• Title/Summary/Keyword: 중량 관리

Search Result 330, Processing Time 0.027 seconds

Simplified Bridge Weigh-In-Motion Algorithm using Strain Response of Short Span RC T-beam Bridge with no Crossbeam installed (가로보가 없는 단지간 RC T빔교의 변형률 응답을 이용한 단순화된 BWIM (Bridge Weigh-In-Motion) 알고리즘)

  • Jeon, Jun-Chang;Hwang, Yoon Koog;Lee, Hee-Hyun
    • Journal of the Korea institute for structural maintenance and inspection
    • /
    • v.25 no.3
    • /
    • pp.57-67
    • /
    • 2021
  • A thorough administration of the arterial road network requires a continuous supply of updated and accurate information about the traffic that travels on the roads. One of the ways to effectively obtain the traffic volume and weight distribution of heavy vehicles is the BWIM technique, which is actively being studied. Unlike previous studies, this study was performed to develop a simplified Bridge Weigh-In-Motion (BWIM) algorithm that can easily estimate the axle spacing and weight of a traveling vehicle by utilizing the structural characteristics of the bridge. A short span RC T-beam bridge with no crossbeam installed was selected for the study, and then the strain response characteristics of bridge deck and girder was checked through preliminary field test. Based on the preliminary field test results, a simplified BWIM algorithm suitable for the bridge to be studied was derived. The validity and accuracy of the BWIM algorithm derived in this study were verified through field test. As a result of the verification test, the proposed BWIM algorithm can estimate the axle spacing and gross weight of the travelling vehicles with the average percent error of less than 3%.

Onshore Deck Mating for Deepwater Nautilus by Super Lift

  • GAB-REA CHO
    • Journal of Ocean Engineering and Technology
    • /
    • v.16 no.1
    • /
    • pp.71-75
    • /
    • 2002
  • 대형 시추구조물의 건조는 보통 드라이도크에서 하거나, 해양에서 선체와 데크를 접합하는 방법을 사용한다. 그러나 적당한 해양 접합장소가 없거나 드라이도크의 공간부족으로 현대중공업에서는 드라이도크나 해양에서의 접합건조 대신 부유식 시추구조물을 지상에서 조립하는 방법을 채택하게 되었다. 현대중공업에서는 세 가지 단계를 통해 지상 데크조립을 수행하였다. 첫 번째는 네 개의 철골구조 리프팅타워 상에서 유압리프팅시스템을 이용하여 데크를 지상으로부터 38m 들어올린다. 두 번째는 마찰을 줄이기 위해 윤활제가 칠해진 합성 플라스틱으로 싸인 미끄럼틀(Skidway)을 이용하여 두 개의 6000톤 짜리 하부구조를 데크 아래로 끌어 들인다. 마지막 단계로 데크와 하부구조를 단단히 결합시킨다. 이 과정에 2주일이 소요되었으며 일련의 작업을 거쳐 중량 25,500톤급의 Deepwater Nautilus (RBS-8M) 시추선을 무사히 바다 위로 인도하였다. RBS-8M의 데크결합에 Super Lift를 적용하여 성공시킨 사례를 통해 현대중공업의 초대형 시추구조물 건조방식이 이상적이고, 작업 공기나 원가 측면에서 우위가 있음을 시사하고 있으며 이렇게 건조작업의 대부분을 지상에서 수행한 과정을 통해 작업관리, 품질관리, 일정관리에도 좋은 결과를 가져올 수 있었다.

Ergonomic Analysis for the Aging-Friendly Exercise Device Utilized on the Digital Load Control Technology (디지털 중량제어기술을 활용한 고령친화운동기구의 인간공학적 분석)

  • Kim, Bo-Kun;Jang, Young-Kwan;Hah, Chong-Ku;Baek, Jun-Young
    • Journal of the Korea Academia-Industrial cooperation Society
    • /
    • v.22 no.3
    • /
    • pp.252-260
    • /
    • 2021
  • For frailty management, the importance of resistance exercise has been emphasized, and various devices have been developed. Recently, digital weight control technology that converts electromagnetic resistance to a digital weight is attracting attention, but there are no reports confirming the effectiveness and safety of the device for seniors in Korea. This study conducted a biomechanic-based ergonomic analysis of an elderly-friendly exercise device utilized in digital load control technology to suggest a direction for development. Twenty seniors (age: 62.40 ± 2.09 years) were included. The load of the device was classified into three levels, and the muscle activity and heart rate were assessed during three experimental motions. A questionnaire based on the International Organization for Standardization 9241-11 was adopted to evaluate the stability, operationality, efficiency, and satisfaction with the software and device. The program could be divided into three exercise intensities that can be utilized in the field depending on whether the exercise load, muscle activity, and heart rate were consistent. The monitor size needed to be enlarged to make the menu Korean, reduce the device size, and minimize noise. Considering these findings, the development of an advanced age-friendly exercise device by improving the size, display, and noise is suggested.

Quality Changes of Hydroponically Grown 'New Raon Red' Paprika Packaged in Corrugated Box as Affected by Storage Temperature (수경재배한 미니 파프리카 '뉴라온레드' 저장온도 별 골판지박스 포장에서 수확후 특성 변화)

  • Chul Geon An;Jung-Soo Lee
    • KOREAN JOURNAL OF PACKAGING SCIENCE & TECHNOLOGY
    • /
    • v.29 no.1
    • /
    • pp.35-41
    • /
    • 2023
  • The purpose of this study was to examine the effect of each storage temperature condition of 5, 10, 15 and 20℃ to maintain the freshness of mini paprika (Capsicum annuum cv. New Raon Red) in corrugated box. Changes in general appearance, fresh weight loss, firmness, SSC (solid sugar content), and Hue angle were investigated. Furthermore, storage at temperatures ranging from 5℃ to 15℃ for 14 days resulted in maintaining freshness for 35 days. Paprika stored at 20℃ showed significantly higher loss of fresh weight and firmness than that of other storage temperatures. Furthermore, paprika stored at 5℃ and 10℃ showed a lesser decrease in hue angle than that at 15℃ and 20℃. However, the SSC of mini paprika was not significantly affected by storage temperature. These results suggest that corrugated box packaging in combination with low storage temperatures (5~10℃) could be effective in prolonging the shelf life of mini paprika. Therefore, the results represented that the low temperature storage in combination with cardboard box treatment could be effective in prolonging the shelf life of fresh paprika.

핫셀 운영을 위한 부속 설치물의 차폐능 평가

  • 조일제;국동학;구정회;정원명;유길성;이은표;박성원
    • Proceedings of the Korean Radioactive Waste Society Conference
    • /
    • 2004.06a
    • /
    • pp.347-348
    • /
    • 2004
  • 차세대관리 종합공정 실증시설의 핫셀 차폐벽은 중량콘크리트 재질로서 외벽의 두께는 90cm 이상으로 설계되었으며, 차폐벽의 모든 부위는 이와 동일한 차폐능을 확보하도록 하여야 한다. 그러나 핫셀 운영을 위하여 불가피하게 설치되는 여러 가지 부속 시설물들에 의하여 원래 계획한 핫셀 차폐벽의 차폐능 저하를 가져오게 되며, 이런 부속 시설물로는 차폐 출입문, 방사성 물질을 핫셀 내부로 반입하거나 반출하기 위한 수송용기 접합부, 소형물 투입구, 슬리브 및 매설관등이 있다.(중략)

  • PDF

근골격계질환의 제도적 관리에 관한 연구

  • 김용수;이관석;장성록;김유창;배동철
    • Proceedings of the Korean Institute of Industrial Safety Conference
    • /
    • 2003.05a
    • /
    • pp.108-113
    • /
    • 2003
  • 최근 국내의 산업재해율 증가에 있어 특이한 사항은 근골격계질환, 뇌심혈관질환 등 작업 관련성질환에 의한 증가 현상이다. 특히 단순반복작업, 중량물 취급작업, 부적절한 작업자세 등에 의하여 신체에 과도한 부담을 주었을 때 나타나는 요통, 경견완장해 등 근골격계질환은 매년 급증하고 있으며(Table 1 참조) 향후에도 지속적인 증가가 예상된다.(중략)

  • PDF

안전현장스케치 - 인쇄업종의 안전 선도기업 '한국미디어프린팅'

  • Yeon, Seul-Gi
    • The Safety technology
    • /
    • no.199
    • /
    • pp.26-28
    • /
    • 2014
  • 인쇄업종은 예전부터 안전사고가 다발하는 위험업종으로 알려져 있다. 업종특성상 중량물 취급 작업과 유해물질의 사용이 많은 데다, 날카로운 인쇄판을 다루기 때문이다. 그런데 최근 이런 인식이 편견에 불과하며 인쇄업종도 적극적인 개선과 노력을 통해 얼마든지 우수 안전사업장으로 거듭날 수 있음을 보여주는 사업장이 있어 큰 주목을 받고 있다. 그 주인공은 바로 경기도 성남에 위치한 '한국미디어프린팅'이다. 한국일보의 자회사인 이곳 사업장은 대대적인 자동화시스템으로의 개선과 임직원 모두의 적극적인 안전활동을 통해 안전사고를 대폭 감소시킨 것은 물론 품질 향상도 이뤄냈다. 우수한 안전관리를 통해 인쇄업종의 선도기업으로 자리매김하고 있는 이곳 사업장을 찾아가봤다.

  • PDF

기획특집-조사료와 소의 영양ㆍ생리

  • Korea Feed Ingredients Association
    • Feed Journal
    • /
    • v.4 no.6 s.34
    • /
    • pp.81-111
    • /
    • 2006
  • 반추동물인 소의 영양생리작용에 있어 조사료의 중요성이 강조되고 있지만 국내 초지조성 면적이 감소하는 등 조사료 생산에 어려움을 겪으며 많은 양의 조사료가 수입돼 이용되고 있다. 조사료의 국내 생산과 수급의 불균형, 품질의 불 균일, 중량 및 부피과다, 초지조성미비 및 축산 종사자의 노력 부재 등은 현재까지도 많은 축산농가에 어려움을 주고 있다. 이에 피드저널 6월호는 소에게 있어 조사료의 중요성에 대해 알아보고 우리나라 조사료 정책과 수급상황, 농장에서 알아야할 관리 및 이용, 초지의 중요성 등 조사료의 전반적인 것에 대해 살펴본다.

  • PDF

인터뷰 - 수송포장관리사제도도입, 기술역량개선주력

  • (사)한국포장협회
    • The monthly packaging world
    • /
    • s.246
    • /
    • pp.100-103
    • /
    • 2013
  • 공업포장업계의 선진화된 기술을 적극적으로 습득하고 기술인력의 양성을 통해 급변하는 물류환경 변화에 적극 대처해 온 한국공업포장협회가 8월 23일 창립 10주년을 맞아 기념식을 열었다. 협회는 2003년 1월, 중량물 포장 업계 단체 설립을 위한 예비 모임 19개사가 참석해 단체 설립에 동의하고 적극 추진하기로 합의한 이후, 2003년 2월 22개가 한국공업포장협의회를 발족하고 임원을 선임, 그해 8월 창립총회를 개최, 금년 10년의 역사를 맞게 됐다. 협회 창립 초기부터 현재에 이르기까지 협회 및 업계 발전을 위해 다각도로 노력해 온 김형빈 한국공업포장협회 수송포장기술연구소 소장에게 창립 10주년을 맞은 소감 및 향후 계획을 들어보았다.

  • PDF

Strengthening of Reinforced Concrete Structures using Externally Prestressed CFRP plates (외부 프리스트레스트 탄소섬유판에 의한 구조물 보강공법)

  • 박선규;유영찬
    • Computational Structural Engineering
    • /
    • v.17 no.1
    • /
    • pp.39-42
    • /
    • 2004
  • 콘크리트 구조물에 대한 보강공법은 1950년도에 개발된 강판보강공법을 위시로 하여 강연선에 의한 외부프리스트레싱 공법으로 발전하고 있으며, 약 10년전부터는 신소재인 FRP(Fiber Reinforced Polymer)에 의한 보강공법이 본격적으로 개발되어 실용화되고 있다. 강판보강공법은 에폭시 등의 접착제를 이용하여 콘크리트 인장측에 강판을 접착함으로써 강도 및 강성을 증가시키는 공법으로 강판을 보강재로 이용함으로써 공법에 대한 인지도가 높은 장점이 있는 반면, 재료의 가공 및 취급이 어려우며 중량이 커 자중이 증가되는 단점이 있다. 또한, 강재의 부식위험이 상존하고 있어 이에 대한 세심한 배려 및 주기적인 유지관리를 필요로 한다.(중략)