• Journal of the Korean Chemical Society
• /
• v.27 no.1
• /
• pp.66-72
• /
• 1983

Anionic polymerization of 2-pyrrolidone was carried out by TDI (Toluene Diisocyanate)/KOH catalysis. The effects of TDI / KOH mole ratio, KOH concentration, temperature and time on polymerization were investigated. It was observed that the highest rate of polymerization and maximum conversion were obtained when TDI / KOH mole ratio was about 0.25. The maximum conversion and the highest viscosity were obtained when the concentration of KOH was 5 mole percent. It was also found that the rate of polymerization and inherent viscosity at $30^{\circ}C$ were higher than those at $50^{\circ}C$. The rate constant ($k_p$) of polymerization was determined by least square method; the values of kp obtained were $57.53{\ell}/mole{\cdot}min\;at\;30^{\circ}C$ and $52.36{\ell}/mole{\cdot}min\;at\;50^{\circ}C$, respectively.

• Applied Chemistry for Engineering
• /
• v.3 no.1
• /
• pp.172-178
• /
• 1992

The graft copolymerization of acrylonitrile(AN) onto chitosan film by using $F^{3+}(FeCl_3{\cdot}6H_2O)$ as a photosensitizer in an aqueous medium was carried out under ultraviolet(UV) irradiation. The grafted copolymer was identified by using IR spectroscopy and scanning electron microscope. The effects of various polymerization parameters involving monomer concentration, photosensitizer concentration, polymerization time and polymerization temperature were investigated. As monomer concentration and photosensitizer concentration were increased, the percent grafting was increased up to limiting value. And also the percent grafting was found to increase by increasing the polymerization time and temperature.

• Journal of the Korean Chemical Society
• /
• v.20 no.2
• /
• pp.158-165
• /
• 1976

The anionic polymerization of ${\varepsilon}$-caprolactam with N,N'-adipyl-bis-${\varepsilon}$-caprolactam as an initiator and potassium hydroxide as a catalyst was studied under various conditions.It was found that concentration of catalyst and initiator was 4.2 and 1.6 mole %, and polymerization temperature of 130$^{\circ}C$C, polymerization time of 1.5 hours was the optimum condition. The intrinsic viscosity and molecular weight of the obtained polymer was over 0.9 dl/g and 12,000. The polymerization was carried out in the presence of N-acyl-${\varepsilon}$-caprolactam as an initiator, it was observed that the reactivity of N,N'-adipyl-bis-${\varepsilon}$-caprolactam was greater than both of the N-benzoyl-${\varepsilon}$-caprolactam and N-acetyl-${\varepsilon}$-caprolactam. In general it was also observed that the intrinsic viscosity and yield of conversion was increased as an increasing of concentration of catalyst and initiator and also highly depend on temperature.

• Applied Chemistry for Engineering
• /
• v.19 no.3
• /
• pp.345-350
• /
• 2008

Polymer Impregnated Concrete (PIC) prepared from Ordinary Portland Cement Concrete (OPC) has excellent mechanical properties as well as physico-chemical properties. For the manufacturing of PIC, drying process of basis concrete (precast concrete), impregnation process with evacuation system and ultrasonic vibration system, polymerization process of monomers are essential. Modified microwave reactor using magnetron was used for polymerization of styrene/MMA (1 : 1) impregnated in pore volume of basis concrete. From the experimental results, the degree of polymerization increased up to 30% and more homogeneous PIC was prepared as compared to the conventional thermal method. Also the mechanical strengths increased more than 400% ($800{\sim}1200kg_f/cm^2$) and the resistance for corrosion to acids was improved up to 25%. AIBN and BPO as initiators for polymerization were used at the concentration less than 1%. Optimum conditions for polymerization were obtained at the frequency of microwave of 400 W and 2450 MHz, and optimum reaction temperature was $120^{\circ}C$ at an atmospheric pressure.

• Polymer(Korea)
• /
• v.28 no.3
• /
• pp.281-284
• /
• 2004

비닐 형태의 부가중합에 의해 생성된 비결정 폴리노보넨은 주사슬이 고리화합물로 이루어져 있으며, 높은 고체밀도와 유리 전이 온도를 나타내며, 낮은 유전상수를 가지는 특징이 있다. 광학적으로 폴리노보넨은 낮은 투과손실을 가지고 있는데, 광통신 대역인 850 nm에서 삽입 손실이 0.1 dB/cm이고, 복굴절이 0.001을 나타내어 광결합 소자 및 광소자에 응용이 기대된다. 이는 주사슬의 고리화합물에 의해 결정화되지 않아, 유리 전이 온도가 28$0^{\circ}C$로 높으면서 비결정의 투명성을 가지기 때문이다.

• Polymer(Korea)
• /
• v.30 no.1
• /
• pp.28-34
• /
• 2006

A series of methoxypoly(ethylene glycol) $(MPEG)-poly(\varepsilon-co-L-lactide)$ (PCLA) diblock copolymers were synthesized by ring-opening polymerization of a mixture of $\varepsilon-caprolactone$ and L-lactide with different ratios in the presence of $Sn(Oct)_2$. The characterization of MPEG-PCLA diblock copolymers were examined by $^1H-NMR$, GPC, DSC, and XRD. Kinetic study on ring-opening polymerization of monomer mixtures was carried out in various conditions such as a variation with polymerization time, amount of catalyst, and temperature. The highest conversion obtained in 1.2 ratic of initiator venn catalyst at $110\;^{\circ}C$. The biodegradable characterization of MPEG-PCLA diblock copolymers in aqueous solution was carried out by using GPC for $1\~14$ weeks. The biodegradability of MPEG-PCLA diblock copolymers increased as the L-lactide content of diblock copolymers increased. In conclusion, we confirmed the dependence of polymerization rate according to various conditions. In addition, we can control the biodegradability of MPEC-PCLA diblock copolymers by changing the ratio of PCL and PLA block segment.

• Korean Chemical Engineering Research
• /
• v.48 no.2
• /
• pp.212-217
• /
• 2010

In this study, suspension polymerized toners were prepared by using poly(vinyl alcohol)(PVA) as an organic suspending agent. Styrene and butylacrylate monomers were used simultaneously with carbon black to prepare microspherical polymerized toners with a narrow-particle size distribution. Preliminary particles without carbon black were polymerized first to optimize suspension polymerization conditions. The preliminary particles were prepared at various polymerization conditions and their characteristics were compared to each other to determine an optimized polymerization condition. The black polymerized toner prepared at the optimized polymerization condition showed reasonable particle size and shape, and good thermal and printing characteristics by showing its glass transition temperature at $53.6^{\circ}C$.

• Polymer(Korea)
• /
• v.25 no.4
• /
• pp.460-467
• /
• 2001

Inverse suspension polymerization of acrylamide (AM) in cyclohexane was carried out to study the effects of concentrations of sorbitan ester (Span) stabilizers and 2,2'-azobis (2-methyl propionamidine) dihydrochloride (AIBA) initiator, amount of monomer, shaking speed, and polymerization temperature on the particle size of the resulting poly (acrylamide) (PAM) beads and their molecular weights. It was found that the particle diameter. in general, decreased with increasing concentration of stabilizer, shaking speed, and water content in the aqueous phase, and with decreasing concentration of initiator and polymerization temperature. The average molecular weight of the resulting PAM beads was also found to increase with increasing concentrations of monomer and stabilizer, and also with decreasing concentration of initiator, polymerization temperature, and water content in the aqueous phase. In this study, PAM beads ranging 2 ~ 50 ${\mu}$m in diameter, with 8000000 ~ 12000000 in the weight average molecular weight were successfully prepared in almost 100% conversion.

• Journal of Adhesion and Interface
• /
• v.13 no.3
• /
• pp.101-108
• /
• 2012

Narrowly dispersed poly(BMA-co-MMA) and PBMA latices (PSD : 1.002~1.008) were synthesized successfully by surfactant-free emulsion polymerization with 2,2' azobis(2-methyl-propionamidine) dihydrochloride (AIBA) and $K_2S_2O_8$ (KPS). The number average particle diameter and the number average molecule weight were found to be 160~494 nm and (1.25~7.55) ${\times}10^4$, respectively. The influences of BMA/MMA ratio, monomer and initiator concentrations, addition of DVB/EGDMA crosslink agent, and polymerization temperature on the polymerization rates and on the particle size and molecular weight were studied. The rate of polymerization increased with increasing MMA concentration in BMA/MMA weight ratio. The particle diameter as well as the polymer molecular weight could be controlled easily by controlling the BMA/MMA weight ratio, monomer concentration, AIBA and KPS concentration, and polymerization temperature.

• Applied Chemistry for Engineering
• /
• v.8 no.5
• /
• pp.844-852
• /
• 1997

In the polymerization of ethylene to produce crystalline polyethylene wax using the homogeneous titanium-based catalyst, the effects of various parameters such as catalyst, temperature, pressure, comonomer and time on the performance of catalyst and the properties of polyethylene wax were investigated. The properties of polyethylene wax obtained were characterized in terms of molecular weight, molecular weight distribution, crystallinity, density and morphology. Among the polymerization features with a series of mixed cocatalyst systems of $(C_2H_5)_3Al$, $(i-C_4H_9)_3Al$, $(C_2H_5)_2AlCl$ and $(C_2H_5)_3Al_2Cl_3$, it turned out that the combination of $(C_2H_5)_3Al$ and $(C_2H_5)_3Al_2Cl_3$ was more effective than any other combination. It was noted that the activity of catalyst and the properties of polyethylene wax were affected by the polymerization parameters, i.e. time, temperature and hydrogen partial pressure. The various kinds of crystalline polyethylene wax could be obtained by careful control of these parameters. Also we could obtain low density polyethylene wax which has density down to 0.91 g/cc by use of 1-butene as a comonomer.