• 한국신재생에너지학회:학술대회논문집
• /
• 2008.05a
• /
• pp.445-447
• /
• 2008

본 연구에서는 다중벽 탄소나노튜브용 표면개질제를 리빙라디칼중합법을 통하여 제조하고, 이를 이용하여 표면개질되고 분산제어된 다중벽탄소나노튜브를 제조하고 염료감응형 태양전지의 대전극 재료로 사용하였다. 우선 리빙라디칼중합법 중 nitroxide mediated polymerization (NMP) 기술을 이용하여 poly(maleic anhydride-co-p-acetoxystyrene)-block-poly(p-acetoxystyrene)를 합성하고, 공중합체중의 maleic anhydride기에 이미드화 반응을 통하여 pyrene기를 도입하였다. 공중합체 중의 p-acetoxystyrene 반복단위들은 가수분해 반응을 통하여 p-hydroxystyrene 반복단위로 변환하였으며, 제조된 공중합체의 구조와 열 특성 등을 GPC, GC, $^1H$-NMR, TGA을 통하여 분석하였다. 제조된 공중합체를 이용하여 다중벽 탄소나노튜브의 표면을 polymer wrapping법으로 처리하였고, 표면개질된 탄소나노튜브의 분산성을 다양한 용매에서 비교분석하였다. 표면이 개질되고 페이스트 내에의 분산성이 향상된 다중벽탄소나노튜브를 염료감응태양전지의 대전극 제조에 응용하였으며, 표면처리 및 분산제어 여부에 따른 제작 특성 및 동작특성 등을 평가하였다.

• Proceedings of the Materials Research Society of Korea Conference
• /
• 2003.03a
• /
• pp.240-240
• /
• 2003

SiC 섬유의 고온강도를 향상시키기 위한 소결조제로 boron, aluminum 등을 사용할 수 있다. 본 연구에서는 폴리카보실란에 aluminum precursor를 첨가한 후 중합반응을 거쳐 Al-contained polycarbosilane을 합성하였다. 합성된 Al-contained polycarbosilane을 용융방사하여 섬유화 하고 열분해 공정을 통해 Si-Al-C-O 나노복합 섬유를 제조하였다. 먼저 aluminum butoxide와 polycarbosilane(commercial)을 200m1 xylene에 용해시켜 14$0^{\circ}C$에서 1시간 동안 reflux하였다. evaporator를 이용하여 xylene를 제거한 후 autoclave에서 25$0^{\circ}C$/30$0^{\circ}C$ 중합과정을 통해 가교결합 시켰다 이와 같이 합성된 시료는 ICP분석을 통해 aluminum 함량을 확인하였고 FT-IR(Fig.1) 및 GPC분석(Fig.2)으로부터 화학구조 및 분자량변화를 확인하였다. aluminum 첨가량이 증가함에 따라 Si-H/Si-$CH_3$의 결합크기의 비가 감소하였으며 이로부터 aluminum butoxide와 polycarbosilane의 가교결합이 이루어진 것으로 보이며 중합 후 분자량의 증가 또한 가교결합에 의한 결과로 사료된다 열무게감량(TGA) 측정 결과는 40$0^{\circ}C$부터 유기리간드의 분해가 일어나며 80$0^{\circ}C$이상에서 세라믹화 과정이 완료되었음을 알 수 있었다 또한 aluminum 첨가량이 증가함에 따라 세라믹 수율도 증가하였음을 확인하였다. 합성된 aluminum-contained polycarbosilane은 20$0^{\circ}C$에서 1시간 동안 불융화과정을 거쳐 환원 및 진공 분위기에서 고온 열처리하였으며 이로부터 얻어진 시료에 대해 XRD분석을 수행하였다. SEM과 TEM을 이용하여 미세구조를 관찰하였다.

• Applied Chemistry for Engineering
• /
• v.20 no.1
• /
• pp.75-79
• /
• 2009

The ratio of aniline dimer (p-aminodiphenylamine), which is a nucleation site of chain growth in a chemical polymerization of aniline monomer, to aniline monomer was controlled to synthesize polyaniline with the molecular weight ($M_w$) between 10000 and 20000 g/mol. The result of OCP measurement showed that the reaction rate of polymerization was increased as the mole ratio of dimer was increased. The increase in the molar ratio of dimer resulted in the shift of absorption wavelength of polyaniline to the short wavelength region on measurement of UV/Vis and the decrease of molecular weight on the measurement of GPC.

• Polymer(Korea)
• /
• v.24 no.3
• /
• pp.306-313
• /
• 2000

Polycaprolactone (PCL) macromer containing terminal methacrylate group was synthesized by ring-opening polymerization. The number average molecular weight of PCL macromer was 11600 g/mole and polydispersity index was 1.09. The synthesized PCL macromer was copolymerized with styrene by stable free radical polymerization using 2,2,6,6-tetramethyl-1-piperidinyloxy (TEMPO), benzoyl peroxide, and well-defined poly(styrene-g-caprolactone)s were synthesized. The synthesized copolymers was characterized by $^1$H-NMR and gel permeation chromatography equipped with multiangle laser light scattering detector. Thermal properties of graft copolymers were investigated by DSC.

• Restorative Dentistry and Endodontics
• /
• v.34 no.4
• /
• pp.333-339
• /
• 2009

This study was done to determine if there is any difference in microleakage between experimental composite resins, in which various proportions of three component photoinitiators (Camphoroquinone, OPPI, Amine) were included. Four kinds of experimental composite resin were made by mixing 3.2% silanated barium glass (78 wt.%, average size; 1 ${\mu}m$) with each monomer system including variously proportioned photoinitiator systems used for photoinitiating BisGMA/BisEMA/TEGDMA monomer blend (37.5:37.5:25 wt.%). The weight percentage of each component were as follows (in sequence Camphoroquinone, OPPI, Amine): Group A - 0.5%, 0%, 1% / Group B - 2%, 0.2%, 2% / Group C - 0.2%, 1%, 0.2% / Group D - 1%, 1%, 2%. Each composite resin was used as a filling material for round class V cavities (diameter: 2/3 of mesiodistal width; depth: 1.5 mm) made on extracted human premolars and they were polymerized using curing light unit (XL 2500, 3M ESPE) for 40 s with an intensity of 600 mW/$cm^2$. Teeth were thermocycled fivehundred times between $50^{\circ}C$and $550^{\circ}C$for 30s at each temperature. Electrical conductivity (${\mu}A$) was recorded two times (just after thermocycling and after three-month storage in saline solution) by electrochemical method. Microleakage scores of each group according to evaluation time were as follows [Group: at first record / at second record; unit (${\mu}A$)]: A: 3.80 (0.69) / 13.22 (4.48), B: 3.42 (1.33) / 18.84 (5.53), C: 4.18 (2.55) / 28.08 (7.75), D: 4.12 (1.86) / 7.41 (3.41). Just after thermocycling, there was no difference in microleakage between groups, however, group C showed the largest score after three-month storage. Although there seems to be no difference in microleakage between groups just after thermocycling, composite resin with highly concentrated initiation system or classical design (Camphoroquinone and Amine system) would be more desirable for minimizing microleakage after three-month storage.

• The Transactions of the Korean Institute of Electrical Engineers
• /
• v.45 no.3
• /
• pp.380-385
• /
• 1996

Thin films of polyamic acid(PAA) were fabricated by vapor deposition polymerization(VDP) from pyromellitic dianhydride(PMDA) and 4,4'-diamino diphenyl ether(DDE). Thin films of polyimide(PI) were obtained by curing PAA, and their dielectric properties have been measured. The uniform thin films of PI formed by curing PAA at 300 .deg. C for 1 hr. which was confirmed by Fourier transform Infrared spectroscopy(FT-IR) absorption at 720, 1380, 1780c $m_{-1}$. Relative permittivity and tan .delta. were 3.9 and 0.008 at 10kHz, respectively. (author). 8 refs., 11 figs., 1 tab.1 tab.

• Polymer(Korea)
• /
• v.25 no.2
• /
• pp.263-269
• /
• 2001

MAPTAC-MMT was prepared by exchanging the mineral cation (sodium montmorillonite) with 3-(methacryloyl amino) propyltrimethyl ammonium chloride, thus rendering the mineral organophilic and forming polymerizable moieties directly bonded to the surface of montmorillonite (MMT). Thermoresponsive nanocomposites (PNIPAM-MMT) were synthesized by polymerization of N-isopropyl acrylamide in an aqueous suspension of MAPTAC-MMT at room temperature. Thermoresponsive nanocomposites exhibited a low critical solution temperature (LCST) similar to unmodified poly(N-isopropyl acrylamide) (PNIPAM). The LCST of thermoresponsive nanocomposites decreased in proportion to the amount of MAPTAC-MMT. TGA results showed that the thermal stability of thermoresponsive nanocomposites was improved compared to PNIPAM itself the thermoresponsive polymer.

• Polymer(Korea)
• /
• v.39 no.2
• /
• pp.346-352
• /
• 2015

Polyalphaolefin (PAO) is a synthetic lubricant that is superior to mineral-based lubricants in the terms of physical and chemical characteristics such as low pour point, high viscosity index (VI), and thermal and oxidation stability. Several kinds of PAOs have been synthesized by using 1-pentene, 1-hexene, 1-octene, or 1-dodecene as monomer with three kinds of aluminum-based Lewis acid catalysts via cationic polymerization. The control of the catalytic performance and physical properties of PAO such like molecular weight, kinematic viscosity, pour point, and viscosity index was done by changing polymerization parameters. The alkyl aluminum halide-based catalysts show better catalytic activity than that of the conventional $AlCl_3$ catalyst. The microstructure of PAO was investigated by means of TOF-MS (time of flightmass spectroscopy) analysis in order to elucidate the correlation between the performances of the lubricant (VI, pour point) and the molecular structure of PAO. The VI of PAO increases with increases in the carbon number of ${\alpha}$-olefin. In other words, the performances of PAO as a lubricant strongly depended on the branch length of PAO.

• Parasites, Hosts and Diseases
• /
• v.34 no.3
• /
• pp.191-196
• /
• 1996

Polymerase chain reaction (PCR) is a powerful technique to detect scanty amount of DNA from living organisms. The present study intended to develope specific primers for PCR diagnosis of pneumocystosis and to evaluate diagnostic efficacy by preparation of template DNAs from invasive BAk fluid and also to screen serum or blood as a non-invasive specimen. Albino rats of Wistar or Fischer strains were experimentally infected by Pneumocwstis ccrinii. Extracted DNAs or cell Iysates of their blood, bronchoalveolar lavage fluid, and lung homogenate were used as the tenlplate DNA. Primers were synthetic oligonucleotides among 16s rDNA sequences. All of the primer combinations gave PCR products, but the primer pair of #24 and #27 gave best quality product of 666 bp. The sensitivity of PCR with Iysates of BAk fluid was 57.7% but it increased to 84.6% with extracted DNAs. None of BAL Iysate or DNA was positive among 13 microscopically negatives. The serum DNAs were positive only in 2 cases out of 20 morphologically positive rats. DNAs of human, rat, other parasites, yeast, and microorganisms were negative. The findings suggest that the present primers are specific but simple Iysate of BAL fluid is not sensitive. PCR may be used as a routine diagnostic method of pneumocystosis if simple and rapid preparation of non-invasive clinical specimens are available.

• Applied Chemistry for Engineering
• /
• v.3 no.4
• /
• pp.627-638
• /
• 1992

PPG and BPA-type polyurethane prepolymers(NCO terminated) were obtained from bisphenol A and four types of PPG, having different molecular weight and numbers of functional groups. PPG and BPA-type polyurethane dimethacrylates were synthesized by reacting PPG and BPA-type polurethane prepolymer with 2-HEMA respectively. PPG-type polyurethane dimethacrylates were formulated with initiator(CHP), inhibitor(hydroquinone) and reactive diluent(TEGDMA). The effect of formulation on the torque changes was studied. Four kinds of PPG-type polyurethane dimethacrylates, having different molecular weight and numbers of functional group, were formulated with the same amount of CHP, TEGDMA and hydroquinone. The effects of the molecular weight of PPG-type polyurethane dimethacrylate and functional group numbers of PPG-type polyurethane dimethacrylates on the torque were investigated. These results showed that the torque of PPG-type polyurethane dimethacrylates, having same numbers of functional group, increased with decreasing molecular weight of dimethacrylates and torque of PPG-type polyurethane dimethacrylate, having similar molecular weight, was increased with increasing the number of fuctional group. The glass-transition temperature(Tg) of gels obtained by thermosetting cure for the four kinds of PPG-type polyurethane dimethacrylates were measured by DSC and molecular weights between cross-links(Mc) were calculated from Tg changes.