• Journal of Korean Society of Forest Science
• /
• v.103 no.2
• /
• pp.248-257
• /
• 2014

The objectives of this study were to identify the root plate dimension of wind-uprooted trees and to analyze the relationship among wind direction, aboveground and belowground properties of the trees. The root plates of 77 Japanese larches (Larix kaempferi) and 24 Korean pines (Pinus koraiensis), which were uprooted by a typhoon in 2012, in the Taehwa Experimental Forest of Seoul National University, Korea, were investigated. The results showed the root plate shape could be assumed to be an oval or a circle in above view, and half an ellipse in side view, respectively. Also, the number and surface area of individual roots in root plates were greater in uprooting direction than in non-uprooting direction. The results of correlation analyses between aboveground and belowground properties indicated DBH had more significant correlation with belowground properties than tree height. Finally, simple linear relationships were derived for significantly correlated tree aboveground and belowground properties.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2012.10a
• /
• pp.891-893
• /
• 2012

Currently, aircraft and automobile simulator for training provides a variety of training by making hypothetical situation on a simulator Installed on the ground Currently. And the instructor maximizes the effectiveness of the training by Monitoring training and instructing the required training. When trainees are boarding the aircraft or automobile. The Instructor in the ground is not able to monitoring aircraft, automobile. The assessment of the training is not easy after the end of the training Therefore, it is difficult to provide high quality of education to the students. In this paper, Simulation software is to develop the following. Collecting GPS and real-time information for aircraft, automobile ${\grave{a}}implementing$ 3D simulation. Implementing Current image of the aircraft or automobile in the screen by 3D Real-time monitoring of training situation at the control center utilizing for training saving 3D video files Analysis, evaluation on training After the end of the training.

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.27 no.5
• /
• pp.529-534
• /
• 2009

In this study, we investigate the feasibility of modeling entire image strips that has been acquired from the same orbital segments. We tested sensor models based on satellite orbit and attitude with different sets(Type1 ~ Type4) of unknowns. We checked the accuracy of orbit modeling by establishing sensor models of one scene using control points extracted from the scene and by applying the models to adjacent scenes within the same orbital segments. Results indicated that modeling of individual scenes with 1st or 2nd order unknowns was recommended. We tested the accuracy of around control points, digital map using the HIST-DPW (Hanjin Information Systems & Telecommunication Digital Photogrammetric Workstation) As a result, we showed that the orbit-based sensor model is a suitable sensor model for making 1/25,000 digital map.

• Journal of the military operations research society of Korea
• /
• v.33 no.2
• /
• pp.75-86
• /
• 2007

This paper presents the overall valuation framework of the Army Tactical Command Information System(ATCIS) with its empirical data which is developed by the ROK Army in 2005 with its own R&D efforts over the past 10 years. The valuation with the appropriate methods is conducted through the full and relentless support of ROK Army HQs, defense agencies, and related firms. And the results include both qualitative and quantitative values of the ATCIS in perspectives of economic, technical, and defense strength effects. As a result, the development of ATCIS is valued over 1.7291 trillion Won which is over 6.55 times benefit and cost ratio comparing with other country's similar system. The worth of this paper includes the actual framework and methods to apply the valuation of other weapon systems and its preliminary research, defense offset valuation, performance evaluation and others.

• Geophysics and Geophysical Exploration
• /
• v.18 no.4
• /
• pp.216-222
• /
• 2015

Airborne transient electromagnetic (ATEM) surveying was introduced several decades ago in the mining industry to detect shallow conductive targets. However, conventional ATEM systems have limited depth of investigation because of weak signal strength. Recently, the grounded electrical source airborne transient electromagnetic (GREATEM) system was proposed to increase the depth of investigation. The GREATEM is a semi-airborne transient electromagnetic system because a long grounded wire is used as the transmitter. Traditionally, ATEM sounding data have been interpreted with 1D earth models to save the computing time because modern ATEM systems generally collect large data sets. However, the GREATEM 1D modeling requires numerical integration along the wire, so it takes much more time than the 1D modeling of conventional ATEM. In this study, the adaptive Born forward mapping (ABFM) was applied to the ATEM 1D modeling because the ABFM is incommensurably faster than the ordinary GREATEM 1D modeling. Comparing the results from ordinary and ABFM 1D modeling, it was confirmed that the ABFM can be applied to the 1D modeling of GEATEM.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2016.05a
• /
• pp.287-287
• /
• 2016

최근 기후변화로 인해 돌발성 집중호우가 증가하는 추세로 홍수피해가 발생하고 있는데 이러한 피해를 예방하고 빠른 대처를 위해 강우의 정밀한 관측뿐만 아니라 강우의 정확한 공간 분포 파악에 대한 필요성이 중요하게 대두되고 있다. 그러나 일반적으로 지상우량계의 경우, 공간적인 강우분포 분석에 한계가 존재하여 레이더 강우자료와 함께 활용하는 연구가 진행되어 왔다. 따라서 본 연구에서는 강우장 추정시, 공간보간 기법인 크리깅 기법을 적용하여 강우장을 추정하고 유출 해석을 통해 그 적용성을 확인하고자 하였다. 국내에서 일반적으로 사용되는 크리깅 기법인 OK(Ordinary Kriging), CK(Co-Kriging) 외에도 KED(Kriging with External Drift) 기법을 적용하여 강우장을 추정하고 분포형 수문모형인 $Vflo^{TM}$의 입력자료로 사용하여 유출해석시 정확도를 비교 분석하였다. 추정된 강우장의 정량적 평가 결과, 지상강우만을 이용하는 OK 기법이 가장 우수한 결과를 나타내었다. 하지만 강우의 공간 분포 특성 반영 측면에서는 KED와 CK가 보다 더 좋은 결과를 나타내었다. 또한 유출해석의 경우 지형학적 매개변수 조정에 의한 강우 입력자료의 왜곡을 배제하기 위해 검 보정은 실시하지 않았으며 오차분석 결과에서 KED, CK, OK, Radar 순으로 관측유량을 잘 재현하는 것으로 확인되었다. 본 연구를 통해 공간보간 기법의 수문학적 적용성을 확인하였으며 모형의 검 보정을 통해 수문모형의 입력자료로서 활용성을 가질 수 있을 것으로 판단된다. 또한 이를 통해 생성된 강우장을 활용한다면, 관측망의 밀도가 낮은 지역과 미계측 유역 등에 적용하여 수문시스템해석에 도움이 될 것으로 판단된다.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2021.06a
• /
• pp.407-407
• /
• 2021

토양수분량은 그 양은 작지만 다양한 수문현상에 관여하는 주요한 수문인자 중 하나이다. 특히, 강우, 유출, 홍수 및 가뭄 등과 직접적인 연관이 있어 국내에서도 그 중요성이 점차 강조되고 있다. 일찍이 해외에서는 토양수분량 위성자료나 관측기기의 검증 및 교정을 위해 다수의 지상 관측소를 운영해왔으며, ISMN(International Soil Moisture Network)과 같은 기관을 통해 자료의 취합 및 품질관리, 배포 등도 활발하게 이루어지고 있다. 최근 국내에서도 최신 관측기기의 도입이나 수자원위성의 개발 등 토양수분량에 관한 연구가 점차 활발하게 이루어지고 있으며, 위성자료와 관측기기의 검증 및 교정을 위한 지상관측소도 점차 확대되고 있는 추세이다. 하지만, 국내 지상관측소는 현재 다양한 기관과 단체에 의해 운영되고 있으며, 품질관리 기준이 통일되어 있지 않아 자료의 접근 및 활용 측면에서 개선이 필요한 실정이다. 이에 한국수자원조사기술원은 국내 환경에 맞는 품질관리 기준을 제시하고, 자료의 접근성 및 활용성 개선의 토대를 마련하고자 품질관리 시스템을 개발하고 있다. 본 연구는 정량화된 품질관리 기준을 바탕으로 spike를 판별하는 알고리즘에 대한 성능평가를 다루고 있으며, 청미천 토양수분량 관측소 2020년 자료에 임의의 튀는 값(spike)을 추가하고, 해당 이상치의 검출여부를 확인하는 방식으로 진행되었다. 각각의 지점자료에서 강우사상 중 하강부, 무강우기간 중 하강부를 1개씩 선정하고, 해당 구간에 positive spike를 추가한 case와 negative spike를 추가한 case를 생성해 강우조건 및 spike 유형에 따른 검출성능 차이를 평가했다. 평가 결과, 강우기간 검출률 84.3%, 무강우기간 검출률 96.3%로 강우조건에 따른 성능차이가 명확하게 나타났으며, positive spike는 91.7%, negative spike는 88.9%로 spike 유형에 따른 검출성능차이는 미미했다. 강우조건과 spike 유형을 동시에 고려했을 때는 무강우기간의 positive spike가 98.2%로 가장 높은 검출률을 보인 반면에 강우기간의 negative spike는 83.3%로 가장 낮은 검출률을 보였다. 알고리즘이 검사시간대를 중심으로 24시간 동안의 토양수분량 변화를 감지하기 때문에 강우기간에 검출성능이 저하되는 것으로 판단되며, 이를 개선하기 위해선 강우사상에 따른 유동적인 window size 조절 알고리즘의 추가가 필요할 것으로 판단된다.

• Journal of Aerospace System Engineering
• /
• v.18 no.3
• /
• pp.34-40
• /
• 2024

Satellite images from Earth-orbit satellites are widely utilized in both the public sector and commercial industry. To achieve a high-quality satellite image service, satellite operation focuses on accurately transmitting images and information of space to users. In particular, the delivery time from ground system to user is the core factor of the quality of a ground station service. Thus, much development is underway to specifically shorten the time required for distribution to users. In this paper, we introduce an interface design of a ground station to shorten the delivery time from order to distribution, related to the archiving order of satellite images.

• Horticultural Science & Technology
• /
• v.34 no.6
• /
• pp.818-829
• /
• 2016

This study evaluated the responses of 18 potato cultivars to three levels of salinity stress (electrical conductivity, EC: 1.0, 4.0, and $8.0dS{\cdot}m^{-1}$). Stem, leaf, root, chlorophyll, tuber yield, and proline content were investigated and statistically analyzed using analysis of variance (ANOVA) and correlations. Stem number and stem diameter were not affected by salinity, but stem length and aerial weight showed highly significant responses to salinity. Aerial weight decreased with increasing salinity levels in most cultivars, while it increased in some the cultivars 'Daejima', 'Goun', 'Haryeong', and 'LT-8'. Leaf number, leaf area index, and leaf weight were most significantly affected by salinity and the cultivar ${\times}$ salinity interaction. Root length, root weight, total chlorophyll and chlorophyll a were affected by salinity, but not by the cultivar ${\times}$ salinity interaction. The opposite trend was shown in chlorophyll b. Although there was great variability among cultivars, tuber yield decreased in all cultivars, and was most significantly influenced by salinity and the cultivar ${\times}$ salinity interaction. 'Superior', 'Kroda', 'Romana', and 'Duback' gave better tuber yields under salinity at EC 4.0 and $8.0dS{\cdot}m^{-1}$ than the cultivars with better aerial weights. Proline content was increased by salinity in all cultivars, and was more remarkable in the cultivars with better aerial weights than in cultivars such as 'Superior' and 'Kroda' with better tuber yields. Leaf number, leaf area index, leaf weight, and root length parameters were considered to be useful criteria in the evaluation of salt tolerance because of their high positive correlation with tuber yield; however, given its negative correlation with tuber yield under high salinity, proline content was not. Salinity tolerances varied greatly among potato cultivars. The low correlation between growth and yields of aerial parts under high salinity suggests that, in commercial agriculture, it might be more practical to compare relative yields to controls. Additionally, 'Superior', 'Kroda', 'Romana', and 'Duback' might be very useful cultivars to use in breeding programs to develop salinity-tolerant potatoes, as well as for sustainable potato production in saline areas.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.44 no.12
• /
• pp.1087-1094
• /
• 2016

The responsibility of the vehicle holding device (VHD) is to hold the launch vehicle while it is stayed on launch pad and release the holding mechanism to allow a lift-off of launch vehicle at a moment of lift-off. During a release of the holding mechanism, in order to prevent the Ka doing a doing a doing mode which is vertical oscillation of entire liquid propellant and very severe for vehicle structure, gradual release of holding force is required. Also, a release operation of all 4 VHD should be synchronized very precisely. In this study, to comply the "gradual release and synchronized operation requirement", concept of VHD hydraulic system using an accumulator, pyro valve and orifice to control speed of hydraulic cylinder is proposed instead of using complicated hydraulic components. Then through multi-body dynamic analysis and computational hydraulic analysis, a size of orifice to meet a target speed of hydraulic cylinder is calculated. Through this study, simple and reliable VHD hydraulic system complying requirements is designed.