• Proceedings of the Korean Society of Propulsion Engineers Conference
• /
• 2008.05a
• /
• pp.125-128
• /
• 2008

Atomization characteristics of small LRE-injector spray are investigated by using dual-mode phase Doppler anemometry (DPDA). Velocity, size, number density, and volume flux were measured at various injection pressures along the radial distance to make a close inquiry into spatial distribution characteristic of spray droplets. As the injection pressure increases, the velocity, turbulence intensity, number density, and volume flux of spray droplets become higher, whereas the droplet size ($D_{10}$ or $D_{32}$) gets smaller. Also, velocity and volume flux are proportional to Sauter mean diameter (SMD, $D_{32}$).

• Proceedings of the Membrane Society of Korea Conference
• /
• 1995.10a
• /
• pp.36-37
• /
• 1995

투과증발법은 기존의 증류법에 의해 분리되기 어려운 혼합물(공비혼합물이나 끓는점이 비슷한 혼합물)이외에 열에 민감한 생성물의 분리, 과익쥬스의 농축, 불순물 찌꺼기의 제거, 정량 검출을 위한 유기 오염물질의 농축 등에 이용되었으며 특히 물과 에탄올의 공비혼합물의 분리와 물로부터 희박 유기물질을 회수하는데 행해져 왔다. 본 연구에서 사용된 키토산은 친수성기들을 가지고 있기 때문에 물과 알코올의 분리에서 물을 선택적으로 투과시켜 효과적인 투과증발막으로 사용될 수 있으며 투과속도를 높이기 위해서 활성층이 매우 얇은 복합막을 제조하였다. 또한 키토산 복합막을 다양한 가교제 (glutaraldehyde, glyoxal, terephthalaldehyde, 황산등)로 가교한 막들을 열처리를 하거나 키토산과 PVA를 블렌드하여 제조한 키토산/PVA 블렌드 복합막을 이용하여 에탄올/물, IPA/물 혼합용액에서의 탈수 실험을 실시하여 이에 따른 투과성능의 영향을 살펴보았다.

• Transactions of the Korean Society of Automotive Engineers
• /
• v.13 no.6
• /
• pp.187-194
• /
• 2005

The objective of this study is to validate the hybrid breakup model and the vaporization model for GDI spray analysis at vaporization and non-vaporization conditions. The atomization process is modeled by using hybrid breakup model that is composed of Linearized Instability Sheet Atomization (LISA) model and Aerodynamically Progressed Taylor Analogy Breakup (APTAB) model. The vaporization process is modeled by using modified Abramzon & Sirignano model. The exciplex fluorescence method was used for comparing the calculated results with the experimental ones. The experiment and the calculation were performed at the ambient pressures of 0.1 MPa, 0.5 MPa and 1.0 MPa and the ambient temperature of 293K and 473K.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.39 no.7
• /
• pp.579-589
• /
• 2015

This study aims to understand the internal flow and the evaporation characteristics of a deionized water droplet subjected to vertical forced vibrations. To predict and evaluate its resonance frequency, the theories of Lamb, Strani, and Sabetta have been applied. To visualize the precise mode, shape, and internal flow inside a droplet, the experiment utilizes a combination of a high-speed camera, macro lens, and continuous laser. As a result, a water droplet on a hydrophobic surface has its typical shape at each mode, and complicated vortices are observed inside the droplet. In particular, large symmetrical flow streams are generated along the vertical axis at each mode, with a large circulating movement from the bottom to the top and then to the triple contact line along the droplet surface. In addition, a bifurcation-shaped flow pattern is formed at modes 2 and 4, whereas a large ellipsoid-shape flow pattern forms at modes 6 and 8. Mode 4 has the fastest internal flow speed and evaporation rate, followed by modes 8 then 6, with 2 having the slowest of these properties. Each mode has the fastest evaporation rate amongst its neighboring frequencies. Finally, the droplet evaporation under vertical vibration would lead to more rapid evaporation, particularly for mode 4.

• Journal of Radiation Protection and Research
• /
• v.24 no.2
• /
• pp.101-108
• /
• 1999

The influence of the relative humidity, the temperature and the velocity of supply air on evaporation rate has been studied with non-boiling forced evaporation system in order to treat very low level radioactive liquid wastes produced from the decontamination and decommissioning activities. Experimental data on the evaporation rate have been obtained with the divers variables and experimental equation of air velocity was also obtained by the correlation of those data. The decontamination factor of this system was also obtained by the experimental data from a simulated liquid waste containing Cs-137 radio isotope ; $DF=10^4$. Since the commercial system will be operated for the treatment of the very low level radioactive liquid waste produced from decontamination & decommissioning of TRIGA Mark-II&III research reactor, the environmental assessment has been conducted to improve the operational safety. Exposure dose rate for an individual member of general public was assessed, and it showed that it was very lower than individual dose limits. The release of radioactivity of radioisotope material (Cs-137) to the environment was assessed, and result showed that it was $4.637{\times}10^{-14}\;{\mu}Ci/cc$.

• Membrane Journal
• /
• v.9 no.3
• /
• pp.163-169
• /
• 1999

The effects of interactions between permeant molecules or permeant and membrane material have been investigated on the permeation behavior of permeants in pervaporation of water/alcohol mix¬tures. A poly(vinyl alcohol) (PVA) membrane crosslinked with glutaraldehyde was employed in this study. A homologous series of alcohols in aqueous solution were used as feed. The pervaporation experiments were carried out with feed having 70-97 wt.% of alcohol contents and at various feed temperatures. In a high alcohol content above 92 wt.%, the permeation rate was increased in the order of interaction strength between alcohol and water in feed. However, in a low alcohol content below 90 wt.%, the tendency of the permeation rate was found to be opposite. These observations were discussed in terms of changes in interaction between permeant/permeant or permeant/membrane in varying feed composition and feed temperature.

• Journal of the Korean Electrochemical Society
• /
• v.2 no.1
• /
• pp.46-49
• /
• 1999

Lithium cobalt oxide cathode for thin-film rechargeable lithium batteries were fablicated by electron-beam evaporation. Annealed lithium cobalt oxide, which was deposited on to stainless steel substrate, showed well-developed (003) planes of the hexagonal structure and potential plateau at $\~3.9 V$. Lithium cobalt oxide thin films had the stoichiometric Li/co ratio at high deposition rates and exhibited high discharge capacity at $15{\AA}/s$. As the annealing temperature increased, discharge capacity increased with maximum value at $700^{\circ}C$, but showed low capacity as a result of reaction with substrate above $700^{\circ}C$. Unuiformity of the lithium and cobalt in the depth profile gave initial capacity loss with charge/discharge performance.

• Economic and Environmental Geology
• /
• v.36 no.2
• /
• pp.103-109
• /
• 2003

The mineralogy of material left after evaporation of acid mine drainage water is generally dependent on the chemical composition of the source water. The residues formed by the evaporation of acid mine water in the Dong-hae coal mine area consists mainly of gypsum (CaSO$_4${\circ}$2$H_2O$) with mine. amounts of alunogen (Al$_2$(SO$_4$)$_3$${\circ}$17$H_2O$) and hexahydrite (MgSO$_4$${\circ}$<.TEX>6$H_2O$). Gypsum was identified from both of the bottom precipitates and the evaporation residues of acid mine water. Alunogen, an aluminum sulfate hydrate, was also formed by evaporation and occurred as needle-like crystals. Aluminum is derived from chemical dissolution of alumine-silicate mineral such as pyre-phyllite, illite and chlorite in wasted rocks. Hexahydrite in evaporation residues occured as needle-like, fibrous, and acicular crystals and was associated with gypsum and alunogen.

• Korean Journal of Soil Science and Fertilizer
• /
• v.44 no.5
• /
• pp.674-678
• /
• 2011

The model to estimate potential evapotranspiration (PET) was developed using periodic function. Average PET during 30 years for 67 areas was $2.36mm\;day^{-1}$, and those were distributed with the range of $1.42{\sim}3.45mm\;day^{-1}$. The period of PET change was 16~32 years according to area.

• Membrane Journal
• /
• v.3 no.2
• /
• pp.41-50
• /
• 1993

최근 산업의 고도화 및 다변화호 인한 고순도, 고품위의 제품이 요구됨에 따라 분리공정은 대단히 중요한 공정으로 인정되고 있어 화학공업, 식품공업, 약품공업 등의 공업분야뿐만 아니라 의료, 생화학 및 환경분야에 이르기까지 중요한 연구과제가 되고 있다. 분리공정은 열역학적 상평형 원리에 기인한 분리방법과 물질이동 즉, 이동속도 원리에 기인한 분리방법과 물질이도 즉, 이동속도 원리에 기인한 분리방법으로 구별할 수 있는데 이는 혼합물의 동적 성질, 특히 확산성이나 침투속도가 서로 다른 것을 이용한 것이다. 막을 이용한 분리공정은 막의형태, 조작원리 및 적용분야에 다라 정밀여과, 한외여과, 역삼투, 기체분리 및 투과증발 등으로 분류되며 이는 고분자막에 존재하는 Pore의 크기, 막의 균일성, 대칭성 및 막의 하전형태에 따라 구분한다.