• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.36 no.6
• /
• pp.579-582
• /
• 2012

Removing residual water in a fuel cell is a critical operational process for managing its performance and controlling its lifetime. Understanding the mechanism of water transport in fuel cells is essential for the design of the water removal process. In this study, an experimental method for measuring the water evaporation rate through a gas diffusion layer, which is a porous medium, under steady-state conditions was developed. Experimental bench tests were conducted to apply the developed method. Then, the effects of various parameters of the drying gas and the gas diffusion layer were experimentally measured. The water evaporation rate increased as the humidity of the drying gas decreased and the flow rate of the drying gas increased. In addition, a thinner gas diffusion layer yielded a higher water evaporation rate.

• Journal of Advanced Marine Engineering and Technology
• /
• v.36 no.8
• /
• pp.1010-1015
• /
• 2012

DME(Dimethyl ether) is the one of the massive energy sources synthesized from natural gas. KOGAS has already developed the commercial-scale production plant of DME and has been doing to obtain overseas resources to meet the domestic needs. This paper presents the DME storage tank design criteria by stress and strain analysis, and the experimental study on the evaporation phenomena of DME by thermal intake and physical rolling movement of DME FPSO or cargo vessel, because the various moving motions along with heat intake cause the evaporation of low temperature liquid. The experimental result shows that the evaporation rate was increased with larger rolling degree and higher liquid level. The rolling motion leads to evaporate about 20% increase with 15 degree rolling based on the evaporation quantity without rolling.

• Journal of Climate Change Research
• /
• v.3 no.2
• /
• pp.153-159
• /
• 2012

CFC-12 used in mobile air conditioning(MAC) system has been replaced by R-134a, a type of HFC refrigerant, from 1991 to 1994. R-134a has since been widely used as a refrigerant of a mobile air conditioner. However, it is one of the six main green house gases listed in Kyoto Protocol, which makes it imperative to regulate its emission and develop alternative refrigerants. In this study, the concentration of leaked R-134a was measured using VT(Variable Temperature) shed and Running loss test shed to analyze the level of air conditioner refrigerant leaked in a vehicle. According to the analysis of the concentration of R-134a leaked from a vehicle parked, annual leakage amount of R-134a was in the range of 6.46~13.28 g/yr. The figure was similar with the leakage from the mobile air conditioning system currently used. In a study using the same vehicle model, a vehicle equipped with dual evaporation system had a higher leakage rate of refrigerant than a vehicle with a single evaporation system. It appears that the added fittings and joints of the dual evaporator system led to higher leakage rate. Besides, the analysis of the change in R-134a concentration under various car speed found that more refrigerant leaked under high speed(100km/hr) and but the volume of the wind did not affect to the variation of refrigerant leakage.

• Proceedings of the Korea Society for Energy Engineering kosee Conference
• /
• 2003.05a
• /
• pp.503-508
• /
• 2003

IGCC 가스터빈의 연료로는 주로 CO와 H$_2$ 가연성분이 대부분인 석탄과 중사유 가스를 사용하며, 발열량은 천연가스의 1/5~1/10정도이다[1]. 이러한 증발열량 가스연료는 기존의 천연가스나 석유를 연소연료로 사용한 발전시스템에 그대로 적용되어 사용하는데는 무리가 따른다. 이는 천연가스나 석유에 비해 중, 저발열량의 연소특성이 매우 다를 수 있기 때문이다.(중략)

• Journal of The Korean Society of Agricultural Engineers
• /
• v.53 no.3
• /
• pp.65-73
• /
• 2011

기후변화는 에너지 수지와 물 수지의 변화를 초래하여 육상 생물권에 영향을 미칠 것이다. 기온과 강수량의 변화와 대기중의 탄산가스 농도 변화는 작물의 생육환경을 크게 변화시킬 것이다. 본 연구에서는 FAO AquaCrop 모형을 이용하여 기온과 강수량의 변화와 대기중 탄산가스 농도의 변화가 짐바브웨의 옥수수 수확량에 미치는 영향을 분석하였다. 미래 기후 값은 HadCM3 모형 예측 값을 change factor 기법으로 상세화 하였다. 배출 시나리오는 A2와 B2를 선정하였으며 시간대는 2020s, 2050s 및 2080s의 30년 기간을 선정하였다. 기준작물 증발산량은 Penman-Monteith 식으로 산정하였다. 관개용수 공급이 충분한 것으로 가정하고 전통적인 보충관개를 실시하였을 때 기준년도 (1970s)에 비해 옥수수 증발산량은 최대 26 %, 옥수수 잠재 수확량은 최대 93 %까지 증가할 것으로 예측되었으며 물의 생산성은 최대 53 %까지 증가할 것으로 예측되었다.

• Proceedings of the Membrane Society of Korea Conference
• /
• 1995.04a
• /
• pp.38-39
• /
• 1995

최근 자동차 대체 연료로 가솔린에 10% 무수에탄올이 혼합된 Gasohol 사용에 관한 관심이 고조되고 있으며, 이는 Gasohol이 자동차 배기 가스중의 일산화탄소 및 탄화수소 함유량을 감소시켜 대기 오염을 줄일 수 있기 때문이다. Gasohol에 사용되는 무수에탄올의 농도는 99.5% 이상이어야 하며, 이러한 고순도의 에탄올을 제조하기 위해서는 물과 에탄올의 공비 혼합물(95.6% 에탄올)로부터 공비증류, 분자체 흡착, 투과증발과 같은 분리 조작을 이용하여 물을 제거하는 공정이 필요하다. 현재 에탄올 탈수에는 공비증류가 많이 사용되고 있으나 공비증류는 에너지 사용량이 많을 뿐더러 유독한 Entrainer를 첨가하기 때문에 투과증발과 같은 저 에너지 소비형, 환경친화적인 공정으로의 전환이 이루어지고 있다. 에탄올 탈수용 투과증발 플랜트는 전세계 20여개가 가동되고 있으며, 상업화된 플랜트의 대부분은 독일의 Deutsche Carbone사가 제조한 PVA/PAN 투과증발 복합막을 사용하고 있다. 투과증발 시스템은 물에 대한 친화도가 높은 투과증발막 및 모듈, 기타 분리 구동력을 높여주기 위한 Heater, 진공펌프, 냉각기, 열 교환기 등의 주변 설비로 구성되며, 투과증발 시스템 개발을 위해서는 우수한 막/모듈 제조와 아울러 최적 공정 설계 기술 개발이 필수적이라 하겠다.

• Transactions of the Korean hydrogen and new energy society
• /
• v.34 no.6
• /
• pp.650-656
• /
• 2023

In order to efficiently control boil-off rate of a liquefied hydrogen tank, the important thing is to maintain an appropriate vacuum level. however, compared to small and medium-sized storage tank, it is very difficult to create and maintain vacuum in large-capacity storage tanks. In this study, we aim to determine the target level of future large-capacity storage tank technology development and secure basic data on performance test methods by analyzing the corelation between evaporation gas and thermal conductivity of liquefied hydrogen storage tanks.

• Journal of Ocean Engineering and Technology
• /
• v.11 no.4
• /
• pp.159-168
• /
• 1997

본 연구는 Moss형 LNG선박의 방열구조에서 LNG탱크에 침입하는 열량과 선체의 온도분포를 예측하고, 운항 중 LNG탱크를 Cooling down(예냉)하는 경우 발생하는 비정상상태에서 LNG탱크에 발생하는 국부적인 열응력을 검토할 수 있는 비정상 온도분포해석과 LNG증발량을 검토하였다. 특히 운항 중인 선박을 대상으로 일반적인 수치계산시에 필요한 각종 입력절차를 간소화 하고 경계조건 선정시에 비 전문가도 쉽게 이용할 수 있는 전산프로그램을 개발하였다. Moss형 LNG탱크의 예냉작업에 필요한 최적의 냉매량과 예냉조건을 비정상상태에서 해석한 것은 설계자 및 선박 운항자에게 유용하게 이용될 것이다.

• Journal of Advanced Marine Engineering and Technology
• /
• v.41 no.3
• /
• pp.182-190
• /
• 2017

All liquids contain a small amount of gaseous components and the amount of gases dissolved in a liquid is in accordance with Henry's Law. In a multi-stage thermal-type seawater desalination plant, as the supplied seawater undergoes variations in temperature and pressure in each evaporator, the gases dissolved in the seawater are discharged from the liquid. The discharged gases are carbon dioxide, nitrogen, oxygen, and argon, and these emitted gases are non-condensable. From the viewpoint of convective heat transfer, the evaluation of non-condensable gas released during a vacuum evaporation process is a very important design factor because the non-condensable gases degrade the performance of the cooler. Furthermore, in a thermal-type seawater desalination plant, most evaporators operate under vacuum, which maintained through vacuum system such as a steam ejector or a vacuum pump. Therefore, for the proper design of a vacuum system, estimating the non-condensable gases released from seawater is highly crucial. In the study, non-condensable gases released in a thermal-type seawater desalination plant were calculated quantitatively. The calculation results showed that the NCG releasing rate decreased as the stage comes getting a downstream and it was proportional to the freshwater production rate.

• Journal of the Korean Institute of Gas
• /
• v.25 no.1
• /
• pp.7-13
• /
• 2021

The re-liquefaction drum is a product that installed spray nozzles at the top to directly spray overcooled LNG into evaporative gas and installed demistors to facilitate gas separation, which was developed to increase the re-liquidity efficiency of small scale re-liquefaction facilities. In the hydrostatic test of the drum, no leakage occurred even at a pressure of 1.5 times the design pressure, but during the BOR(Boil Off Rate) test, the bolt loosening occurred due to contraction and expansion by temperature change. For the continued use of the product, insulation construction on flange connections was developed to enable detachment and attachment, and the comparison of heat load with existing insulation confirmed that it was very small compared to the inlet flow rate in the drum.