• Proceedings of the KSEEG Conference
• /
• 2001.04a
• /
• pp.68-68
• /
• 2001

• Journal of Industrial Technology
• /
• v.20 no.A
• /
• pp.303-309
• /
• 2000

Seismic reflection method is applied to detect shallow location of limestone in Chechon area. The data using hammer source is compared with that of weight drop. Small size hammer and weight-drop are used as energy source and 100Hz geophones are used for data aquisition. Data processing is conducted utilizing the available processing technique of "Geobit", which is seismic data processing software developed by KIGAM. The result of above data processing, the velocity of topsoil layer is 1,250m/sec. The velocity of this area is higher than other area because loading trucks pass this area and make this layer compact. And in limestone area, hammer is proposed to energy source instead of weight drop because the energy propagates the layer very well.

• Economic and Environmental Geology
• /
• v.31 no.6
• /
• pp.519-526
• /
• 1998

A high-resolution seismic survey was conducted at the northeastern boundary of Pungam basin, one of the Cretaceous sedimentary basins in Korea. A 100 kg weight was used as an energy source and was found to be better than a sledge hammer in mapping deeper geologic structures. Several processing techniques such as f-k filtering, predictive deconvolution, and time-variant filtering are useful to enhance the signal-to-noise ratio by suppressing unwanted seismic energy. Four seismic units are recognized where many vertical faults are developed. The boundary fault between sedimentary rocks and Precambrian gneiss is identified along with a fracture zone of approximately 30 m wide. Bedding planes of the sedimentary rocks dipping westward are interpreted to be limbs of a syncline or volcanic flow. There faults and tilted bedding planes indicate that the basin had undergone significant tectonic deformation.

• Geophysics and Geophysical Exploration
• /
• v.13 no.1
• /
• pp.88-95
• /
• 2010

An airborne gravity survey using a helicopter was carried out in October 2008, offshore along the northern Noto Peninsula, to understand the shallow and regional underground structure. Eleven flight lines, including three tie lines, were arranged at 2 km spacing within 20 km of the coast. The total length of the flight lines was ~700 km. The Bouguer anomalies computed from the airborne gravimetry are consistent with those computed from land and shipborne gravimetry, which gradually decrease in the offshore direction. So, the accuracy of the airborne system is considered to be adequate. A local gravity low in Wajima Bay, which was already known from seafloor gravimetry, was also observed. This suggests that the airborne system has a structural resolution of ~2 km. Reduction of gravity data to a common datum was conducted by compiling the three kinds of gravity data, from airborne, shipborne, and land surveys. In the present study, we have used a solid angle numerical integration method and an iteration method. We finally calculated the gravity anomalies at 300 m above sea level. We needed to add corrections of 2.5 mGals in order to compile the airborne and shipborne gravity data smoothly, so the accuracy of the Bouguer anomaly map is considered to be nearly 2 mGal on the whole, and 5 mGals at worst in limited or local areas.

• Geophysics and Geophysical Exploration
• /
• v.9 no.1
• /
• pp.37-43
• /
• 2006

In 2006, the Cooperative Research Centre for Greenhouse Gas Technologies (CO2CRC) plans to undertake (subject to receiving the necessary approvals) a Pilot program for $CO_2$ storage within a depleted gas reservoir. The Otway Basin Pilot Program (OBPP) aims to demonstrate that subsurface $CO_2$ storage is both economically and environmentally sustainable in Australia. This will be the first $CO_2$ storage program in the world to utilise a depleted gas reservoir and, hence, the experience gained will be a valuable addition to the range of international $CO_2$ storage programs that are underway or being planned. A key component of the OBPP is the design of an appropriate geophysical monitoring strategy that will allow the subsurface migration of the $CO_2$ plume to be tracked and to verify that containment has been successful. This paper presents the results from modelling the predicted gravity response to $CO_2$ injection into the Otway Basin reservoir, where the goal was to determine minimum volumes of $CO_2$ that may be detectable using non-seismic geophysical techniques. Modelling results indicate that gravity measurements at 10 m spacing within the existing observation well and the planned $CO_2$ injection well would provide excellent vertical resolution, even for the smallest $CO_2$ volume modelled (10000 tonnes), but resolving the lateral extent of the plume would not be possible without additional wells at closer spacing.

• Journal of the Korean Society for Precision Engineering
• /
• v.33 no.10
• /
• pp.789-796
• /
• 2016

The weight of an antenna system pointing satellite on the mobile platform is restricted by the weight limit of the mobile platform. The maximum power of the actuator driving the antenna system is thus limited because a high power actuator needs a heavier weight. Thus, a drive system is designed to have a low torque requirement by reducing the gravitational torque depending on gravity or acceleration of the mobile platform, including vibration, shock, and accelerated motion. To reduce the gravitational torque, the mathematical model of the gravitational torque is preferentially obtained. However, the method to directly estimate the mathematical model in an antenna system has not previously been reported. In this paper, a method is proposed to estimate the gravitational torque as a mathematical model in the antenna system. Additionally, a method is also proposed to calculate the optimal weight of the balancing weight to compensate for the gravitational torque.

• Publications of The Korean Astronomical Society
• /
• v.14 no.1
• /
• pp.9-22
• /
• 1999

Current searches for gravitational microlensing events are being carried out only by a photometric method. In this review paper, we demonstrate that the nature of Galactic lenses can be significantly better constrained with the additional astrometric observations of microlensng events. First, by astromerically observing lensing events, one can resolve the lens parameter degeneracy, and thus the lens mass can be determined with improved precision. Second, by being free from the blending problem, astrometric observations of lensing events will allow one to improve the uncertainties in the determined Einstein time scales. Third, the lens brightness, which could not be measured photometrically, can be measured from the astrometric observations of lensing events, and thus the nature of lens matter can be better constrained. Finally, with the help of astrometric followup observations of a binary-lens event, one can uniquely determine the solution of lens parameters, allowing one to obtain important astronomical information about the source star and the lens itself.

• Proceedings of the Membrane Society of Korea Conference
• /
• 1995.04a
• /
• pp.62-63
• /
• 1995

혐기성 소화는 고농도의 유기폐수를 최종적으로 메탄으로 전환하여 에너지원을 회수할 수 있는 효율적인 생물학적 폐수처리 공정 중의 하나이다. 그런데 이러한 혐기성 소화 공정에서 가장 큰 장애요인으로 작용하고 있는 요소 중의 하나가 매생물의 침강성 저하로 인한 고액분리의 문제이다. 이로인해 현재 고전적인 중력침강법, 부상법 대신에 분리막을 이용한 막결합형 혐기성 소화 공정이 대두되고 있으며 완전한 고액분리, 반응조내의 고농도 미생물 보유, 양질의 최종 유출수 획득 등 많은 장점들이 제시되고 있다. 그러나 이러한 장점에도 불구하고 시간에 따른 막오염 현상, 분리막 표면에서의 케이크층 형성 등으로 인한 막투과 유속 (flux)의 감소는 분리막의 응용에 있어 경제성을 저하시키는 주요한 부정적 요인으로 지적되고 있다. 그리고 막분리 성능은 분리막의 특성, 유체역학적 조건, 그리고 혐기성 소화 상태 등에 의해 영향을 받을 수 있다. 본 연구에서는 막결합형 혐기성 소화 공정의 십자흐름 (crossflow) 막분리 공정에서 유체역학적 조건 및 혐기성 소화조의 상태와 관련된 요인들이 어떻게 막투과도 및 배제율 등에 영향을 미치는 지 살펴보고자 한다.

• Journal of the Korean Geophysical Society
• /
• v.2 no.2
• /
• pp.100-110
• /
• 1999

In order to find a good seismic source for high-resolution reflection surveys on a tidal flat, characteristic features of several sources were examined through test recording by the walkaway configuration. The sources comprise portable vibrator, 1.2 kg monkey spanner, 4.7 kg sledge hammer, and weight drops with a 30 kg and a 100 kg iron ball, respectively. We analyzed raw and filtered seismic data for the resolution of individual events, then compared various seismic sources to define suitable one for the high-resolution survey in terms of energy level and frequency contents. The study reveals that the portable vibrator is the most suitable source for the detection of and imaging geologic structures less than 20-30 m deep in a tidal flat. We ascribe this to the wide frequency band and high-frequency contents of the portable vibrator. In contrast, the hammer may be an alternative where the target depth increases up to 100 m.

• The Journal of the Korea Contents Association
• /
• v.17 no.7
• /
• pp.283-293
• /
• 2017

This study analyzed the actual conditions of use of public sports facilities and characteristics of the users of the facilities through surveys and measured the spatial imbalance of the public sports facilities currently supplied by using gravity potential model. This study also suggests evaluation criteria that may be considered for efficient location selection by examining the change of accessibility to the facilities that meet the needs of users in the future. As the results of the questionnaire survey, unlike current usage, the users hoped for badminton, weight training and swimming. And we could confirm the demand for the expansion of the multi - purpose indoor gym which can carry out such activities in the areas. As the result of the analysis on the difference in accessibility of the public sports facility, there were some large variations in the regions. It was found that a balanced supply of facilities was needed in terms of equity. In particular, when analyzing by considering the population estimates of 2025, It is analyzed that the accessibility will be reduced to about 60% compared to that of 2015. In addition, it is evaluated as the best alternative in terms of overall efficiency that the location of the facilities should be in Munsan area where population growth is expected in the future.