• Proceedings of the Korean Society of Dyers and Finishers Conference
• /
• 2012.03a
• /
• pp.27-27
• /
• 2012

나노필라멘트는 단면직경이 수백 나노미터에서 수십 나노미터 수준인 초극세 장섬유를 말하며, 해도형 복합방사로 얻어진 섬유를 알칼리 감량을 통해 해성분을 용출하여 도성분에 해당하는 나노필라멘트를 얻는다. 이러한 나노필라멘트사는 극세사와 마찬가지로 단위중량당 표면적이 크고, 작은 굴곡반경 및 낮은 굴곡 반발성으로 인하여 일반 합성섬유에 비하여 고가성 및 새로운 기능성을 부여하는 제품에 응용될 수 있다. 나노필라멘트 편물은 원사섬도, 편물의 조직, 밀도 및 중량 등에 따라 분할율과 용출 특성이 상이하므로 후가공 공정에 있어서 감량공정은 매우 중요하다. 또한 나노필라멘트와 같은 세사의 경우 일반사보다 비표면적이 증가하여 동일한 염색조건에서 옅은 색상을 나타낸다. 이로 인해 같은 색상을 위하여 보다 많은 염료를 투입해야 하며, 결과적으로 견뢰도 문제가 발생할 우려가 있다. 이 연구에서는 800nm급 해도형 나노필라멘트 PET 100% 또는 나노필라멘트와 일반 PET사를 복합한 편물을 이용하여 알칼리 감량거동 및 분산염료에 대한 염색성과 견뢰도를 연구하였다. 알칼리 감량이 진행됨에 따라 감량률이 증가하였으며, SEM분석, DSC분석, 양이온염료 염색법 등을 통하여 해성분 용출 및 도성분 분할이 진행되는 정도를 평가할 수 있었다. 나노필라멘트 편성물은 염료농도가 증가함에 따라 지속적으로 K/S값이 증가하였으나, 일반 극세사 편성물에 비해 낮은 K/S값을 얻었다. 또한 나노필라멘트/일반 PET 복합편물에 있어서 염색온도가 110에서 $130^{\circ}C$로 증가함에 따라 K/S값이 감소하였는데, 이는 고온에서 분산염료가 나노필라멘트로부터 일반 PET사로 이염이 더 많이 발생하였기 때문이라고 생각된다. 세탁견뢰도의 경우 양호하였으나, 일광견뢰도의 경우 1등급으로 매우 낮았다.

• Journal of the Korean Society of Hazard Mitigation
• /
• v.4 no.2 s.13
• /
• pp.29-34
• /
• 2004

The time to ignition, heat release rate characteristics, and carbon monoxide yield of fiber reinforced and sandwich phenol resin were investigated with cone calorimeter. The fire characteristics of unsaturated polyester, mostly being applied to the existing passenger train, and phenolic resin were compared. DSC & TGA was used to monitor the degree of thermal decomposition and weight loss for the phenolic resin. According to the cone calorimeter data, the time to ignition was shorter, heat release rate, and CO yield was higher as the external heat flux increased. Under the same heat flux, the time to ignition of sandwich type phenolic resin was shorter than that of laminated. The result of comparison between unsaturated polyester and phenolic resin was that phenolic resin was shown to have better fire resistance than unsaturated polyester.

• Journal of the Korean Society of Hazard Mitigation
• /
• v.10 no.4
• /
• pp.17-24
• /
• 2010

The hollow RC(Reinforced concrete) pier has the merit of lightweight pier compared with solid RC pier. However, the hollow RC pier shows a low ductile behavior due to brittle failure of inside concrete. To overcome this problem, the internally confined hollow reinforced concrete column has been developed. In this study, the behavior of internally confined hollow RC piers were evaluated with safety ratio, ductility, total material cost, the total weight of the pier, etc. The chosen parameters for the study are hollow ratio, thickness of internal steel tube, intervals between vertical re-bars, numbers of horizontal re-bars, and strength of concrete. As a result of parameters study, the usage of a minimum necessary thickness of the internal steel tube is the most effective.

• Membrane Journal
• /
• v.18 no.4
• /
• pp.336-344
• /
• 2008

This manuscript deals with the investigation of the possibility of the crosslinked poly(vinyl alcohol) membranes with both poly(styrene sulfonic acid-co-maleic acid) and 3-(trihydroxysilyl)-1-propanesulfonic acid (THS-PSA) for the fuel cell application. The studies were focused on the characterization of the resulting membranes through water content, thermal gravimetric analysis, ion exchange capacity, ion conductivity and methanol permeability measurements and then compared with the existing Nafion membrane. Typically, the ion conductivity lied in the range of $10^{-3}$ to $10^{-2}\;S/cm$ while the methanol permeability showed the range of $10^{-6}$ to $10^{-8}\;cm^2/s$.

• Applied Chemistry for Engineering
• /
• v.5 no.6
• /
• pp.1068-1077
• /
• 1994

Blend samples of biodegradable copolyesterethylene(CPEE) with LDPE were prepared by melt-mixing through 0 to 100% per 10% interval for studying of common use of biodegradable polymer. Miscibility behavior of blend samples has been studied by observing the melting temperature change, melting enthalpy, cold crystallization temperature and crystallization enthalpy using differential scanning calorimetry. It was shown that 10~30% blend composition of CPEE had the partial miscibility from the results of thermal analysis. Valuable compatibility has been observed in all blend composition except the samples of 30~80% CPEE component from results of mechanical properties. Morphology of blends has been observed with scanning electron microscopy. Biodegrability of CPEE/LDPE blends has been evaluated by measuring the change of weight after the inoculation with specific microorganism.

• Journal of Animal Environmental Science
• /
• v.8 no.3
• /
• pp.191-198
• /
• 2002

This study was conducted to determine changes in internal temperature and chemical composition during the composting of broiler litter(BL) and to evaluate the feasibility of use of a small-scale pelletizer for the pelleting of composted BL. BL was composted for 4 weeks in an wooden cell with a size of 1 m length $\times$ 1 m width $\times$ 1.2 m height. Internal temperature reached to peak(68$^{\circ}C$) at the fourth day and thereafter gradually reduced. Among chemical components in BL, composting reduced organic matter content and increased dry matter and indigestible protein(ADF-CP) contents. When BL was pelleted using an economical small-scale pelletizer, the proper die diameter was 8~18 mm and the proper moisture content of composted BL was 20~25%. Beyond these proper conditions, addition of heat and pressure or pellet aids may be necessary. Pelleting of BL resulted in nearly threefold increase of bulk density, significant moisture evaporation, and little change in chemical components except for increased indigestible protein. In conclusion, BL may be converted into a feed with low to medium nutrition by the composting and pelleting process.

• Food Science and Preservation
• /
• v.8 no.3
• /
• pp.246-251
• /
• 2001

This study was conducted to investigate the change of qualities of peaches by different packing types and humidity during storage period. The weight loss ratios of 'Kulakatawase' and 'Mibaek' by non-packing were about 6.8% and 4.9% for 4 days storage at room temperature, respectively whereas, the peaches by packing with 30㎛ LDPE were less than 1% for 25 days storage at low temperature and high humidity(95 $\pm$3%). The firmness values of the peaches were not decreased during storage at low temperature compared to the firmness values of the peaches during storage at room temperature. Little difference of total acidity and soluble solids of the peaches was during storage at low temperature. The contents of fructose and glucose in peaches were increased slightly after storage for 25 days but that of sucrose was decreased slightly. When peaches were stored at low temperature(0∼2$\^{C}$) and high humidity(95$\pm$ 3%) after packing with 30㎛ LDPE or 25㎛ perforated polyolefin film 'Kurakatawase ' and 'Mibaek' were able to storage for 20 and 25days, respectively.

• Korean Journal of Food Science and Technology
• /
• v.35 no.6
• /
• pp.1110-1116
• /
• 2003

The effects of packaging methods on the storage quality of minimally processed (prepeeled) onions were investigated to determine the optimal packing design. Various packaging treatments used for modifying headspace atmospheres included two passive MAP using LDPE and PP films, two active MAP using a gas mixture of 20% $O_2/10%\;CO_2/balance\;N_2$ and an ethylene scavenging sachet, and moderate vacuum packaging (MVP). The quality attributes of onion samples were evaluated periodically in terms of flesh weight loss, color of cut surface, decay ratio, microbial counts, and sensory properties during storage at $10^{\circ}C$ for 28 days. Packaging methods did not significantly influence surface color, weight loss, and microbiological populations of mesophiles, psychrotrophs, and lactic acid bacteria. They did, however, affect sensory characteristics as well as decay occurrence. Results indicated that seal-packaging with a gas-permeable plastic film under a mild vacuum condition could retain better onion quality in terms of microbial decay and visual sensory aspects as compared with the other packages.

• Journal of the Korea institute for structural maintenance and inspection
• /
• v.19 no.3
• /
• pp.39-47
• /
• 2015

In this study, the properties of strength and drying shrinkage of alkali-activated slag cement (AASC) with magnesium oxide (MgO) contents between 0 and 16 wt% were investigated. The ground granulated furnace blast slag (GGBFS) was activated by potassium hydroxide (KOH) and dosage of activator was 2M and 4M. The MgO was replaced with 2% to 16% of GGBFS by weight. The water-binder ratio (w/b) was 0.5. In the result, the higher MgO content leads to a slightly higher degree of reaction and thus to a higher compressive strength at all ages. The compressive strength and ultra sonic velocity (UPV) increased with increases MgO contents. The drying shrinkage of AASC was decreased as the contents of MgO increases. The results from SEM confirmed that there were densified reaction product of higher MgO content specimens.

• Applied Biological Chemistry
• /
• v.6
• /
• pp.45-50
• /
• 1965

To confirm the increase effect of $MNH_4$ which has been compounded as a result of two years' potted rice experiments, we have established simple experiment areas in the paddy field of Kyung-Puk, Kyung-Nam and Chon-Puk Provinces and have done the completely randomized design experiments with the following results. 1. Comparison of the gross weight of the harvested rice (Straw included) : The $MNH_4$ 1-area has produced 10-28% more harvest than that of control-area. 2. Comparison of the weight of the Unpolished Rice: The $MNH_4$ 1-area has shown 10-23% increase compared with the control-area. 3. In the comparison of the nutrients of the rice from the $MNH_4-area$ with those of the rice from the control area, $MNH_4-area$ showed increase of $N_2$, $P_{2}O_5$ and $SiO_2$ but a slight decrease of $K_2O$.