• The Korean Journal of Mycology
• /
• v.49 no.1
• /
• pp.57-66
• /
• 2021

Six strains among the shiitake varieties developed by the National Institute of Forest Science were used to select suitable varieties for sawdust block cultivation method. After 100 days cultivation (60 days in dark and 40 days in light), the weight loss rate of the sawdust block media was 14.4% (12.8% to 15.7%) in average. After 5 to 7 days of fruiting process, 2~36 primordia per medium were formed. The number of primordium formation was in the following order: Manchuhyang> Sansanhyang> Sanbaekhyang> Bambithyang> Sangjanghyang> Taehyanggo. The stipe length was 41~59 mm as followed by Taehyanggo (59 mm), Sanbackhyang (56 mm), Bambithyang (54 mm), Manchuhyang (53 mm), Sanjanghyang (45 mm) and Sansanhyang (41 mm). Among the strains, Sansanhyang had short and thick stipe. The average weight of fruiting bodies was 33~77 g as following order of Taehyanggo (77 g), Bambithyang (51 g), Sansanhyang (50 g), Manchuhyang (41 g), Sanjanghyang (34 g) and Sanbackhyang (33 g). Mushroom production per 2 kg medium was the highest in Sanbackhyang (473 g) followed by Bambithyang (287 g), Manchuhyang (175 g), Sansanhyang (109 g), Sanjanghyang (78 g) and Taehyanggo (60 g). The hardness of the cap was 1,218 to 1,839 g/10 mm. Taehyanggo was the hardest (1,839 g/10 mm) and Bambithyang was the softest (1,218 g/10 mm). In conclusion, in the cultivation condition of sawdust block medium, mushroom production was good in Sanbackhyang and Bambithyang. Sansanhyang showed good in terms of fruiting body shape.

• Smart Media Journal
• /
• v.11 no.7
• /
• pp.76-84
• /
• 2022

In Korea, where rice is the staple food, there are many cases in which the nutritional composition of food is different at the same weight, even though the same ingredients are used and the food or food name is the same. The cause is closely related to the moisture content of the food according to the cooking method and cooking process. In order to design a diet tailored to individual health and supply accurate calories and nutrients, a method of expressing food data that is not affected by the cooking process or cooking method is required. Usually, the same ingredients or foods show a lot of deviation from the nutritional components presented in the standard food database due to the difference in moisture content. For this reason, there are problems that increase the complexity of the food ingredient database and the difficulty in using it. As a method to improve these problems, we would like to propose a food data expression method based on dry weight. As an example of this, the characteristics of rice as a food material and changes in major nutritional components according to the change in moisture of various rice-processed foods made from rice were considered. In addition, as an example of how to normalize food data through this, the dry weight-based nutrition label of rice was presented.

• Food Science and Preservation
• /
• v.10 no.1
• /
• pp.16-22
• /
• 2003

This study was conducted to find out effective MA (Modified Atmosphere) gas compositions on the oyster mushroom through statistical analysis of the respiration rate and MA storage for the various packaging materials. Under the various gas compositions, the oxygen consumption rate of oyster mushroom was from 28.9 to 161.4mgO$_2$/kg$.$hr and the carbon dioxide evolution rate was from 53.4 to 166.9 mgCO$_2$/kg$.$hr at 20$^{\circ}C$. The estimated MA condition of oyster mushroom were 2.5∼4.5%O$_2$and 11.5∼l3%CO$_2$by the RSREG(Response Surface Regression). The gas compositions of MA packaging are following that 0.03mm LDPE were 1.6∼3.0%O$_2$and 3.9∼5.3%CO$_2$,0.05mm LDPE were 1.2∼1.3%O$_2$and 9.0∼11.1%CO$_2$and Nylon+PE were 0.9∼1.2%O$_2$and 33.5∼39.6%CO$_2$. The weight loss increased at 0.03mm LDPE but has the lowest value at Nylon+PE. The hardness of pileus and stipe was decreased with storage periods. The $\Delta$E-value increased with storage period and seriously changed in early storage period at 12 and 20$^{\circ}C$. In the 0.05mm LDPE, the gas compositions of packaging were similar to estimated gas compositions from the RSREG and the storage quality was superior to the other packaging materials in weight loss, hardness, and color difference at 4, 12 and 20 $^{\circ}C$.

• Food Science and Preservation
• /
• v.5 no.3
• /
• pp.224-230
• /
• 1998

In order to establish proper storage conditions for ginger, the quality changes of gingers stored at three different temperatures(7$^{\circ}C$, 12$^{\circ}C$ and 20$^{\circ}C$) and three different relative humidities(75%, 85% and 95%RH) were investigated during 150 days of storage. Gingers stored at 7$^{\circ}C$ and 20$^{\circ}C$ showed rapid quality deterioration due to chilling injury and spouting respectively in any range of relative humidity. Ginger stored at 7$^{\circ}C$ was staled to show symptoms of the chilling injury such as moldiness, shrivelling, discoloration etc after 30 days of storage ; then it was deteriorated after 90 days of storage. Ginger stored at 20$^{\circ}C$ was completely lost its storage-life after 30 days of storage because of high sprouting ratio. However ginger stored at 12$^{\circ}C$, 75%RH showed better quality than ones stored at both 7$^{\circ}C$ and 20$^{\circ}C$, but it was not so good as the one at 7$^{\circ}C$, 95%RH. Consequently storage conditions of 12$^{\circ}C$, 95%RH was observed the best effecive condition for keeping rhizomes in good quality from weight loss, spouting, mouldiness and so on.

• Journal of Aquaculture
• /
• v.9 no.4
• /
• pp.377-384
• /
• 1996

A 15-week of growth trial was conducted to evaluate practical diets for growing Korean rockfish (Sebastes schlegeli). Two replicate groups of the fish average weighing 125 g were fed one of four experimental diets containing $41\~45\%$ protein and $6\~8\%$ lipid. A control diet with $58\%$ fish meal as protein source was included and practical form diets with $40\%$ fish meal and various practical ingredients such as meat meal, blood meal, soybean meal, and corn gluten meal were included. These experimental dry pellet diets were compared with commercial diets containing $51\~53\%$ protein and $5\~13\%$ lipid for marine fish or raw fish-based moist pellet (RMP) diet containing $58\%$ protein and $9\%$ lipid consisted of $50\%$ frozen horse mackerel and $50\%$ commercial binder meal. Weight gain, feed efficiency, daily feed intake and protein efficiency ratio in the fish fed the experimental diets and commercial diets were not significantly different to those in the fish fed the control diet. However weight gain, feed efficiency and protein efficiency ratio in the fish fed the RMP diet were significantly higher than those in the fish fed the experimental diets and commercial diets. These differences of growth performance between experimental diets and RMP diet may be reason for different dietary protein and energy levels. The experimental diet can save up to $20\%$ cost of fish production compare with control diet, whereas RMP diet is more expensive than other diets in the fish production.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.47 no.3
• /
• pp.201-205
• /
• 2002

This study was carried out to investigate storability and develop suitable storage method for barley. Rough and milled barley such as Olbori(covered barley), Ssalbori(naked barley) and Chalssalbori (waxy naked barley) were packaged in 3P bag and OPP film bag, respectively, and stored at ambient and low temperature warehouse conditions. The weight loss was higher in milled barley than that of rough barley during barley storage. Acid value, one of the most important factor for grain quality evaluation, was increased from 4.9-9.0 mg KOH/100g to 6.5-19.9mg KOH/100g in milled barley at 16 months after storage. Reducing sugar content was increased while germination and water absorption rates were decreased during barley storage period. In terms of penal taste of boiled barley, rough barley could be stored safely more than one year regardless of storage methods where-ase milled barley stored in ambient temperature ware-house produced nasty flavor at 8 to 10 months after storage.

• The Journal of Engineering Geology
• /
• v.17 no.3
• /
• pp.425-434
• /
• 2007

In this paper, the stability standards of slopes reclaimed by soils mixed with stone dust were proposed to manage the stone dust as recovery soils. First of all, the mixed ratio between stone dust and natural soil is classified into 5 groups, and a series of soil test was performed in each group. As the results of tests, the shear strength and the maximum dry unit weight were increased in decrease of the mixed ratio of stone dust. On the basis of the investigation to the safety factor standards of embankment slopes in and outside the country, a slope stability rank of slopes reclaimed by mixed soils were divided into 3 stages such as unstable stage, attention stage and stable stage. The slope angle, the slope height and the mixed ratio with stone dust were proposed by the result of stability analysis of slopes reclaimed by mixed soils. As the result of slope stability analysis, the slope angle of 1 : 1.8 at the reclaimed slope should be constructed in case of the slope height of 10 m. Also, the slope angle of 1 : 1.8 and the mixed ratio of stone dust less than 50% should be constructed in case of the slope height of 15 m. The analysis result of reclaimed slope constructed inside the quarry is similar to that of reclaimed slope constructed on the open ground in same conditions of the slope angle, the slope height and the mixed ratio with stone dust. The proposed stability standards of slopes reclaimed by soils mixed with stone dust can be used practically at the quarrying site.

• Journal of the Korean GEO-environmental Society
• /
• v.17 no.12
• /
• pp.17-26
• /
• 2016

The experimental investigation aims at developing controlled low strength materials (CLSM) using a self-cementitious fly ash (FA) as a binder and a bottom ash (BA) as a aggregate. The fly ash and bottom ash used in this study were obtained from a circulating fluidized bed combustion boiler (CFBC) which produces relatively high CaO containing fly ash. To find the optimum mixing condition satisfying flow consistency and unconfined compression strength (UCS), the CLSM specimens were prepared under various mixing conditions, including two types of aggregate and different weight fractions between fly ash and aggregate. Additionally, the prepared specimens were evaluated using a scanning electron microscope (SEM) and X-ray diffraction (XRD). The results of this study demonstrate that the water content satisfying flow consistency ranges from 42% to 85% and the flowability is improved with increasing the fraction of aggregate in whole mixture. The USC ranges from 0.3 MPa to 1.9 MPa. The results of UCS increases with increasing the fraction of aggregate in FA-sand mixtures, but decreases with increasing the fraction of aggregate in FA-BA mixtures. SEM images and XRD patterns reveal that the occurrence of both geopolymerization and hydration. The results of this study demonstrate that CFBC fly ash could be used as an alternative binder of CLSM mixtures.

• Journal of Korean Society of Forest Science
• /
• v.21 no.1
• /
• pp.1-34
• /
• 1974

The author intended to investigate external and internal changes in the cone structure, changes in water content, sugar, fat and protein during the period of seed maturation which bears a proper germinability. The experimental results can be summarized as in the following. 1. Male flowers 1) Pollen-mother cells occur as a mass from late in April to early in May, and form pollen tetrads through meiosis early and middle of May. Pollen with simple nucleus reach maturity late in May. 2) Stamen number of a male flower is almost same as the scale number of cone and is 69-102 stamens. One stamen includes 5800-7300 pollen. 3) The shape is round and elliptical, both of a pollen has air-sac with $80-91{\mu}$ in length, and has cuticlar exine and cellulose intine. 4) Pollen germinate in 68 hours at $25^{\circ}C$ with distilled water of pH 6.0, 2% sugar and 0.8% agar. 2. Female flowers 1) Ovuliferous scales grow rapidly in late April, and differentiation of ovules begins early in May. Embryo-sac-mother cells produce pollen tetrads through meiosis in the middle of May, and flower in late May. 2) The pollinated female flowers show repeated divisions of embryo-sac nucleus, and a great number of free nuclei form a mass for overwintering. Morphogenesis of isolation in the mass structure takes place from the middle of March, and that forms albuminous bodies of aivealus in early May. 3. Formation of pollinators and embryos. 1) Archegonia produce archegonial initial cells in the middle and late April, and pollinators are produced in the late April and late in early May. 2) After pollination, Oespore nuclei are seen to divide in the late May forming a layer of suspensor from the diaphragm in early June and in the middle of June. Thus this happens to show 4 pro-embryos. The organ of embryos begins to differentiate 1 pro-embryo and reachs perfect maturation in late August. 4. The growth of cones 1) In the year of flowering, strobiles grow during the period from the middle of June to the middle of July, and do not grow after the middle of August. Strobiles grow 1.6 times more in length 3.3 times short in diameter and about 22 times more weight than those of female flower in the year of flowering. 2) The cones at the adult stage grow 7 times longer in diameter, 12-15 times shorter diameter than those of strobiles after flowering. 3) Cone has 96-133 scales with the ratio of scale to be 69-80% and the length of cone is 11-13cm. Diameter is 5-8cm with 160-190g weight, and the seed number of it is 90-150 having empty seed ratio of 8-15%. 5. Formation of seed-coats 1) The layers of outer seed-coat become most for the width of $703{\mu}$ in the middle of July. At the adult stage of seed, it becomes $550-580{\mu}$ in size by decreasing moisture content. Then a horny and the cortical tissue of outer coats become differentiated. 2) The outer seed-coat of mature seeds forms epidermal cells of 3-4 layers and the stone cells of 16-21 layers. The interior part of it becomes parenchyma layer of 1 or 2 rows. 3) Inner seed-coat is formed 2 months earlier than the outer seed-coat in the middle of May, having the most width of inner seed-coat $667{\mu}$. At the adult stage it loses to $80-90{\mu}$. 6. Change in moisture content After pollination moisture content becomes gradually increased at the top in the early June and becomes markedly decreased in the middle of August. At the adult stage it shows 43~48% in cone, 23~25% in the outer seed-coat, 32~37% in the inner seed-coat, 23~26% in the inner seed-coat and endosperm and embryo, 21~24% in the embryo and endosperm, 36~40% in the embryos. 7. The content compositions of seed 1) Fat contents become gradually increased after the early May, at the adult stage it occupies 65~85% more fat than walnut and palm. Embryo includes 78.8% fat, and 57.0% fat in endosperm. 2) Sugar content after pollination becomes greatly increased as in the case of reducing sugar, while non-reducing sugar becomes increased in the early June. 3) Crude protein content becomes gradually increased after the early May, and at the adult stage it becomes 48.8%. Endosperm is made up with more protein than embryo. 8. The test of germination The collected optimum period of Pinus koraiensis seeds at an adequate maturity was collected in the early September, and used for the germination test of reduction-method and embryo culture. Seeds were taken at the interval of 7 days from the middle of July to the middle of September for the germination test at germination apparatus.

• Journal of Animal Science and Technology
• /
• v.50 no.5
• /
• pp.695-704
• /
• 2008

This study was conducted to investigate effects of dietary crude protein(CP) level and supplementation of conjugated linoleic acid(CLA) on growth performances and meat quality parameters in finishing pigs. The experiment was designed using protein levels(11.3%, 16.0%) and CLA levels(0%, 2.5%) according to 2×2 factorial design. A total of forty-eight pigs [(Landrace×Yorkshire)×Duroc] with an average initial weight of 79±1kg were allotted to one of four dietary treatments. Each treatment had four replications of three pigs per replicate. Final body weight(P<0.05) and average daily gain(P<0.01) were lower in 11.3% CP treatments than in 16.0% CP treatments, while feed/gain was high(P<0.01) in 11.3% CP treatments compared with 16.0% CP treatments. Carcass weight was lighter in 11.3% CP treatments(P<0.001) and CLA 2.5% treatments(P<0.01) than in 16.0% CP and CLA 0% treatments, respectively. A significant interaction between CP and CLA on carcass weight was observed(P<0.01), where supplementation of 2.5% CLA to finishing diets decreased carcass weight in 16.0% CP treatments, while no difference was found in 11.3% CP treatments. Backfat thickness was thinner in 11.3% CP treatments and CLA 2.5% treatments than in 16.0% CP and CLA 0% treatments, respectively(P<0.05). A significant interaction between CP and CLA on backfat thickness was observed(P<0.001), where supplementation of 2.5% CLA to finishing diets decreased backfat thickness in 16.0% CP treatments, while no difference was found in 11.3% CP treatments. Marbling score and intramuscular fat contents were higher in 11.3% CP treatments than in 16.0% CP treatments(P<0.01). In conclusion, feeding of protein-deficient diets in finishing pigs could produce favorable pork with high marbling score and thinner backfat. On the other hand, supplementation of CLA was considered to decrease backfat thickness when diets with optimal level of crude protein were fed to finishing pigs.