• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.40 no.9
• /
• pp.815-820
• /
• 2016

An elastic polymer (e.g., PDMS) blended with EFG particles is a promising conductive composite for fabricating soft sensors that can detect an object's deformation up to or more than 50%. Here, we develop large-strain, sprayable soft sensors using a mixture of PDMS and EFG particles, which are used as a host elastomer and electrically conductive particles, respectively. A solution for a conductive composite mixture is prepared by the microwave-assisted graphite exfoliation, followed by ultrasonication-induced fragmentation of the exfoliated graphite and ultrasonic blending of PDMS and EFG. Using the prepared solutions for composite and pure PDMS, 1-, 2-, and 3-axis soft sensors are fabricated by airbrush stencil technique where composite mixture and pure PDMS are materials for sensing and insulating layers, respectively. We characterize the soft strain sensors after investigating the effect of PDMS/EFG wt% on mechanical compliance and electrical conductance of the conductive composite.

• 한국지구물리탐사학회:학술대회논문집
• /
• 2002.09a
• /
• pp.67-84
• /
• 2002

A shallow high-resolution seismic reflection survey was carried out at the Mineopo tidal flat on the western coast of Korea. The purpose of the survey was to investigate shallow sedimentary structure of the tidal (fat associated with the recent sea level change. A total of 795 shots were generated at 1 m interval from a 5-kg hammer source and recorded on 48 channels of 100 Hz geophones along two mutually perpendicular profiles. The water-saturated ground condition resulted in suppressed ground rolls by significantly decreasing rigidity. In addition, seismic velocities over 1500 m/s provided easy segregation of reflected arrivals from lower velocity noise. As a consequence, seismic sections were created that are high in resolution and signal to noise ratio as well. The stack sections show that the tidal flat consists of 5 sedimentary sequences above acoustic basement. Although deposition is largely characterized by the transgressive sedimentary facies resulting from sea level rise, erosional surfaces are well-resolved within the sequences.

• Membrane Journal
• /
• v.19 no.4
• /
• pp.302-309
• /
• 2009

A block copolymer of polystyrene-b-poly (hydroxyl ethyl methacrylate), PS-b-PHEMA, was synthesized via atom transfer radical polymerization (ATRP) and crosslinked with 4,5-imidazole dicarboxylic acid (IDA) via esterification of the -OH groups of PHEMA in the block copolymer and the -COOH groups of IDA. Upon doping with $H_3PO_4$ to form imidazole-$H_3PO_4$ complexes, the proton conductivity of the membranes continuously increased as the content of $H_3PO_4$ increased. In addition, both the tensile strength and the elongation at break increased with IDA content. A proton conductivity of 0.01 S/cm at $100^{\circ}C$ was obtained for the PS-b-PHEMA/IDA/$H_3PO_4$ membrane with [HEMA]:[IDA]:[$H_3PO_4$] = 3:4:4 under anhydrous conditions. All of the PS-b-PHEMA/IDA/$H_3PO_4$ membranes were thermally stable up to $350^{\circ}C$, as revealed by thermal gravimetric analysis (TGA).

• Polymer(Korea)
• /
• v.29 no.5
• /
• pp.440-444
• /
• 2005

An increase in the surface area of drugs by reducing particle sizes from microns to nanometers has been known as an efficient method to improve the bioavailability of water-insoluble drugs. To prevent drug nanoparticles from aggregation during the processes of drug formulation, a limited number of pharmaceutical inactive ingredients such as hydroxypropyl cellulose has been employed as stabilizers or dispersants. In this study, copolymers of hydrophilic and hydrophobic amino acids were synthesized by the ring opening polymerization of their N-carboxyanhydride monomers and evaluated as novel candidates to stabilize the nanoparticles of a water insoluble drug, naproxen. Naproxen nanoparticles stabilized by synthesized amino acid copolymers were successfully prepared in the size of $200\~500nm$ in 60 min by a wet comminution process. Particle size analysis showed that the effective stabilization performance of copolymers required the hydrophobic moiety content to be higher than $10 mol\%$. However, the molecular weight and morphology of copolymers was not the critical parameters in determining the particle size reduction. Their particle size was found to be stable up to 14 days without significant aggregation.

• Korean Journal of Clinical Laboratory Science
• /
• v.54 no.3
• /
• pp.179-191
• /
• 2022

Carbapenem-resistant Enterobacteriaceae (CRE) poses an increasing public health threat and has limited treatment options with high associated mortality. Genotypes of carbapenemase that threaten public health (bla_KPC, bla_NDM, bla_IMP, and bla_VIM) and bla_OXA-48-like genes were detected by phenotypic and molecular diagnosis, and related gene distribution patterns were investigated. Phenotypic testing using the modified Hodge test confirmed positivity in all 41 strains examined, and carbapenemase inhibitory testing using meropenem+phenyl boronic acid or meropenem+EDTA confirmed positivity in 18 and 8 strains, respectively. Polymerase chain reaction revealed the presence of amplification products in 28 strains of bla_KPC, 25 strains of bla_NDM, 5 strains of bla_IMP, 1 strain of bla_VIM, and 13 bla_OXA-48-like strains. In addition, 7 strains of bla_KPC+bla_NDM, 1 strain of bla_KPC+bla_IMP, 1 strain of bla_NDM+bla_OXA-48-like, 1 strain of bla_NDM+bla_VIM, 4 strains of bla_KPC+bla_NDM+bla_IMP, and 4 strains of bla_KPC+bla_NDM+bla_OXA-48-like were identified. Melting curve analysis using real-time PCR was wholly consistent with PCR results. The study shows genetic identification of highly specific CRE by real-time PCR could be used to provide early diagnoses and infection control, improve surveillance, and prevent the transmission of CRE.

• Journal of Embryo Transfer
• /
• v.16 no.3
• /
• pp.203-211
• /
• 2001

This study was carried out to determine sex of porcine embryos produced by in vitro fertilization. Porcine oocyte-cumulus complexes were cultured in BSA-free North Carolina State University (NCSU) 23 medium containing porcine follicular fluid (10%), cystein (0.1 mg/ml) and hormonal supplement (10 IU eCG and 10 IU hCG per ml) for 20~22 hrs. They were then cultured in the same medium but without hormonal supplement for additional 20~22 hrs. After culture, cumulus cells were removed and oocytes were co-incubated for 6 hrs with four different concentrations (5$\times$10$^4$, 2.5$\times$ 10$^{5}$ , 5.0$\times$10$^{5}$ and l0$\times$10$^{5}$ ) of porcine sperm. After fertilization, oocytes were transferred into NCSU 23 with 0.4% BSA medium. The cleavage and blastocyst formation rates were evaluated at 48 and 144 hrs, respectively. In this study, the polymerase chain reaction (PCR) was used to determine the sex of porcine embryos in the stage of blastocyst. The PCR was performed using a set of oligonucleotide primers (5‘-TCATGGACCAGGTAGGGAAT-3', 5’-GAAAGACACGTCCTTGGA GA-3') for 491 bp fragment of porcine male-specific DNA sequence. In the flour different sperm concentration (5$\times$10$^4$, 2.5$\times$10$^{5}$ , 5.0$\times$10$^{5}$ and l0$\times$10$^{5}$ ) for fertilization condition, the cleavage rate was 55.95, 67.88, 60.18 and 47.60%, respectivety, and the development rate of blastocysts was 16.03, 20.40, 21.41 and 12.37%, respectively. At 5.0$\times$10$^4$and 2.5$\times$10$^{5}$ of sperm concentrations per ml cleavage rate and development rate of blastocyst were higher than those of 5.0$\times$10$^4$and l0$\times$10$^{5}$ of sperm concentration (P<0.01). The male of porcine embryos was detected at 491 bp by PCR, and 18 of the 31 porcine blastocysts were the male (58.1%) and the rest 13 were the female(41.9%).

• Economic and Environmental Geology
• /
• v.48 no.1
• /
• pp.25-39
• /
• 2015

$CO_2$ geological storage plays an important role in reduction of greenhouse gas emissions, but there is a lack of research for CCS demonstration. To achieve the goal of CCS, storing $CO_2$ safely and permanently in underground geological formations, it is essential to understand the characteristics of them, such as total storage capacity, stability, etc. and establish an injection strategy. We perform the impedance inversion for the seismic data acquired from the Ulleung Basin in 2012. To review the possibility of $CO_2$ storage, we also construct porosity models and extract attributes of the prospects from the seismic data. To improve the quality of seismic data, amplitude preserved processing methods, SWD(Shallow Water Demultiple), SRME(Surface Related Multiple Elimination) and Radon Demultiple, are applied. Three well log data are also analysed, and the log correlations of each well are 0.648, 0.574 and 0.342, respectively. All wells are used in building the low-frequency model to generate more robust initial model. Simultaneous pre-stack inversion is performed on all of the 2D profiles and inverted P-impedance, S-impedance and Vp/Vs ratio are generated from the inversion process. With the porosity profiles generated from the seismic inversion process, the porous and non-porous zones can be identified for the purpose of the $CO_2$ sequestration initiative. More detailed characterization of the geological storage and the simulation of $CO_2$ migration might be an essential for the CCS demonstration.

• Journal of Korean Ophthalmic Optics Society
• /
• v.20 no.4
• /
• pp.463-469
• /
• 2015

Purpose: A hydrogel including alginate and $CaCl_2$ extracted from seaweed was manufactured, and their physical properties were investigated. Also, its applicability as contact lenses was examined. Methods: A film-type sample used in this experiment was manufactured using 2-hydroxyethyl methacrylate (HEMA), which is the raw material of hydrogel contact lenses; azobisiobutyonitile (AIBN), which is an initiator and ethylenglycoldimethacrylate (EGDMA), which is a cross-linking agent. It was hydrated in a PBS solution for 24 hours, and an interpenetrating polymer network (IPN) was formed in 1% and 2% alginate and 1%, 3%, and 5% $CaCl_2$ solutions for 24 hours, respectively. Results: The measurement of the physical properties of the film after the IPN showed that the moisture content was 30.89~36.89%, the refractive index was 1.431~1.441, the contact angle was $62.98{\sim}80.45^{\circ}$, and the tensile strength was 2.378~4.215 ($gf/mm^2$). Also, the physical properties hardly changed as the content of alginate increased, and the moisture content decreased as the content of $CaCl_2$ increased. As a result of the IPN, the moisture content and contact angle decreased compared to those of basic HEMA, but the tensile strength increased. The tensile strength of the second IPN was higher than that of the first IPN. In the case of $CaCl_2$, for the sample polymerized for 24 hours and the second IPN sample with 2% alginate, the contact angle decreased as the content of $CaCl_2$ increased. Conclusions: In this study, the tensile strength increased as the content of $CaCl_2$ increased, and the wettability increased as a result of IPN of alginate and $CaCl_2$. The hydrogel containing the alginate and $CaCl_2$ was confirmed possible utilization as contact lens material.

• Journal of Life Science
• /
• v.26 no.9
• /
• pp.1056-1062
• /
• 2016

Lung cancer is currently the most common malignant disease and the leading cause of mortality in the world and non-small cell lung cancer (NSCLC) accounts for 75-80% of lung cancer cases. miR-155 gene was found to be over expressed in several solid tumors, such as thyroid carcinoma, breast cancer, colon cancer, cervical cancer, pancreatic ductal adenocarcinoma (PDAC) and lung cancer. The aims of this study were to define the expression of miR-155 in lung cancer and its associated clinic-pathologic characteristics. Total RNA was purified from formalin-fixed, paraffin-embedded NSCLC tissues and benign lung tissues. Expression of miR-155 in human lung cancer tissues were evaluated as mean fold changes of miR-155 in cancer tissues compared to benign lung tissues by quantitative real-time reverse transcriptase polymerase chain reaction (real-time qRT-PCR) and associations of miR-155 expression with clinic-pathologic findings of cancer. Compared with the benign control group, miR-155 expression was significantly overexpressed in NSCLCs (p=<0.001). miR-155 was more overexpressed in squamous cell carcinoma than in adenocarcinoma. Poorly differentiated tumors showed significantly overexpression of miR-155 than well-differentiated tumors (p=<0.001). Overexpression of miR-155 was significantly associated with lymph node metastasis (p=<0.05). In survival analysis for all NSCLC patients, high miR-155 expression was significantly correlated with worse overall survival (p=<0.05). These results suggested that miR-155 might play an important role in lung cancer progression and metastasis.

• Korean Journal of Clinical Laboratory Science
• /
• v.50 no.4
• /
• pp.449-456
• /
• 2018

Cervical cancer is the fourth most frequently diagnosed cancer in women worldwide. In lower Human Development Index countries, it has the second highest incidence and mortality among cancer in women. Therefore, better diagnosis and treatment systems are needed. Among them, estrogen receptor alpha ($ER-{\alpha}$) mRNA expression has been analyzed with RT-qPCR since several studies reported that $ER-{\alpha}$ is necessary in the maturation of the uterus and is related to cervical cancer. In this study, $ER-{\alpha}$ quantitative analysis was performed on various lesions and normal tissue samples. Based on the receiver operating characteristic (ROC) curve, its sensitivity and specificity were 85% and 75%, respectively, showing higher or similar results to those of conventional HPV tests. In addition, its expression level was analyzed with clinical information. With regression analysis, the R square value between the $ER-{\alpha}$ mRNA expression level and menopause status was 0.5041, indicating a strong correlation. This study was performed as part of a pilot study and suggests that $ER-{\alpha}$ is related to carcinogenesis. Future studies will examine other hormones and menopausal factors with a larger sample size.