• Journal of the Korean Geotechnical Society
• /
• v.17 no.6
• /
• pp.163-171
• /
• 2001

It is important to pay careful attention to the backfill construction for the structural integrity of concrete box culvert. To increase the structural integrity of culvert good compaction by the dynamic compaction roller with big capacity is as effective as good backfill materials. However structural distress of the culvert could be occurred due to the excessive earth pressure by great dynamic compaction load. In this study, two box culverts were constructed with change compaction materials and construction methods. Two type of on-site soils such as subbase and subgrade materials were used as backfill materials. In most case, dynamic compaction rollers with 11 to 12 ton weights were used and vibration frequency were applied from 2000 to 2500 rpm for the great compaction energy. Backfill compactions with good quality soils were carried out to examine the effect of cushions on dynamic lateral soil pressure. Expanded polystyrene (EPS) and rubber of tire were adapted as cushion materials and they are set on the culverts before backfill construction. This paper presents the main results on the characteristics of dynamic earth pressures. Test result indicates that the amounts of increased dynamic pressures are affected with backfill materials, depth of pressure cell, and compaction condition. The earth pressure during compaction can give harmful effect to box culvert because the value of dynamic earth pressure coefficient $(\DeltaK_{dyn}=\DeltaK\sigma_h\DeltaK\sigma_v)$ during compaction is greater than that of static condition. It was observed that cushion panels of EPS(t=10cm) and rubber(t=5cm) are effective to mitigate dynamic lateral pressure on the culverts.

• Journal of Korean Society of Transportation
• /
• v.17 no.5
• /
• pp.99-110
• /
• 1999

This study deals with the adaptability questions of O-D table estimation models. Its objectives are two-fold; (1) to estimate the characteristics of various O-D table estimation models(i.e. linear regression models. entropy models and statistic models) and (2) to find the model which estimates the O-D table with the best accuracy under the various data conditions. In Pursuing the above, this study gives the particular attentions to the test of the models, using the Sioux Falls network and equilibrium assignment method of MINUTP. The major findings are the followings. Firstly. it finds that the statistic models have the most goodness of fat among all models, if the required data are all Prepared. But it Presents that statistic models are the most sensitive against the underspecification and inconsistency problems of link data. Secondly, It shows that the linear regression models have the worst goodness of fat among all models. But the linear regression models are the most insensitive to the underspecification and inconsistency problems. Thirdly, THE/1 model of entropy model is sensitive against the underspecification and incon-sistency problems, but THE/2 model is insensitive. Finally, other informations like total volume, zonal Production and attraction volumes in 0-D table, help models to gain the better goodness of fit. Especially, in the statistic models. both the zonal production and attraction volume data are helpful to estimate the link volumes. It can be expected that the results dive some implications not only to the selection of optimal model under the various given data, but also to the development or modification of model.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.2
• /
• pp.39-45
• /
• 1964

The phenotypic and genotypic correlations and heritabitities were calculated on 10 characters measured, using 10 native and 10 of introduced soybean varieties planted on 7 times with 15 days interval from April 15th. The genotypic correlations associated with grain yield were partitioned in to direct and indirect effects through the path coefficient analysis. The results are summarized as follows; 1. Generally high associations between characters were found, with high genotypic correlations than phenotypic, due to, probably, the fact that non segregating fixed varieties were used, and that the environmental effects were not elliminated appropreately here. Neverthless, the relative degree of association could be estimated. 2. The degree of associations of characters were different according the planting time, requiring the considerations on the specific characteristics depending on the specific planting time. 3. The introduced varieties were different with native ones in many respects, especially on the associations with stem length, stem diameter and seed weight. Here, the degree and the directions of the associations in the introduced ones were some peculier. 4. The less significant differences of characters between native varieties caused the heritability of native lower than that of introduced except the heritability of days from blooming to mature and seed weight. 5. The genetic associations of characters, measured, with grain yield were partitioned in to direct and indirect effects, calculating path coefficients. The days to bloom, stem length and stem diameter were most significantly affected the grain yield in the 5th planting of native ones.

• Management & Information Systems Review
• /
• v.28 no.3
• /
• pp.1-23
• /
• 2009

Prior bankruptcy studies have established that bankrupt firm's pre-filing financial ratios are different from those of healthy firms or of randomly selected going concerns. However, they may not be sufficiently different from the financial ratios of other firms in financial distress to allow the development of a ratio-based model that predicts bankruptcy with reasonable accuracy. As the result, in the multiple discriminant model, independent variables divided firms into bankrupt firms and healthy firms are retained earnings to total asset, receivable turnover, net income to sales, financial expenses, inventory turnover, owner's equity to total asset, cash flow to current liability, and current asset to current liability. Moreover four variables Retained earnings to total asset, net income to sales, total asset turnover, owner's equity to total asset indicate that these valuables classify bankrupt firms and distress firms. On the other hand, Owner's Equity to borrowed capital, Ordinary income to Net Sales, Operating Income to Total Asset, Total Asset Turnover and Inventory Turnover are selected to predict bankruptcy possibility in the Logistic regression model.

• Journal of the Institute of Electronics Engineers of Korea SP
• /
• v.39 no.4
• /
• pp.442-454
• /
• 2002

It's noticed that the SA-DCT (Shape-Adaptive Discrete Cosine Transform) produces different 2-dimensional transform coefficients according as the first 1-dimensional transform is applied in horizontal or vertical direction for an arbitrarily shaped boundary block. Performing the first 1-dimensional transform in the direction, which has higher spatial correlation or smaller shifting distance, can compact the energy on the smaller number of AC coefficients around DC. This paper shows, experimentally, the compaction capability improvement by choosing the first 1-dimensional transform direction with higher spatial correlation or smaller shifting distance. Two adaptive selection methods are proposed to decide efficiently the spatial direction with higher correlation in a boundary block. One is based on the gradients between DC coefficients of neighboring and current blocks, and the other is based on the final coding efficiency that means the number of bits required for coding the block. Using the MPEG-4 video coder, the proposed method shows coding efficiency gain up to 10.87% compared to the conventional SA-DCT method.

• Journal of the Korean Academy of Child and Adolescent Psychiatry
• /
• v.12 no.2
• /
• pp.218-224
• /
• 2001

Although Attention Deficit Hyperactivity Disorder(ADHD) has been considered as the disorder occurring during childhood, the prevalence is increasing among adolescents and adults. The prevalence rate varies from 2.0 to 14.3% due to the difference of diagnostic criteria, different assessment methods, or subjects' age difference. Therefore, it needs to make age specific(i.e., for children, for adolescents, and for adults) assessment tools. Authors translated Conners-Wells Adolescents Self-Report Scales(short form)[CASS(S)] in to Korean to get validity and reliability as a way of development of assessment tool for adolescent with ADHD in Korea. CASS(S) was translated and corrtected by three psychiatrists and one clinical psychologist. To examine the concurrent validity and test-retest validity, CASS(S) was applied with K-YSR on one class of each grade in a middle school in Seoul with two week interval(total 115：male 58, female 57). To test validity, authors analysed and got Cronbach's as internal consistency. Construct validity was done by principal axis factor analysis on 4,354 students. As a result, Cronbach's alpha for internal consistency was .88, Pearson coefficient for test-retest reliability .83, and coefficient for concurrent validity .65. And in the factor analysis to examine construct validity, three factors were revealed as cognition, hyperactivity, and conduct. These results shows that CASS(S) may be useful tool for adolescents with ADHD, although there was a limit not to be done the comparison with clinical groups.

• Journal of the Korean Society for Library and Information Science
• /
• v.30 no.2
• /
• pp.167-188
• /
• 1996

The lack of an understanding of the characteristics and searching abilities of a specific user group in computer-based information systems in libraries hinders library and information science professionals in making the best decisions when designing, acquiring, and managing information systems. The objective of this study was to provide information on the characteristics and searching abilities of specific groups such as Korean college students & ones who study abroad, male & female, undergraduate & graduate students, etc. This study also has focused on the methods of loaming to use OPACs and non-user study. Questionnaire was administered to both Korean college students in the city of Taegu, Korea and students who study abroad in the state of Texas, US.A. 345 usable questionnaires were obtained and analyzed. These were analyzed using descriptive, inferential statistics, multiple correlation, and SPSS software. The. major findings of this study are: (1) There was a significant difference among specific student user groups except undergraduate and artiste-athlete students in the distribution of their knowledge about how to use OPACs: (2) There was a significant difference among specific groups in the means of their knowledge: (3) There was no significant difference among un. groups in the distribution of loaming method to use OPAC systems : (4) The correlation between the number of searching methods that the respondents knew in using OPACS and the amount of using computers (0.6635) is comparatively higher than my other correlation to the searching methods. Also, years of experience using computers, frequencies of computer use, and frequencies of OPAC use are comparatively higher than frequencies of library use and frequencies of manual card catalog un: (5) Frequencies of manual card catalog use have low negative correlations with the number of searching methods that the respondents knew in using OPACs: (6) Frequencies of manual card catalog use have little if any negative negative with OPAC and computer use. Conclusions are drawn from the findings in this paper, and recommendations an proposed when designing, adopting, or managing a new system. Topics fur future studies on the characteristics of OPAC systems and their use are also suggested.

• The Journal of Korea Institute of Information, Electronics, and Communication Technology
• /
• v.8 no.6
• /
• pp.445-452
• /
• 2015

Software reliability in the software development process is an important issue. Software process improvement helps in finishing with reliable software product. Infinite failure NHPP software reliability models presented in the literature exhibit either constant, monotonic increasing or monotonic decreasing failure occurrence rates per fault. In this paper, proposes the reliability model with log and power intensity function (log linear, log power and exponential power), which made out efficiency application for software reliability. Algorithm to estimate the parameters used to maximum likelihood estimator and bisection method, model selection based on mean square error (MSE) and coefficient of determination($R^2$), for the sake of efficient model, was employed. Analysis of failure, using real data set for the sake of proposing log and power intensity function, was employed. This analysis of failure data compared with log and power intensity function. In order to insurance for the reliability of data, Laplace trend test was employed. In this study, the log type model is also efficient in terms of reliability because it (the coefficient of determination is 70% or more) in the field of the conventional model can be used as an alternative could be confirmed. From this paper, software developers have to consider the growth model by prior knowledge of the software to identify failure modes which can be able to help.

• The Journal of Korea Institute of Information, Electronics, and Communication Technology
• /
• v.9 no.3
• /
• pp.278-284
• /
• 2016

Software reliability in the software development process is an important issue. In infinite failure NHPP software reliability models, the fault occurrence rates may have constant, monotonic increasing or monotonic decreasing pattern. In this paper, infinite failures NHPP models that the situation was reflected for the fault occurs in the repair time, were presented about comparing property. Commonly, the software model of the infinite failures using the linear hazard rate distribution software reliability based on intercept parameter was used in business economics and actuarial modeling, was presented for comparison problem. The result is that a relatively large intercept parameter was appeared effectively form. The parameters estimation using maximum likelihood estimation was conducted and model selection was performed using the mean square error and the coefficient of determination. The linear hazard rate distribution model is also efficient in terms of reliability because it (the coefficient of determination is 90% or more) in the field of the conventional model can be used as an alternative model could be confirmed. From this paper, the software developers have to consider intercept parameter of life distribution by prior knowledge of the software to identify failure modes which can be able to help.

• Journal of Digital Convergence
• /
• v.17 no.8
• /
• pp.447-452
• /
• 2019

Modern people are investing a lot of time and economically in their appearance as a means of expressing their aesthetic desires. They have a lot of hair dyes that make up most of their appearance, but their hair damage is serious. Especially, they use hair dyes which are very popular among the hair cosmetics that make up most of their appearance, but their hair damage is serious. The purpose of this study is to investigate the hair tensile strength of hair with oxidative hair dye to induce styling while minimizing hair damage. The results showed that the Max. load, Max. stress, Max. elongation, break load, break stress, break elongation, maximum modulus and tangential modulus according to evaluation interval were significantly different between control and 8N-10N experimental groups. The maximum modulus and tangential modulus for the strain interval did not show tendency to increase or decrease constantly, although there was a difference between the control and experimental group. Therefore this study was conducted to investigate the correlation between hair loss and hair damage through the treatment of high grade oxidative hair dye, which is widely used in ield of industry. We want to provide application data.