• Journal of the Korea Concrete Institute
• /
• v.18 no.4 s.94
• /
• pp.569-576
• /
• 2006

PC-type copolymers were synthesized using MPEG(polyethylene glycol methyl ether methacrylate, Mn=2080) to different mole ratios of mono-carboxylic acid(AA : acylic acid). The mole ratios of AA were 2, 3, 4 and PC-type terpolymers were synthesized using mono-, dicarboxylic acid(ITA : itaconic acid MAL : maleic acid) with the same graft chain. To investigate effects of PC-type co-, ter-polymers on the hydration of cement experiments involving FT-IR, XRD, DSC, SEM have been analysed with cement paste specimens to 1, 3, 28 day. The hydration reaction rate of cement paste was slightly delayed at 1 day, due to increase in molar ratio of [AA]/[MPEG], it was recovered in the days after and the copolymer was more active than the terpolymer, because of low carboxylic acid content PC-type copolymers applied 2AA-type were fastest copolymer on hydration reaction of cement paste to 3 day and the more AA mole ratios increased, the more hydration was retarded.

• Korean Journal of Food Science and Technology
• /
• v.22 no.6
• /
• pp.640-645
• /
• 1990

Changes of the electrophoretic patterns of myofibrillar proteins by sugar audition and heat treatment was studied. In the electrophoretic patterns of myofibrills prepared from no sugar added meat, as the intensity of higher molecular weight band such as myosin heavy chain showed a remarkable decrease by heating, that of lower molecular weight band such as actin showed no change. That from sugar added meat showed more remarkable decrease in the intensity of higher molecular weight band than that from no sugar added meat and this tendency was most noticeable in case of glucose addition. The effect of digestion with proteases after sugar addition and heat treatment on the electrophoretic patterns exhibited the descending order of trypsin >chymotrypsin >peptidase. By digestion with these three enzymes at one time myosin produced 27.000 dalton and 32.000 dalton components, and actin showed 16,000 dalton component. in the case of heat treatment, a part of actin was not digested. And in the case of glucose addition the myosin aggregates was not digested with these three enzymes at a time.

• Polymer(Korea)
• /
• v.25 no.4
• /
• pp.468-475
• /
• 2001

For copolymerization of ethylene and norbornene initiated by various metallocene catalysts such as $rac-Et(Ind)_2ZrCl_2,\;rac-Me_2Si(Ind)_2ZrCl_2,\;rac-Me_2Si(Cp)_2ZrCl_2,\;and\;(n-BuCp)_2ZrCl_2$ with modified methylaluminoxane(MMAO) cocatalyst, the ${\alpha}$-olefins such as 1-hexene(H), 1-octene and 1-decene were added as a 3rd monomer. In this situation, the effects of the polymerization condition, the catalyst structure as well as the structure and the amount of added ${\alpha}$-olefin on the catalyst activity as well as the properties and structure of polymer were examined. As results, it was found that the catalyst activity and thermal property of polymer depended on not only catalyst structure but also ${\alpha}$-olefin structure. For $rac-Et(Ind)_2ZrCl_2/MMAO$ catalyst system, it was possible to get high activity and controllable $T_g$ of polymer. Among ${\alpha}$-olefins, H as a 3rd monomer exhibited the maximum enhancement in catalyst activity.

• Polymer(Korea)
• /
• v.37 no.2
• /
• pp.211-217
• /
• 2013

Potassium tert-butoxide (t-BuOK) with $CO_2$ or benzoyl chloride (BzC) as a polymerization initiator system was used with crown ether or TMAC as catalyst to synthesize very high molecular weight nylon 4 homo- and copolymers by anionic ring opening polymerization. Effect of different amounts of catalyst, crown ether and TMAC on the polymerization was studied in terms of intrinsic viscosity, yield and thermal properties. By adding crown ether or TMAC, polymers with very higher intrinsic viscosity values were obtained in a high yield. It was possible to synthesize nylon 4 homopolymer with such a high intrinsic viscosity value of 6.36 dL/g. Crown ether was found to be more efficient in terms of intrinsic viscosity and polymer yields than TMAC. Thermal analysis confirmed that molecular weight effect on the thermal properties of both nylon 4 and nylon 4 copolymer was marginal.

• Korean Journal of Food Science and Technology
• /
• v.29 no.5
• /
• pp.860-868
• /
• 1997

The effects of oil unsaponifiables (8 species) and methanolic plant extracts (53 species) on the thermal oxidation of oils during 14 or 16 hour heating at $180^{\circ}C$ were studied by analyzing the fatty acid composition of soybean oil or cottonseed oil. All the unsaponifiables tested did not show any antioxidative activities on the thermal oxidation of soybean oil. However, among the 53 species of methanolic plant extracts, some species (Rheum undulatum L., Chelidonium majus L. var. asiaticum and Eugennia caryopyllata T.) showed very strong antioxidative activities on the thermal oxidation of cottonseed oil. The antioxidative activities of methanolic extracts of these 3 species on thermal oxidation of cottonseed oil during an extended heating period were also studied by heating cottonseed oils for 7 hours a day for 8 days at $180^{\circ}C$. The methanolic extracts of Chelidonium majus L. v. asiaticum and Eugennia caryopyllata T. greatly reduced both polymer formation and linoleic acid decomposition after the 8 day heating at $180^{\circ}C$. However, the methanolic extracts of Rheum undulatum L. was effective for the reduction of polymer formation, but not for the reduction of linoleic acid decomposition.

• Journal of the Korean Chemical Society
• /
• v.18 no.5
• /
• pp.381-388
• /
• 1974

When mixture of p-phenylenediamine (PPD) and m-aminophenol (MAP) were reacted with formaldehyde (F) varying their amounts under $N_2$ stream at the temperature of -5∼0$^{\circ}$, addition condensation reaction occurred and brown colored resins(in some cases orange colored) were formed immediately. All resins thus formed were insoluble in most ordinary organic solvents and did not melt up to 300$^{\circ}$. When the resins were treated with dilute(7 %) aqueous sodium hydroxide solution, the adsorptivity of methylene blue on them showed marked improvement reaching as much as 80 mg of methylene blue on 1 g of the resin. On the other hand, in the case of bromophenol blue, its amount of adsorption appeared 250 mg per 1 g of the resin. The TGA under $N_2$ atmosphere indicated that the resin formed in molar ratio of 1 : 3 : 8 (PPD : MAP : F) showed the best heat-resistant property among others. About 40 % weight loss was observed for this resin at 900$^{\circ}$ with heating rate of 2$^{\circ}$ per minute.

• Journal of the Society of Disaster Information
• /
• v.19 no.2
• /
• pp.292-304
• /
• 2023

Purpose: This study was conducted to obtain experimental data for the establishment of preventive measures against fire, as large and small fire accidents occur at production and storage sites of superabsorbent polymers developed for the convenience of daily life. Method: The sample container was fixed at 0.2m in both length and width, and was shaped into a rectangular cuboid with heights of 3cm, 5cm, 7cm, and 14cm to access an infinite flat plane. The sample container was fixed in the center of a thermostatic bath that was heated to a predetermined temperature according to a preset temperature control program. If the central temperature of the sample rose more than 20℃ above the set temperature, it was determined to have 'ignited', and if it remained similar to the set temperature, it was determined to have 'unignited'. Result: The critical autoignition temperature was calculated to be 212.5℃ for a sample container with a height of 3cm, 202.5℃ for 5cm, 192.5℃ for 7cm, and 177.5℃ for 14cm. The ignition induction time to reach the highest temperature was approximately 42hours for 3cm, 91hours for 5cm, 151hours for 7cm, and 300hours for 14cm. Conclusion:① As the size of the sample container increased, the autoignition temperature decreased and the ignition induction time to reach the highest temperature increased. ② The apparent activation energy was calculated to be 39.30kcal/mol, with a correlation of 99.5%.

• YAKHAK HOEJI
• /
• v.30 no.5
• /
• pp.232-237
• /
• 1986

A series of modified poly(acrylic acid)'s containing different levels of 6-aminopenicillanic acid (6-APA), 7-aminocephalosporanic acid (7-ACA) and 6-[D-(-)-$\alpha$-aminophenyl acetamido] penicillanic acid (ampicillin) as pendant groups were prepared. Antibiotic activities of the newly prepared drugs were examined against the various gram-positive and gram-negative bacteria. It was found that ampicillin modified composition posses antibiotic activities against the gram-negative as well as the gram-positive bacteria.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2013.05a
• /
• pp.1549-1550
• /
• 2013

• Proceedings of the Korean Society of Rheology Conference
• /
• 2002.11a
• /
• pp.77-80
• /
• 2002

No Abstract, See Full Text