8{\sim}2.6$ days. However, seed coating delays the start of germination by approximate 1 day for all of the observed plants. 2. Seed coating may have the effect of accelerating the growth of stem and leaf and root. The experimental result shows that seed coating leads to 21.7% and 34.8% increment of average stem and leaf growth by seeding with molding and without molding, respectively. In terms of root growth, seeding with molding results in 22.0% increment while seeding without molding produces 26.2% increased root growth. 3: Compared to seeding without molding, germination starts on an average of 1.3 days later in seeding coated seeds with molding. However. the germination ratio is increased by 5%, and germination force and $LD_{50}$ are observed to shorten by 1.0 day and 1.4 days, respectively. Meanwhile, whether seeds are coated or not may be more related with germination and seedling growth in seeding without molding than with those in seeding with molding. 4. In this study, coating materials are examined to look at which ones are better in each treatment. Coating with Vermiculite+Talcum is the most effective in germination and seedling growth for overall plants. Seed coating using Bentonite, Calcium Carbonate, and Calcium Hydroxide shows better results than non-coating does. 5. When seeds are coated, the greatest enhancement of seed germinations was observed in Indigofera pseudotinctoria and, in the case of seedling growth, Lespedeza cyrtobotrya has the most increasing observation value among the 5 examined species. These results may indicate that woody plant seeds, having greater sizes of seeds than ones of grass seeds, may have greater relation with seed coating than grass plant seeds may have. 6. Therefore, if seeds cannot be molded up after hydro-seeding on forest road slopes, it is recommended that seeds for restoration be pre-coated with Vermiculite+Talcum and then be sowed, in order to quickly stabilize the damaged slope and achieve successful afforestation.

• Journal of The Korean Society of Grassland and Forage Science
• /
• v.29 no.2
• /
• pp.111-120
• /
• 2009

There are barley, wheat, oat, rye and triticale winter cereal crops for whole crop silage. These small grains have been suitable to use for round-baled silage making as livestock feed. Studies were carried out to understand the growth and productivity of five winter cereals grown at paddy field in middle region of South Korea. The ratio of culm weight per plant were described by quadratic function for 5 winter cereals crops. The peak of culm ratio were 1 May in barley variety 'Youngyang', 5 May in wheat variety Keumkang', 10 May in rye 'Gogu'(Rye), 11 May in triticale variety 'Shinyoung' and 13 June in oat variety 'Samhan', respectively. The ratio of leaf per plant were linearly decreased by growing. In barley and oat, the ratio of spike weight per plant were linearly increased after heading, but in wheat and triticale, it were not accumulated at one time after heading and rapidly increased after fertilization. The ratio of spike weight per plant in barley was outstandingly higher than that of wheat, triticale, rye and oat, respectively. So, barley variety 'Youngyang' recommended for whole crop forage use was suitable for forage use because of high at ratio of the leaf and spike. The proper cutting date by the percentage of dry matter for baled-silage making, 30$[\sim}$40%, were 25 May in barley variety 'Youngyang', 25 May to 5 June in wheat variety 'Keumkang' and triticale variety 'Shinyoung', 15 May in rye 'Gogu' and 5 June in oat variety 'Samhan', respectively. The total aerial fresh weight accumulation at different cutting dates were described by quadratic function for barley, wheat and triticale. The forage fresh yield were peaked at 7 May in barley, 14 May in wheat, 17 May in triticale and late of May in oat, respectively. The dry matter yields of four small cereals were linearly increased after over-wintering. The yield at the date of proper harvesting time by water content for baled silage making were sequently high oat, barley, wheat, triticale and rye. The relative growth rate was relatively high in rye at early cutting but high in oat at late cutting. In barley, wheat and triticale, the rate were similar.