• The Journal of Korean Academy of Prosthodontics
• /
• v.46 no.4
• /
• pp.372-380
• /
• 2008

Purpose: The purpose of this study was to evaluate the effect of various methods of dentin bonding agent application on microtensile bond strength between dentin and resin, using a 2-step etch-and-rinse dentin bonding agent. Material and methods: Twenty freshly extracted human molars were obtained and divided into 4 groups of 5 teeth. 2-step etch-and-rinse dentin bonding agent was used for all groups. The control specimens were prepared using a direct immediate bonding technique. The delayed dentin sealing (A, C) specimens were prepared using an indirect approach with delayed dentin sealing. For group A, resin was built-up on uncured dentin bonding agent, and for group C, resin was built-up on pre-cured dentin bonding agent. Preparation of the immediate dentin sealing (B) specimens also used an indirect approach with immediate dentin sealing immediately following preparation. All teeth were prepared for a microtensile bond strength test. Specimens were stored in water for 24 hours. Ten beams (1.0 ${\times}$ 1.0 ${\times}$ 11 mm) from each tooth were selected for testing. Bond strength data (MPa) were analyzed with a one-way ANOVA test, and post hoc comparison was done using the Scheffe's test. Results: The mean microtensile bond strengths of control group, B and C (DDS with pre-cure) were not statisticaaly different from each other at 32.7, 33.3, 34.2 MPa. the bond strength for group A (DDS without pre-cure), 19.5 MPa, was statistically different (P < .01) from the other 3 groups. Conclusion: When preparing teeth for indirect bonded restorations, DDS with pre-curing dentin bonding agent and IDS results in the same bond strength between dentin and resin. On the contrast, the bond strength was decreased when DDS without pre-curing dentin bonding agent was used.

• Korean Chemical Engineering Research
• /
• v.54 no.6
• /
• pp.863-870
• /
• 2016

We investigated the physical/chemical phenomena that a slow loss of $CO_2$ inventory into sodium after the sodium-$CO_2$ boundary failure in printed circuit heat exchangers (PCHEs), which is considered for the supercritical $CO_2$ Brayton cycle power conversion system of a sodium-cooled fast reactor (SFR). The first phenomenon is plugging inside narrow sodium channels by micro cracks and the other one is damage propagation referred to as wastage combined with the corrosion/erosion effect. Experimental results of plugging shows that sodium flow immediately stopped as $CO_2$ was injected through the nozzle at $300{\sim}400^{\circ}C$ in 3 mmID sodium channels, whereas sodium flow stopped about 60 min after $CO_2$ injection in 5 mmID sodium channels. These results imply that if pressure boundary of sodium-$CO_2$ fails a narrow sodium channel would be plugged by reaction products in a short time whereas a relatively wider sodium channel would be plugged with higher concentration of reaction products. Wastage by the erosion effect of $CO_2$ (200~250 bar) hardly occurred regardless of the kinds of materials (stainless steel 316, Inconel 600, and 9Cr-1Mo steel), temperature ($400{\sim}500^{\circ}C$), or the diameter of the $CO_2$ nozzle (0.2~0.8 mm). Velocities at the $CO_2$ nozzle were specified as Mach 0.4~0.7. Our experimental results are expected to be used for determining the design parameters of PCHEs for their safeties.

• Fire Science and Engineering
• /
• v.31 no.1
• /
• pp.10-17
• /
• 2017

Securing fire safety using only fire-fighting facilities is difficult because causes of modern fire vary, such as architectural structures and building use patterns. In order for fire safety to be guaranteed by enacting and revising fire regulations reflecting the fire hazard characteristics and user's characteristics, the introduction of fire influence evaluation (fire risk assessment) system needs to be considered in a timely manner to be adopted but unfortunately two attempts before have failed. In this study, a fire case of urban lifestyle housing was surveyed to introduce a fire influence evaluation system and a field survey on the actual condition of the 414 urban lifestyle housing buildings and fire & evacuation simulation results of one representative building in Suyoung-gu and Nam-gu District of Busan Metropolitan City were analyzed. The necessity, procedures and implementation method of fire influence evaluation system were questioned and tested by the professional fire experts, fire officers and firefighters and architects. On the basis of these facts, introduction of (fire influence evaluation system) should be absolutely adopted and the fire department and fire regulation are eligible to implement the system. Therefore, fire regulation needs to be enacted or revised in accordance with the new fire environment and fire safety system that needs to be built up. Accordingly, aggressive promotion through public hearings on the necessity of fire impact assessments, consensus among departments and fostering experts to carry out fire influence evaluation system will be the core.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.39B no.9
• /
• pp.598-605
• /
• 2014

In this paper, we suggest a modified slotted ALOHA algorithm for fast tag collection in active RFID system and implement the reader and tag operation using CC2530 chip of Texas Instruments Co. to prove the performance of the proposed algorithm. In the present international standard related with active RFID including ISO/IEC 18000-7 the reader sends sleep command to each tag after successful obtaining tag's information. Meanwhile, in this paper, the tags decide to sleep after checking the second command from the reader resulting in enormously decreased tag collection time. We tested the proposed algorithm with 30 tags over the range of 0-3m and the results showed that the tag collection process was completed in 400msec at average. And 30 tags are collected in one second with 99.7% and the collection rate is 100% in 2m distance between reader and tag. The collection rates are 99.94% and 99.7% for distance 2.5m and 3m, respectively. The average collection rate is 99.91% over all range and it is concluded that the proposed algorithm is enough to apply to real fields.

• Proceedings of the Korea Institute of Convergence Signal Processing
• /
• 2005.11a
• /
• pp.268-273
• /
• 2005

기존의 텔레메틱스 서비스는 교통정보안내 및 생활정보 등의 차량 내에서의 서비스 위주로 제공한다. 그러나 차량 밖에 사용자가 있을 때 사용자가 차량의 상태 및 기타 정보를 확인하고 제어 하는 서비스의 초기단계로 전화연결 서비스(원격진단, 원격 문열림, 도난차량 추적, 내차위치확인)가 있다. 이 서비스는 중앙센터의 안내원 연결을 통하여 사용자에게 차량의 상태 및 제어를 할 수 있는 시스템이다. 본 연구는 안내원 연결을 통하지 않고 VXML을 이용하여 인간과 자동차의 인터페이스를 제공한다. VXML기술은 전화 사용자의 필요한 정보의 요구를 음성인식하며 차량으로부터의 정보는 음성합성에 의해 말로써 사용자에게 전달된다. 구현된 기술은 주차한 차량의 상태를 사용자가 궁금할 때 언제나 직접 가보지 않고 전화로 확인가능하게 함으로써 사용자의 시간적 손실을 줄인다. 또한, 주차한 차량의 훼손이나 침입 여부를 즉시 SMS로 사용자에게 알려 대처 하도록 하였다. 10인의 피실험자가 각각 10번씩 모두 100번을 실험한 결과 응답시간이 3초 이내로 나타났고 100%의 동작 성공률을 보였다. 자동차 이용자의 차량 정보 및 서비스 이용에 편리성을 제공하고, 정보 단말기와 전화 사용자 간에 VXML을 이용한 인터페이스 기술 확보 및 무한한 잠재력을 가지고 있는 지능형 자동차의 시장에 기여할 것으로 예상된다.

• Journal of KIISE:Computer Systems and Theory
• /
• v.34 no.8
• /
• pp.348-366
• /
• 2007

Capacity of modem storage devices is becoming larger than yesterday and integration of disk is increasing. It refers that physical errors can damage a lot of digital information on storage devices. So we propose file system test framework in this paper to test integrity and robustness of file systems. We develop the tool for generating bad sectors on disks and the tool which creates all physical errors defined in storage devices. We also develop the tool for immediately monitoring the condition of read and write execution on storage devices. So, by integrating those tools, we develop FORT, test framework for confirming robustness of file system. We analyze robustness of ext3 file systems by FORT. Lastly, we present draft of intelligent system merging file system and device driver's layer architecture.

• Journal of Digital Convergence
• /
• v.16 no.9
• /
• pp.383-390
• /
• 2018

The purpose of this study is to find out how the evolution of digital play in virtualization and digital play tools are combined with and stereotyping the properties of traditional play. Virtualization characteristics and play theory were examined and the case was derived in four types and analyzed in four play properties with Roser Cailliois. In the case of Agon, the targets of mutual competition are expanded to singular and plural, computer and oneself of the future, and Mimicry showed the ambiguity of the segments and boundaries crossing the on-off line boundary, and in the case of Alea, the diversity of accident occurrence by immediacy and simultaneity has been strengthened, and in the case of Ilinx, the maximization of immersion has been developed and experimented with a variety of techniques for the utilization of senses and tools and the virtuality for this. As a result, play is developing due to the tendency to expand and coexist in time and space by various fusion combinations.

• Journal of the Korea Convergence Society
• /
• v.8 no.8
• /
• pp.59-69
• /
• 2017

Humanities and social sciences researchers and database experts have teamed up to build a database of IPR materials prepared by the Institute of Pacific Relations (IPR). This paper presents the issues and solutions inherent in the database construction for ensuring the quality of IPR materials. For the accessibility of the database, we maintain the database on the Web so that researchers can access it via web browsers; for the convenience of the database construction, we provide an integrated interface that allows researchers to perform all tasks in it; for the completeness of IPR materials constructed, we support the responsible input and the responsible approval that identify responsibilities of each IPR material entered; and for the immediacy of the approval, we support an interactive approval process facilitating the input of researchers. We also use database design, query processing, transaction management, and search and sorting techniques to ensure the correctness of IPR materials entered. In particular, through concurrency control using existence dependency relationships between records, we ensure the correctness between the operating system files and their paths. Our future studies include content search, database download and upload, and copyright related work on IPR materials.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.38B no.8
• /
• pp.679-686
• /
• 2013

Power efficiency becomes more important in wireless LANs as the mobile stations send more data with limited batteries. It has been known that the IEEE 802.11 PSM is not efficient in high load networks: AP cannot deliver buffered packets to a PS station immediately and it can lead the station to stay in active state quite long and result in energy waste. Moreover, it is inefficient that only one data frame is retrieved by a PS-POLL frame. In this paper, we propose a time slotted scheme to enhance the PSM, in which a mobile station can reserve time slots to receive data frames. Our mechanism can reduce collisions by reservation and decrease the channel occupancy by transmitting multiple data frames via one PS-POLL. The analytic model and simulation results show that proposed scheme reduces power consumption significantly and enhances the performance of PSM.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.38 no.6
• /
• pp.637-647
• /
• 2014

In pressurized water reactors, the upper head of the reactor pressure vessel (RPV) contains numerous control rod drive mechanism (CRDM) nozzles. These nozzles are fabricated by welding after being inserted into the RPV head with a room temperature shrink fit. The tensile residual stresses caused by this welding are a major factor in primary water stress corrosion cracking (PWSCC). Over the last 15 years, the incidences of cracking in alloy 600 CRDM nozzles have increased significantly. These cracks are caused by PWSCC and have been shown to be driven by the welding residual stresses and operational stresses in the weld region. Various measures are being sought to overcome these problems. The defects resulting from the welding process are often the cause of PWSCC acceleration. Therefore, any weld defects found in the RPV manufacturing process are immediately repaired by repair welding. Detailed finite-element simulations for the Korea Nuclear Reactor Pressure Vessel were conducted in order to predict the magnitudes of the repair weld residual stresses in the tube materials.