• Proceedings of the Korean Geotechical Society Conference
• /
• 2000.11b
• /
• pp.199-209
• /
• 2000

산악지를 절취하여 형성된 국내의 고속도로 상에 분포하는 절토사면은 그 분포갯수가 많아 분포현황 조차 파악이 어려운 상태이며 체계적인 관리가 되지 않은 상태였다. 본 논문은 지난 1년동안 현장조사된 자료를 토대로 국내 고속도로상에 분포하는 절토사면의 현황을 파악하고 노선별로 절토사면에 대한 현장조사자료를 분석하여 각암종별 사면의 붕괴유형 및 붕괴원인에 대해 분석하였다.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 1996.10a
• /
• pp.359-364
• /
• 1996

특정 지역에서의 진동환경을 파악하기 위해서는 그 지역 내에서 발생하는 진동원의 종류 및 지반을 통한 진동전파 현상을 예측하고, 해당 지역이 가지고 있는 진동환경에 관한 조건들이 동시에 고려되어야 한다. 이를 위해서는 지반동역학과 관련된 정보들과 함께 해당 지역의 지리적 또는 환경조건에 따른 정보 등 많은 정보의 종합적인 분석이 필요하다. 이를 위해 본 논문에서는 GIS Software인 PC ARC/INFO를 사용한 진동관리시스템을 개발하였다.

• Journal of the Computational Structural Engineering Institute of Korea
• /
• v.15 no.2
• /
• pp.367-377
• /
• 2002

This paper deals with the free vibrations of shallow arches resting on elastic foundations. Foundations we assumed to follow the hypothesis proposed by Pasternak. The governing differential equation is derived for the in-plane free vibration of linearly elastic arches of uniform stiffness and constant mass per unit length. Two arch shapes with hinged-hinged and clamped-clamped end constraints we considered in analysis. The frequency equations (lowest symmetrical and antisymmetrical frequency equations) we obtained by Galerkin's method. The effects of arch rise, Winkler foundation parameter and shear foundation parameter on the lowest two natural frequencies are investigated. The effect of initial arch shapes on frequencies is also studied.

• Geotechnical Engineering
• /
• v.14 no.6
• /
• pp.73-80
• /
• 1998

In order to identify clay minerals in the soft ground, which has been deposited along the coastline of the Korean peninsula, 14 samples have been taken at different locations and then X-ray diffraction analysis is carried out for them. It is known from the analysis that the various kinds of clay minerals mixed with different portions exist in the soft ground, but halloysite is not traced in any samples. It is featured regionally that kaolinite and illite are found in the western coast and the southern coast. Montmorillonites exists only in the western coast. This feature of regional occurrences can be explained with the help of geology of the region. Activities determined from physical properties of the soils do not coincide with those of clay minerals identified from X-ray diffraction analysis.

• Geotechnical Engineering
• /
• v.14 no.4
• /
• pp.163-176
• /
• 1998

To apply piezocone test to soil classification, several classification charts based on correlations between its results and basic characteristics of soils have been developed. However, it is necessary to investigate their applicability to Korean soil, since they were the results obtained from the limited number of foreign sites. In this study, 41 piezocone penetration bests for various sixtes spreading widely over Korean territory were carried out. Correlations between piezocone teat results and basic characteristics and the applicability of existing classification charts were investigated. Conclusively, new classification charts based, on Unified Soil Classification System were developed with a local confidence.

• Journal of the Korean Geosynthetics Society
• /
• v.16 no.1
• /
• pp.53-61
• /
• 2017

Seabed settlement and erosion sometimes occurr when a artificial reef is installed in soft seabed. Therefore, this study carried out CBR test and water tank settlement test to investigate settlement behavior of artificial reef according to reinforcement characteristics such as reinforced types and reinforced area. Soil types of ground are sand, silt and clay deposits. Three reinforced types were prepared: unreinforced, geogrid and hybrid bamboo mat(HBM) with different reinforced area. Laboratory test results indicated that reinforced artificial reef improved bearing capacity of ground and reduced settlement as reinforced area increased. Especially, reinforced HBM provided more bearing capacity and less settlement than reinforced geogrid.

• Geotechnical Engineering
• /
• v.5 no.4
• /
• pp.17-26
• /
• 1989

The creep ratio, which has been applied as a measure to prevent piping failure in designing embankments, has been originally proposed for the protection of masonry or concrete dam from piping along the boundary surface between the foundation soil and the bottom of the structure. In this study, it has been investigated whether this creep ratio could be applied for the earth embankment through the model test and we reevaluated the required creep ratio in the present design criteria. Based on this research, it was concluded that a piping failure would always occur within the embankment body and not through the boundary surface between the embankment and foundation. Therefore it could be said that the present design criteria are illogical to determine the design creep ratio according to less permeable soil no matter whether the soil forms embankment or foundation.

• Journal of the Korean Geotechnical Society
• /
• v.19 no.2
• /
• pp.217-225
• /
• 2003

The ground reinforcement effect of pressure grouting depends on grout penetration into ground. It is not, however, easy to predict the grout penetration in the design process because of the heterogeneity of ground conditions. This study investigates the proper grouting pressure and grouting method through laboratory model tests for pressure grouting using loose to medium dense crushed rock and sandy ground using specially designed and fabricated device. The optimum injection pressure, grout quantity and injection time are investigated through performing pressure grouting under changing conditions of injection in this test. From the test results, it was found that optimum injection pressure covers the range of 3 to 4kg/cm$^2$.

• Journal of the Korean Geosynthetics Society
• /
• v.7 no.2
• /
• pp.41-47
• /
• 2008

This paper describes the results of model experiments in the laboratory, which were conducted to assess the behavior characteristics of geosynthetic reinforced soil walls according to different surcharge loads and reinforcement types. The model walls were built in the box having dimension, 100 cm tall, 140 cm long, and 100cm wide. Three types of geosynthetics, geonet, geogrid A and geogrid B, are used as the reinforcements. Decomposed granite soil (SM) was used as a backfill material. Seven model walls are constructed and tested. After the construction of the model wall, the LVDTs are installed to obtain the displacements of the wall face. As the results of the model tests, the maximum horizontal displacements of the model walls occurred due to uniform surcharge pressure were measured at the 0.7H from the bottom of the wall. The more the reinforcement strength increases, the more the wall displacements decrease, and also the reduction ratio of the wall displacement decrease with increasing the surcharge pressure.

• Journal of Korean Society of Disaster and Security
• /
• v.10 no.1
• /
• pp.11-17
• /
• 2017

The case study on ground subsidence was conducted and the cause of ground subsidence was evaluated, main cause were insufficient site exploration, inaccurate strength parameters, defective temporary wall, insufficient reaction for boiling and heaving, excessive excavation and so on. Risk factors during excavation were identified from the cause of ground subsidence and risk factors were site exploration, selecting excavation method, structure analysis, measurement plan, excavation method construction, underground water level change, natural disaster and construction management. The survey of the experts on risk factors identified was conducted to evaluate the importance of risk factors, and confidence analysis was performed to evaluate the significance level between survey result and survey respondent using Chi-square Test.