• Journal of the Korean Geotechnical Society
• /
• v.25 no.11
• /
• pp.87-103
• /
• 2009

To determine the reliable probabilistic distribution model of geotechnical properties, outlier and randomness test for analysis data, parameter estimation of probabilistic distribution model, and goodness-of-fit test for model parameter and probabilistic distribution model have to be performed in sequence. In this paper, the probabilistic distribution model's geotechnical properties of Songdo area in Incheon are estimated by the above proposed procedure. Also, the coefficient of variation (COV) representing the variability of geotechnical properties is determined for several geotechnical properties. Reliable probabilistic distribution model and COV of geotechnical properties can be used for probability-based design procedure and reasonable choice of design value in deterministic design method.

• Journal of the Korean Geotechnical Society
• /
• v.16 no.6
• /
• pp.23-33
• /
• 2000

인천국제 공항에 분포하는 해성세립토 지반에서 일련의 CPTU와 DMT를 실시하고 그결과로부터 구한 비배수전단강도($s_{u}$ ), 과입밀도(OCR), 압밀계수($c_{h}$) 등과 같은 지반 정수와 기존의 시험자료 등을 분석하여 두 시험 결과를 비교하였다. 이 분석에의하면, CPTU와 DMT 두시험은 모두 피에조콘 정수, $B_{q}$ )로 분류하여 점성토인 지반에서 보다 신뢰성이 높은결과를 주었으며, 또한 해석방법에 따라 지반정수 산정결과에 큰 편차를 보여, 적절한 해석방법의 선택이 신뢰성있는 지반정수의 산정을 위한 주요한 인자임을 알았다. 그리고, 소성적 성질이 낮은 세립토 지반에서의 CPTU와 DMT를 이용한 비배수전단 강도 또한 과압밀비의 산정은 상당한 오차를 유발할 수 있다고 판단되었다.

• Journal of Korean Tunnelling and Underground Space Association
• /
• v.7 no.1
• /
• pp.51-61
• /
• 2005

In general the strength parameter of the ground will be changed by reinforcing the ground around tunnel. In this case, the concept of tunnel design, such as supporting system, excavation, lining and so on, should be modified based on the failure criteria or the ground changed by the reinforcement. This paper presents the variation mechanism of strength parameters and new failure criteria of the reinforced ground. In order to perform this research, theoretical and experimental works were carried out. It was clearly founded that the cohesion of strength parameters is only increased by reinforcement of ground, especially by rock bolting.

• Journal of the Korean Geotechnical Society
• /
• v.16 no.3
• /
• pp.67-75
• /
• 2000

본 연구에서는 지반의 비등방성을 고려한 점탄소성 bounding surface 모델의 정확성을 검증하고 모델정수의 영향을 고찰하였다. 이를 위하여 모델을 컴퓨터 프로그래밍 하였으며 실내시험을 실시하였다. 실내시험으로는 표준압밀시험, 등방/비등방 압밀 삼축압축시험, 크리프 시험 등이 실시되었다. 연구결과, 컴퓨터 프로그램을 이용한 해석결과와 실내시험 결과는 잘 부합되었으며, 탄소성 모델정수의 영향은 크지 않았으나 점소성 모델정수의 영향은 해석결과에 큰 영향을 미치는 것으로 고찰되었다.

• Geotechnical Engineering
• /
• v.24 no.1
• /
• pp.28-40
• /
• 2008

• Journal of Korean Society of Disaster and Security
• /
• v.10 no.1
• /
• pp.35-42
• /
• 2017

This is a comparative study on the characteristics of excavated soils, which is proceeded using soil strength parameter by literature, geotechnical investigation, standard penetration test by drilling, and downhole test by borehole at six sites in urban areas. The results of these site surveys are used as basic data for the evaluation and development of prediction of ground subsidence risk. Geotechnical properties are estimated with the result of standard penetration test-N value and literature. The dynamic geotechnical characteristics are also estimated with top-down seismic exploration at borehole.

• Geotechnical Engineering
• /
• v.9 no.4
• /
• pp.93-102
• /
• 1993

Soil structures which are constructed over the soft ground settle continuously by the self-weight of embankment for a long time. It is because of timetependent behaviours . consolidation and creep occurring simultaneously. This paper tries to determine the required parameters for analysis of the creep behaviour in marine clays and studied the effect of the confining stress and stress level on the creep parameters . As a result, it presents an equation for the determination of creep parameters according to stress level considering that elastic modulus El and creep parameter f are found to be affected by the applied stress level.

• Geotechnical Engineering
• /
• v.9 no.1
• /
• pp.21-30
• /
• 1993

To know the importance of soil paramters which are used to estimate the deformation and porepressure of soil, the sensitivity for soil parameters in elastic analysis is analyzed. Using the consolidation teat results of several cohesive soils, soil parameters are estimated by back analysis method, and from the parameters the deformations and porepressures of the soil are estimated by elastic analysis, In elastic analysis for soil-deformation and porepressure, the sensitivity for the Young's modulus is large, and the esimation of Young's modulus is more important in pro- portion to the size of stress. Using the measured results during initial short period in small stress, the soil parameters can be correctly estimated by back analysis method. To decrease the iteration number in back analysis and to get the better paramters, the initial measurements in more nodes are required and the more accurate initial measurements are required.

• Journal of the Korean GEO-environmental Society
• /
• v.19 no.6
• /
• pp.5-12
• /
• 2018

Domestic design manuals provide various empirical relationships of design parameters of soils with N values from the Standard Penetration Test (SPT), which can be widely used in the basic design process as well as during the construction process. However, the currently used empirical relationships are based on the data from foreign countries and are rarely evaluated with domestic data with currently used site investigation techniques. Therefore, in this study, those empirical relationships and conversion tables are evaluated with the geotechnical information in the Integrated DB Center of National Geotechnical Information and new empirical relationships are newly proposed with the consideration of domestic geotechnical conditions.

• Journal of the Korean Geotechnical Society
• /
• v.18 no.4
• /
• pp.45-53
• /
• 2002

There are some previous studies on the determination wave equation soil constants by SPT. However, methods suggested in previous researches had such analytical defects as the non-uniqueness of solutions, long-time consuming in computation, and lacking of accuracy due to the limit of available point values in time domain. In this paper, a modified procedure is proposed to improve the accuracy of determination of wave equation soil constants. It is based upon the least-error approach which minimizes the sum of errors between the measured and the recalculated wave values in total time domain. Finally, its applicability was verified by analyzing measured data presented on the released references.