• Journal of the Korea Institute of Military Science and Technology
• /
• v.19 no.4
• /
• pp.526-535
• /
• 2016

In this study, the estimating weight data of eight leading ships of Korea navy were processed by comparing with the final weight data of their incline test results statistically, and are analyzed as follows; The maximum criteria of the weight margins of Korea naval ship in the preliminary and detailed design phases seem to be appropriate values, but the minimum criteria would be advisable to update more reasonable values. And, the limitation that the acceptable deviation of lightship weight should be 10 % of the lightship weight on a naval ship's ROC(Required Operational Capabilities) is recommended to be prohibited, because it comes from the weight estimation which has considerable uncertainty and it may also drop off design flexibility. Finally, the SWBS(Ship Work Breakdown System) groups which have larger deviation values in the estimating weight of naval ships are necessary to improve their accuracies, and to upgrade their weight database continuously.

• Journal of the Computational Structural Engineering Institute of Korea
• /
• v.28 no.1
• /
• pp.29-37
• /
• 2015

In this study, the estimation of axial load and total axial load was conducted using Bridge Weigh-in-Motion(BWIM) technique which generally consists of devices for measuring the strain induced in the bridge by the vehicles. axle detectors for collecting information on vehicle velocity and axle spacing. and data acquisition equipment. Vehicle driving test for the development of the BWIM system is necessary but it needs much cost and time. In addition, it demands various driving conditions for the test. Thus, we need a numerical-simulation method for resolving the cost and time problems of vehicle driving tests, and a way of measuring bridge response according to various driving conditions. Using a bridge model reflecting the dynamic characteristic contributes to increased accuracy in numerical simulation. In this paper, we conduct a numerical simulation which reflects the dynamic characteristic of a bridge using the Bridge Weigh-in-Motion technique, and suggest overload vehicle enforcement technology.

• The Korean Journal of Malacology
• /
• v.23 no.2
• /
• pp.217-225
• /
• 2007

This study was conducted to estimate the general genetic parameters, heritabilities, and genetic and phenotypic correlations on growth-related traits by studying multiple trait animal model in two Korean abalone species, Haliotis discus hannai and H. discus discus. The data was collected from the records of 3,795 individuals produced from 54 sires and 74 dams in Haliotis discus hannai and 399 individuals produced from 7 sires and 7 dams in Haliotis discus discus. The data was evaluated by the Genetics and Breeding Research Center, National Fisheries Research & Development Institute (NFRDI). Genetic parameters were estimated for two abalone species raised in Bukjeju branch, NFRDI, from May 20 to November 1, 2004. The heritability estimates for growth traits of shell length, shell width and body weight obtained from restricted maximum likelihood (REML) were ranging from 0.73 to 0.78 in Haliotis discus hannai, and from 0.87 to 0.89 in H. discus discus. The heritabilities for shell shape and condition factor were ranging from 0.17 to 0.20 in Haliotis discus hannai, and from 0.01 to 0.45 in H. discus discus. Genetic and phenotypic correlations were over than 0.96 between shell parameters and weight in both of abalone subspecies, indicating that breeding for weight gains could successfully be achieved by selecting for shell length.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.46 no.9
• /
• pp.723-734
• /
• 2018

A structural weight estimation methodology for the multicopter design process is presented. In general, a multicopter is composed of an airframe, motors, propellers, battery and so on. Among these, the weight of motors, propellers and battery can be obtained from the weight trends with respect to design parameters. However, the structural weight is hard to be estimated due to the various configurations and design concepts of multicopters. Moreover, the airframe weights of most commercial multicopter products are not provided. Thus, an accurate airframe weight model is required for the reliable mutlcopter design process. Firstly, the standard configuration of multicopters is defined. Then, we proposed the structural weight estimation method using the number and diameter of propellers determined from the initial step of sizing process. Finally, we validated our suggested method using the commerical products.

• The Korean Journal of Rheology
• /
• v.3 no.1
• /
• pp.38-46
• /
• 1991

저분자량(분자량: 1.04$\times$104 g/mole)과 고분자량(3.84$\times$106) 폴리스타이렌 브렌드를 제조하고 무접촉 무마찰을 이용한 비틀림 크립장치를 사용하여 점도, 크립 캄플라이언스들 을 측정하고 또 지연 스펙트라도 계산해 내었다. 고분자량의 농도는 0, 2, 10, 20, 50, 70, 100 중량 퍼센트였다. 점도는 블렌드의 중량평균 분자량이 임계분자량이상이면 중량평균의 3.5승에 비례했다. 중량평균 분자량>임계분자량 인블렌드의 경우 정상상태 회복 캄플라이언 스는 중량평균의 3.5승에 비례했다. 중량평균 분자량>임계분자량 인 블렌드의 경우 정상상 태 회복 캄플라이언스는 중량평균의 -2.3승에 비례했다. 지연스펙트라를 검토한 결과 폴리 스타이렌의 임계분자량은 38000 g/mole 쯤으로 추정되었다.

• Journal of Korean Society of Transportation
• /
• v.19 no.6
• /
• pp.119-129
• /
• 2001

본 연구는 국내의 화물차(이하 트럭) 특성, 도로 조건과 주행 저항이 고려된 트럭 성능 곡선 산출식의 매개변수를 추정하기 위하여 수행되었다. 이를 위해 국내 대표트럭을 선정하고 경사지 진입속도를 산출하였다. 국내 대표트럭의 선정은 자동차 등록현황 자료를 토대로 하여 트럭 중량/마력비에 대한 누적 분포를 작성하고 이 중에서 주요 차종(적재 중량 11톤 이상)의 총중량은 과적 검문소 자료로 보정하여 이루어졌다. 경사지 진입속도는 도별 평지부 직선 구간을 한 곳씩 선정하여 4차로도로와 2차로도로에서 수집되는 자료를 분석하여 산출하였다. 트럭 성능 곡선 산출식을 정립하기 위해 오르막 한계속도$(V_x)$ 산출식을 정리한 뒤 총중량(W), 엔진성능(P), 경사도(G)는 독려 변수로 k, $f_{rc}$, $f_{rv}$, $\Phi$는 매개변수로 설정하였다. 현장조사를 통해서 오르막 한계속도에 도달한 트럭의 총중량과 엔진성능, 속도, 경사도 등의 자료를 수집하여 매개변수 산출에 이용하였다. 마지막으로 추정된 매개변수를 이용하여 트럭 성능 곡선을 도출하였다.

• Journal of the Society of Naval Architects of Korea
• /
• v.48 no.5
• /
• pp.426-434
• /
• 2011

Accurate weight prediction methods are an essential of the ship design in both ship cost managements and performance satisfactions. When no parent or similar ships are available, an adequate method of the ship weight estimating is required. In this study, there was carried out to develop the ship weight estimating method for the preliminary design phase. The weight estimating methods were first surveyed by the references and summarized their characteristics. The weight estimation method by statistical approach was developed for the container ship because the containerized transportation markets is gradually growing and ship's size and loading capacity are rapidly enlarged. The correlation analysis and the multiple regression analysis were used for developing the weight estimating method. As a results of evaluating the developed method, the error ratio of the variation between estimated weight and ship's data was about 5%. And it was only 1% difference with the calculating weight of conceptual design results by shipyard design team that the estimating weight of ultra-large container ship was predicted by the developed method.

• Journal of the Society of Naval Architects of Korea
• /
• v.33 no.4
• /
• pp.97-105
• /
• 1996

For the minimum weight design of ship structures it is desirable that tank arrangement is predetermined to obtain the minimum weight and then structural arrangement and scanting of each murder is determined to obtain the minimum weight within the given tank arrangement. To carry out the tank arrangement to give minimum weight a minimum weight design program which covers whole ship structures is developed by the combination of minimum weight design program of longitudinal members by classification rules and minimum weight design program of transverse members by generalized slope deflection method which were developed by the authors. The hullweight is estimated by summation of the weight of cargo hold part and the weight except cargo hold part which can be estimated by the empirical formula. In this study, the variation of hullweight is shown with the number of tank, the number of web and the location of longitudinal bulkhead. For the application of actual design alternative designs of tank arrangement which satisfy MARPOL regulation are determined. And several minimum weight designs of whole ship structures are carried out to obtain the tank arrangement which gives minimum weight and then the hullweight is compared with that of existing ship.

• Journal of Korea Water Resources Association
• /
• v.52 no.7
• /
• pp.493-503
• /
• 2019

This study presents a new method of estimating the size distribution of river bed gravel through image processing. The analysis was done in two steps; first the individual grain images were analyzed and then the grain particle segmentation of river-bed images were processed. In the first part of the analysis, the relationships (long axes, intermediate axes and projective areas) between grain features from images and those measured were compared. For this analysis, 240 gravel particles were collected at three river stations. All particles were measured with vernier calipers and weighed with scales. The measured data showed that river gravel had shape factors of 0.514~0.585. It was found that the weight of gravel had a stronger correlation with the projective areas than the long or intermediate axes. Using these results, we were able to establish an area-weight formula. In the second step, we calculated the projective areas of the river-bed gravels by detecting their edge lines using the ImageJ program. The projective areas of the gravels were converted to the grain-size distribution using the formula previously established. The proposed method was applied to 3 small- and medium- sized rivers in Korea. Comparisons of the analyzed size distributions with those measured showed that the proposed method could estimate the median diameter within a fair error range. However, the estimated distributions showed a slight deviation from the observed value, which is something that needs improvement in the future.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.31 no.4D
• /
• pp.511-518
• /
• 2011

Truck weight data are essential for road infrastructure design, maintenance and management. WIM (Weigh-In-Motion) system provides highway planners, researchers and officials with statistical data. Recently high speed WIM data also uses to support a vehicle weight regulation and enforcement activities. This paper aims at developing axle load estimating models with high speed WIM data collected from national highway. We also suggest a method to estimate axle load using simple regression model for WIM system. The model proposed by this paper, resulted in better axle load estimation in all class of vehicle than conventional model. The developed axle load estimating model will used for on-going or re-calibration procedures to ensure an adequate level of WIM system performance. This model can also be used for missing axle load data imputation in the future.