• Korean Chemical Engineering Research
• /
• v.60 no.2
• /
• pp.255-259
• /
• 2022

Solar membrane steam generation is a very promising technology that can harvest purified water from seawater or wastewater during the current danger of running out of pure water. However, solar Membrane steam generation had direct contact with water, making it difficult to increase the efficient amount of evaporation. Here, we propose solar membrane steam generator composed of polydimethylsiloxane (PDMS) and graphene oxide (GO) and improved evaporation through wettability control in part throughout the water-absorbing membrane. Wettability control has shown significant improvements in thermal localization and temperature rise in the area of heat exchange with sunlight. The evaporator has an evaporation rate of 1.54 kg m^-2 h^-1 under 1 sun irradiation. The results showed that Solar membrane steam evaporation can effectively harvest pure water through an increase in evaporation.

• Nuclear industry
• /
• v.16 no.2 s.156
• /
• pp.47-55
• /
• 1996

원자력발전소 2차 계통수중의 용존산소는 증기발생기 뿐만 아니라 터빈 급수가열기와 응축기 등 주요설비 부식의 직접적인 원인으로서, 원자력발전의 경제성 저하 및 원전설비의 안전성에 심각한 문제를 야기시키고 있다. 한국정수공업(주)는 최근 $\ulcorner$촉매수지식 용존산소 제거설비$\lrcorner$를 한국원자력연구소의 기술지원 아래 연구$\cdot$개발하여 고리원자력 1호기에 설치$\cdot$운용중에 있다. 그 개발경위와 활용전망 등을 알아본다.

• Journal of the Korean Recycled Construction Resources Institute
• /
• v.4 no.1
• /
• pp.1-9
• /
• 2016

While the amount of construction waste has not been changed much in discharge for last 10 years, the recycled resources refined from construction waste have been mainly applied to low-leveled one such as reclamation, back-fill, road base or subbase and so on. Thus this study addresses the applicability of recycled fine aggregate as a replaceable material in precast concrete. To evaluate the possibility, both of dry and wet processes were adopted as well as steam curing, widely used in the field for rapid producing. Most important experimental parameters were driven through preliminary experiments and were evaluated in terms of concrete properties. It is found from aggregate-replacement tests that all of consistency and strengths of concrete were decreased as the ratio of recycled fine aggregate increased, and the amount of decrease can be estimated using proposed equations. Though the recycled fine aggregate showed a decrease of concrete properties more or less, the applicability in large volume as a constituent of precast product was well noted from experimental results.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2010.08a
• /
• pp.50-50
• /
• 2010

Seebeck 효과를 이용한 열발전 소자는 에너지 절약에 대한 사회적인 필요성이 크게 대두됨에 따라 산업폐열 등 저급의 열에너지를 이용한 발전과 무인 작동이 가능하다는 점에서 군사 의료용 및 인공위성의 보조전원의 특수 목적용 전원등으로 사용하고 있다. 또한 Peltier 효과를 이용한 열전냉각 소자는 전자 광학기의 냉각 및 항온유지 등에 이용되고 있다. 이러한 열전소자 중 Bismuth Telluride계 열전소자는 상온부근에서 작동효율이 우수한 것으로, 단결정 또는 소결재를 이용하고 있다. 박막형 열전재료 및 이를 이용한 열전박막소자의 제조와 특성에 관한 연구가 활발히 진행되고 있다. 본 연구에서는 Bi-Te계 열전박막을 기상 증착법으로 제조하였고, 이에 사용되는 다양한 전구체 ($Bi(Me)_3$, $Bi(Et)_3$, $Te(iPr)_2$, $Te(Et)_2$, $Te(t-Bu)_2$)에 대한 증기압, 순도 측정 및 기상 분해특성 평가를 진행하였다. 전구체의 증기압 및 순도 측정을 위해선 자체적으로 제작한 시스템을 활용하였고, 기상 분해특성 평가를 위해선 특별히 제작된 플라즈마 열처리 모듈을 활용하였다. 이러한 연구는 열전박막소자의 제조를 위한 전구체의 선별조건을 제시하는데 기여할 수 있을 것으로 생각된다.

• Journal of Energy Engineering
• /
• v.9 no.4
• /
• pp.358-365
• /
• 2000

본 연구에서는 수직 단일관에서의 재관수(reflux) 응축 현상에서 증기유량이 역류제한치보다 큰 경우에 발생하는 다양한 유동 패턴을 예측하고, 그 동적 특성을 해석하기 위한 모델을 개발하였다. 특히 L/D가 큰 재관수 응축기에서 발생하는 충전 방출 모드에서의 동적 특성을 예측하는 것이 목표이다. 응축기의 내부를 액체와 증기의 두 영역으로 나누어 질량, 에너지, 운동량 보존에 입각한 본 모델은, 형성된 물기둥의 진동시 갈래질 경계(bifurcation boundary)와 진동주기를 예측할 수 있다. 이 모델은 McMaster 대학에서 수행한 실험결과와 비교한 결과 양호한 예측을 했고, 튜브 직경변화 효과를 잘 묘사하였다. 이러한 단순 모델은 재관수 응축기의 설계시에 설계변수를 도출하는데 사용될 수 있고, 인위적으로 부여한 압력펄스를 이용하여 재관수 응축기의 운전영역을 개선하는데 기초로 활용될 수 있다.

• Proceedings of the Korean Nuclear Society Conference
• /
• 1995.05a
• /
• pp.741-746
• /
• 1995

일체형원자로는 노심, 증기발생기, 가압기, 펌프 등 1차측 주기기들을 하나의 압력용기 안에 모두 포함하고 있고 또 1차측 냉각재가 원자로 안에서만 순환하므로 기존의 분리 형에 비해 구조특성상 상당히 다른 설계개념이 필요하다. 본 연구에서 개발중에 있는 일체형 열병합원자로에서 채택한 설계개념은, 먼저 증기발생기는 많은 수의 전열관들이 나사선처럼 노심지지원통을 감고 올라가는 일체형 관류식 나선형을 사용하였으며, CEDM은 지진하중과 같은 동적하중에 의한 영향을 최소화하기 위하여 원자로용기 외부로의 돌출부분을 최소화하는 설계개념을 채택하였다. 또한 가압기는 별도의 부품없이 원자로용기 헤드의 빈공간을 활용한 자기가압방식으로 대체하였고 냉각재 펑프는 Canned Motor Pump를 원자로벽에 직접 부착하는 개념을 사용하였다. 본 논문에서는 예비개념설계된 일체형 신형원자로의 기계구조설계상의 특징들을 설명하고 앞으로의 연구방향을 간략히 소개한다.

• Journal of Nuclear Fuel Cycle and Waste Technology(JNFCWT)
• /
• v.12 no.3
• /
• pp.179-189
• /
• 2014

Pyroprocessing has been developed for the purpose of resolving the current spent nuclear fuel management issue and enhancing the recycle of valuable resources. An electrolytic reduction of the pyroprocessing is a process to reduce oxides into metals using LiCl as an electrolyte and requires a post-treatment process due to the inclusion of residual salt in porous metal products. A vacuum distillation has been adopted for various molten salt systems and could be applied to the post-treatment process of the electrolytic reduction. The residual salt in the metal products includes LiCl, alkali chlorides, and alkaline earth chlorides. In this paper, vapor pressures of chlorides have been estimated and the composition changes on the residual liquid during the vacuum distillation process have been calculated. A model combining a material balance and vapor-liquid equilibrium relations has been proposed under a constant vapor discharging flow rate and liquid composition changes have been calculated using the vapor pressures with respect to a dimensionless time. The behaviors have been compared with temperature and molten salt composition changes to simulate the process condition variation. The distillation of the residual salt has been dominated by LiCl which is the main component of the salt and CsCl of which vapor pressure is higher than that of LiCl would be readily removed. RbCl exhibits similar vapor pressure with LiCl and maintains its composition. However, $SrCl_2$ and $BaCl_2$ of which vapor pressures are much lower than that of LiCl are concentrated with time and expected to be possibly precipitated during the distillation when the initial compositions are increased.

• Korean journal of food and cookery science
• /
• v.29 no.4
• /
• pp.387-398
• /
• 2013

Seasoned soy sauce is one of the popular seasoning sauces added to the Korean traditional foods such as Bulgogi, Galbi. However, industrially processed sauces have poor sensory quality because of heating treatment for sterilization. The purpose of this study was to develop seasoned soy sauce having fresh taste and good quality by applying superheated steam (SHS) and high hydrostatic pressure (HHP) technologies. To maintenance the sauce qualities, food materials such as apple, onion, and garlic were pretreated with SHS (heater $100^{\circ}C$, steam $280^{\circ}C$, 30 s~1 min 30 s) before mixing with other ingredients. During storage of 7 days, color, pH, and browning potential of SHS treated samples (apple, onion and garlic) did not change and also polyphenol oxidase was inactivated (p<0.05). The seasoned soy sauce including SHS treated materials was sterilized by thermal process ($85^{\circ}C$, 30min) or non-thermal process, HHP (550 MPa, $5{\sim}10^{\circ}C$, 3 min). In SHS+HHP treated sauce, salinity, sugar contents, lightness, viscosity did not change (p<0.05), and total viable cell counts were detected below 4 log cycle at $5^{\circ}C$ for 30 days. E.coli and B.cereus are not determined in all samples. In sensory evaluation, Bulgogi prepared with SHS+HHP treated sauce was more acceptable than others.

• Journal of the Korean Society for Nondestructive Testing
• /
• v.28 no.2
• /
• pp.184-190
• /
• 2008

Various ECT techniques have been applied basically to assess the integrity of steam generator tithing in nuclear power plant. Among these techniques, the bobbin probe technique is applied generally to examine the volumetric flaws such as a crack-like defect and wear which is generally occurred on steam generator tubing, and additionally MRPC probe is used to examine closely tile top of tubesheet and bending regions due to the high possibility of cracking. Dent and bulge also may be formed on tube during installation process and operation of steam generator, but the dent and bulge indications greater than specific size criteria are recorded on examination report because these indications are not considered as flaw. These indications can be easily detected with bobbin probe and approximately sized with profile bobbin probe, but the size and shape can not be accurately verified. Accordingly, in this study, the $8{\times}1$ multi-array EC probe was designed to increase the measurement accuracy of the sectional profiling EC testing of tube. As a result, we would like to propose the application of $8{\times}1$ multi-array EC probe for the measurement of size and shape of profile change on steam generator tube in OPR-1000 nuclear power plant.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.10 no.11
• /
• pp.3253-3259
• /
• 2009

In this study, a computer simulation has been performed for the refrigeration cycle using mixed refrigerants in order to decrease the process stream temperature to $-20^{\circ}C$. Refrigerant supply temperature was assumed to be $-30^{\circ}C$ considering the temperature difference as $10^{\circ}C$ with process stream. Peng-Robinson equation of state model was selected for the computer simulation. A new alpha function proposed by Twu et al was used for an accurate prediction of pure component vapor pressure experimental data. One fluid mixing rules were used for the estimation of mixture vapor-liquid equilibria calculations. A commercial process simulator, PRO/II with PROVISION was utilized for the simulation of the overall refrigeration process. In order to minimize the compressor power consumption, we have optimized the two-stage compression system by varying the first stage compressor outlet pressure. Finally, we could obtain the minimum total power 755.7kW at the first stage compressor outlet pressure, 6 bar.