• Journal of the Korean Geophysical Society
• /
• v.3 no.1
• /
• pp.37-48
• /
• 2000

In order to investigate in-line ground motions caused by earthquakes, we examine the multicomponent complex trace analysis method (MCTAM) for the synthetic data and apply it to real earthquake data. An experimental result for synthetic data gives correct information on the arrival times, duration of individual phases, and approaching angles for body waves. Rayleigh waves are also easily identified with the MCTAM. A deep earthquake with magnitude of 7.3 was chosen to test various polarization attributes of ground motions. For P waves, instantaneous phase difference between the vertical and the in-line horizontal components ${\phi}(t)$, instantaneous reciprocal ellipticity ${\rho}(t)$, and approaching angle ${\tau}(t)$ are computed to be ${\pm}180^{\circ},\;0{\sim}0.25,\;and\;-30^{\circ}{\sim}-45^{\circ}$, respectively. For S waves, ${\phi}(t)$ tends to vary while ${\rho}(t)$ have values of $0{\sim}0.3\;and\;{\tau}(t)$ remains near vertical, respectively. A relatively low frequency signal registered just prior to the S wave event is interpreted as a P-wave phase based on its polarization characteristics. Velocities of P and S waves are computed to be 8.633 km/s and 4.762 km/s, and their raypath parameters 0.074 s/km and 0.197 s/km. Dynamic Poisson's ratio is obtained as 0.281 from the velocities of P and S waves.

• Proceedings of the Korean Geotechical Society Conference
• /
• 2004.03b
• /
• pp.807-814
• /
• 2004

Land seismic reflection survey has been increasingly demanded in various civil engineering works because of its own ability to delineate layers, water table, to detect cavities or fracture zones, to estimate seismic velocities of each layer. However, our shallow subsurface structures are very complex. The relatively thin layer(mostly soil) to the wavelength directly followed by a basic rock with high impedance used to generate complicated surface waves, kind of channel waves with high amplitude that is dominate in entire seismograms and hence the useful reflection events will be almost hopelessly immersed in the undesired surface waves. Thus, it would seem that the use of traditional seismic survey could not be likely to provide in itself a satisfactory information about our exploration targets. This paper hence introduces an efficient measuring strategy illustrating a properly controlled arrangement of the vertical single force sources commonly used, yielding a very sharply elongated form of P-energy with a minimum of S radiation energy, what we call, P-beam source. Abundant experiments of physical modeling showed that in that way the surface waves could be enormously reduced and the reflection events would be additive and thus reinforced. Examples of field data are also illustrated. The contribution of P-beam source will be great in civil engineering area as well as in general geological exploration area.

• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.39 no.7
• /
• pp.38-45
• /
• 2002

This paper derives the electric field integral equation to calculate scattering from arbitrary large target above and radiating of an electric line source within a lossy ground. Sommerfeld’s type integral requires a lot of time to calculate and has some difficulties and limitations for an analysis region. But SDP (steepest descent path) integration gives fast calculation of the integral, and the result shows that SDP integration has the validity for all over the analysis region with fast evaluation. Moment method with SDP integration is used to calculate the scattering of an arbitrary large conducting target and the results are compared with that of the numerical integration with Gaussian quadrature rule and GPOF (generalized pencil of function) method.

• Journal of the Korean Society of Propulsion Engineers
• /
• v.3 no.3
• /
• pp.53-61
• /
• 1999

Impinging jets are observed when exhaust gases from missiles or V/STOL aircrafts impinge on the ground, flame deflector, ship deck, etc. The flow shows different patterns according to the nozzle geometry, nozzle-to-plate distance, and plate angle, for example. This paper describes experimental works on the phenomena (pressure distribution, occurrence of stagnation bubble, and so on.) when underexpanded supersonic jets impinge on a perpendicular flat plate using a supersonic cold-flow system, and compares the results with those obtained using a shock tunnel. The flow characteristics for the supersonic cold-flow system were also investigated. Surface pressure distribution of supersonic cold-flow system differed from that of shock tunnel because of water and temperature in the low-pressure chamber. Surface pressure distribution as to underexpanded ratio showed similar patterns together.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.17 no.12 s.115
• /
• pp.1212-1223
• /
• 2006

Microwave(M/W) bands, though having great demand in wireless services, have been used mostly for long distance communications. As a result, the studies on their mobile radio models have been made less than on VHF/UHF. However, as the mobile communication services with M/W bands have been increasing, the development of a more accurate prediction model of the mobile radio environments has been demanded. The development of a reliable radio prediction model in the mobile radio environments requires the measurement and analysis of the characteristics of the radio waves according to reflection, diffraction and scattering of radio signals in various mobile radio environments. The proposed 8 GHz band radio prediction models have 2 different categories: (1) LOS model and (2) non-LOS model. The LOS model predicts signal strength using the analytic result with measured pathless exponents for the waves direct and reflected by ground and buildings, and the non-LOS model suggests a prediction model of received power by calculating the signal variations after diffraction.

• Journal of Institute of Control, Robotics and Systems
• /
• v.18 no.7
• /
• pp.644-649
• /
• 2012

This paper proposes the gait phase classifier using backpropagation neural networks method which uses the angle of lower body's joints and ground reaction force as input signals. The classification of a gait phase is useful to understand the gait characteristics of pathologic gait and to control the gait rehabilitation systems. The classifier categorizes a gait cycle as 7 phases which are commonly used to classify the sub-phases of the gait in the literature. We verify the efficiency of the proposed method through experiments.

• 한국공간정보시스템학회:학술대회논문집
• /
• 2005.05a
• /
• pp.355-361
• /
• 2005

3차원 자료의 필요에 발맞추어 3차원 좌표를 직접적으로 획득할 수 있는 LIDAR 시스템이 등장하게 되었다 항공 LIDAR 시스템은 항공기, GPS, INS, Laser Scanner가 통합된 시스템으로 항공기에서 발사된 Laser의 반사파를 이용하여 거리와 그 때의 항공기의 자세, 위치를 통합하여 직접적인 3차원 포인트 자료를 획득할 수 있다. LiDAR 데이터는 지형, 건물, 식생 등의 지면위에 있는 모든 객체에 대한 3차원 자료와 영상자료를 함께 제공하고 있다. 이러한 LIDAR 자료로부터 DEM, DTM 등의 지형 정보와 식목, 건물 등 지물정보를 추출하는 연구가 활발하게 이루어지고 있다. 본 연구에서는 지형을 추출하는데 사용할 수 있는 몇 가지 필터링기법을 선정하여 국내의 다양한 지모, 지물에 적용하고 그 정확도를 평가해 보았다.

• Proceedings of the KIEE Conference
• /
• 2015.07a
• /
• pp.1271-1272
• /
• 2015

송전선로 아래에서의 전기장과 자기장의 계산은 2013년 밀양 송전탑 사건에서 볼 수 있듯이 매우 중요한 문제로 대두되고 있다. 공간을 전파해 나가는 전자파의 특성과는 다르게 5~60Hz의 매우 낮은 주파수(ELF: Extremely Low Frequency)로 송전을 하는 송전선로에서는 발생원으로부터 거리에 따라 반비례하여 그 크기가 작아지는 정전기장 및 정자기장을 발생시킨다. 하지만 수백 kV의 높은 송전전압 때문에 주변에서의 전기장 자기장의 값이 매우 크게 되고 이로 인한 논란이 많기 때문에 정확한 정량적 해석이 불가피한 실정이다. 본 논문에서는 수백 kV로 송전되는 송전선로에서 발생 하는 전기장과 자기장을 해석적으로 계산하고 지면으로 부터 특정한 높이에 따라 전기장 자기장이 어떻게 변화 하는지에 대한 결과를 분석 하였다. 송전 선하에 전기장 및 자기장의 분포는 MATLAB을 통해서 계산 되었다.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.5 no.2
• /
• pp.263-268
• /
• 2001

This paper analyzes error probability performance adopted the Ray Tracing method efficiently analyzing millimeter wave or optic wave in Inter Vehicle Communication(IVC). Analysis environment analyzed bit error characteristic in 60㎓ band with very powerful to multipath wave, to be large to oxygen absorption and to be good to frequency reuse efficiency. We analyzed bit error characteristic of DS/CDMA system by multi access user in Two-Ray rician channel adopted reflect wave of grand, reflect wave of concrete wall and reflect wave of driving vehicle at side road. Improvement performance is adopted MRC diversity.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2001.10a
• /
• pp.680-683
• /
• 2001

본 논문은 대기에 의한 흡수율이 매우 큰 60GHz 대역에서의 전파 특성을 이용하여 근거리 차량간 통신 시스템에 적용하여 시스템을 분석한다. 근거리 차량간 통신에서는 전파환경이 직접파와 지면반사파 그리고 측면 차량, 도로벽면에 의한 다중경로가 존재하는 라이시안 분포의 특성이 존재하며 이러한 특성을 고려하여 밀리미터파 분석에 효율적인 Raytracing방법을 도입하여 차량간 통신 시스템을 분석한다. 또한 차량간 통신은 운전자의 안전성과 연결되어지기 때문에 매우 높은 신뢰성이 요구되어지며 따라서 MC-CDMA/QPSK 방식을 도입하여 시스템의 신뢰성을 확보하였으며 수신 성능 향상을 위한 개선기법으로는 BCH 부호화 기법을 적용하여 시스템의 성능을 비교 분석 한다.