• Korean Journal of Construction Engineering and Management
• /
• v.16 no.4
• /
• pp.60-69
• /
• 2015

Labor attendance management has traditionally been carried out by writing a table for checking an attendance of labor, which requires a lot of time and effort. As electronic devices with additions such as barcodes, Quick Response codes, and Radio Frequency Identification(RFID) have been developed, however, automated labor attendance management systems have appeared. Recently, various types of labor recognition devices converged with biometrics (fingerprint, vein, face recognition, etc.) have been released. However, although these devices can be used to check attendance automatically, there is insufficient guidance when it comes to selecting the appropriate labor attendance management system for construction sites. Therefore, this study proposed a decision framework to determine which labor attendance management system would be suitable for a construction site and to select the labor recognition device. This study investigated different labor recognition devices, focusing on how they worked, and tested the performance of devices and their usability for construction labor attendance management. The test results showed that RFID is most suitable when verifying the attendance of many laborers over a short period of time. The devices for hand vein and fingerprint recognition did not function when there was a foreign material such as cement or paint on the laborer's hand, except for a deformed finger. Reflecting these test results, this study suggested a framework for selecting a labor attendance system and recognition device; this is expected to contribute to the development of more efficient labor management systems.

• Journal of the Korean Institute of Intelligent Systems
• /
• v.13 no.6
• /
• pp.679-685
• /
• 2003

The cores and deltas of fingerprints designate the parts where the flow of the ridges change radically. Observations on the change of the orientation of the ridges around the cores and deltas enable us to guess the location of the cores and deltas. According]y clustering the orientation flowing to the same direction after doing research on the orientation of the ridges on the whole makes us see that the cores and deltas are shaping around the boundaries of the clustering area. It is also observed that The patterns of clustering of the orientation of the ridges classified as Arch, Tented Arch, Left loop, Right Loop and Whorl have its own characteristics respectively. In this paper the method of classifying the fingerprints effectively is proposed and proved its effectiveness by using the clustering of the orientation of the ridges, finding the cores of the fingerprints which don't secure the deltas.

• KIPS Transactions on Computer and Communication Systems
• /
• v.2 no.10
• /
• pp.427-436
• /
• 2013

In this paper, a method of moving path control of an automatic guided vehicle in an indoor environment through recognition of marker images using vision sensors is presented. The existing AGV moving control system using infrared-ray sensors and landmarks have faced at two critical problems. Since there are many windows in a crematorium, they are going to let in too much sunlight in the main hall which is the moving area of AGVs. Sunlight affects the correct recognition of landmarks due to refraction and/or reflection of sunlight. The second one is that a crematorium has a narrow indoor environment compared to typical industrial fields. Particularly when an AVG changes its direction to enter the designated furnace the information provided by guided sensors cannot be utilized to estimate its location because the rotating space is too narrow to get them. To resolve the occurrences of such circumstances that cannot access sensing data in a WSN environment, a relative distance from marker to an AGV will be used as fingerprinting used for location estimation. Compared to the existing fingerprinting method which uses RSS, our proposed method may result in a higher reliable estimation of location. Our experimental results show that the proposed method proves the correctness and applicability. In addition, our proposed approach will be applied to the AGV system in the crematorium so that it can transport a dead body safely from the loading place to its rightful destination.

• Proceedings of the Korea Information Processing Society Conference
• /
• 2003.11c
• /
• pp.2005-2008
• /
• 2003

본 논문에서는 생체의 특징을 이용해 신분을 증명 또는 인증하는 생체인식 기술 중 지문이나 장문, 정맥, 홍채를 이용한 인식과 같이 장비에 접촉해야만 인증이 이루어지는 것과 달리 거부감이 없고, 별도의 전문 장비를 필요로 하지 않아 일반 대중들에 쉽게 접근할 수 있는 얼굴인식을 인터넷에 적용한 원격 신분증명 및 인증 시스템을 제안한다. 얼굴인식 알고리즘은 얼굴 특징을 분석하는 방식에 따라 PCA (Principal Component Analysis), ICA (Independent Component Analysis), FDA (Fisher Discriminant Analysis) 등이 발표되어 있다. 이들 알고리즘을 이용해 얼굴 특징을 분석한 결과를 원격지에 신속하고 정확하게 송수신할 수 있는 시스템이 요구됨에 따라 생체인식 시스템의 비교 평가와 함께 인터넷 상에서 얼굴인식을 이용한 원격 얼굴인식 시스템의 구성을 제안한다.

• Proceedings of the Korean Society of Computer Information Conference
• /
• 2016.07a
• /
• pp.243-244
• /
• 2016

은행거래를 하려면 Active X를 기반으로 하는 보안 통합설치프로그램, 공인인증 보안프로그램, 개인 PC방화벽 프로그램 등 보안에 필요한 프로그램을 설치해야한다. 그러나 Active X의 보안취약점으로 앞으로 나올 브라우저에서는 Active X대신 웹 표준 모듈을 기반으로 하는 보안 시스템을 제공하고 있다. 본 논문은 Active X를 대체할 수 있는 것으로 웹 표준 모델에 근거한 QR코드 및 지문인식을 통한 인증을 제안한다. 본 논문에서 제안한 시스템을 적용한다면, 보다 안전한 은행거래를 하는데 도움을 줄 수 있다.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2013.10a
• /
• pp.719-721
• /
• 2013

A thinning stage of fingerprint algorithm occupies 39% cycle of microprocessor system for identification processing of image from fingerprint sensor. Hardware block processing is more effective than software one in speed and power consumption, because a thinning algorithm is iteration of simple instructions without a transcendental function. This paper describes an effective hardware scheme for thinning stage processing using Verilog-HDL in $64{\times}64$ Pixel Array. The hardware scheme is designed and simulated in RTL. The logic is also synthesized by XST in FPGA environment and tested. Experimental results show the performance of the proposed scheme and possibility of application for a soft microprocessor and thinning processor embedded fingerprint SoC.

• Proceedings of the Korea Institutes of Information Security and Cryptology Conference
• /
• 1995.11a
• /
• pp.254-261
• /
• 1995

본 논문에서는 암호화 시스템상에서 일반직으로 사용이 되는 EX-OR(Exclusive-OR) 방법을 광학 소자인 상용 LCTV(Liquid Crystal Television)를 이용, 2차원적으로 구현하는 방법에 대하여 설명하였다. 본 논문에서 제안한 시스템은 상용 LCTV의 인가 전압에 따라 가변되는 편광특성을 이용 편광 인코딩 방법으로 광학적 EX-OR를 수행하게 하였으며, 기존의 1차원적인 EX-OR를 2차원적으로 가능하게 하였다. 제안된 시스템은 2차원 데이타를 처리가 가능함으로 지문 인식이나 화상 인식을 통한 보안 시스템 구성 등에 그 응용이 가능하겠다.

• Proceedings of the Korean Society of Computer Information Conference
• /
• 2017.07a
• /
• pp.137-140
• /
• 2017

전자 출결의 방식으로 NFC, Bluetooth, Wi-Fi, RFID등의 통신 방식의 전자 출결과 생체 인식 방법의 전자 출결인 지문 인식, 홍채 인식, 얼굴 인식 등이 있다. 그러나 대부분의 전자 출결 시스템은 초기 구축 및 시스템 오류 발생에 따른 유지보수의 어려움이 존재하고, 통신 방식의 전자 출결에서는 신호의 간섭 및 감쇄로 인한 불안정한 출석 문제가 발생한다. 그리고 생체 인식방식의 전자 출결의 경우에는 고가의 장비가 요구된다. 본 논문에서는 스마트 폰 Application 및 머신 러닝 framework인 Apache Spark를 이용하여 초기 구축 단계 이후 발생하는 유지보수 비용을 최소화하고, 머신 러닝을 이용하여 얼굴 인식률을 높이는 방법을 제안한다. 또한 제안하는 시스템을 이용하는 사용자가 출결을 진행할수록 인식률이 향상되는 방법을 제안한다.

• Proceedings of the KIEE Conference
• /
• 2002.11c
• /
• pp.542-545
• /
• 2002

Position transfer and turning rotation between fingerprint and inputted fingerprint that is registered in automatic fingerprint recognition system are one of main cause that mistaken acknowledgment expression happens. Therefore, in this research, conformity algorithm development that do it so that is unrelated in position translation and rotation of fingerprint at feature point conformity step to secure higher correct recognition rate.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.11 no.1
• /
• pp.108-113
• /
• 2007

The classification of fingerprint images is to classify fingerprint images into varies fingerprint types, it is very important in automatic fingerprint recognition. In this paper, a new singular points detection technique was presented. A direction uniform measure is defined to describe the changes of direction fields in a certain neighborhood of fingerprint images. Singular points can be detected by adopting the measure. It should be pointed out that singular points in accurate positions would be obtained in this ways. And an improved Poincare exponential algorithm is presented to identify core points and triangle points. In this paper. making use of 102 experimental fingerprint images datas and attained 7.8% classification errors. This was better than experimental result of abstract [9]. It is possible to use on-line fingerprint images classification.