• Journal of the Society of Disaster Information
• /
• v.19 no.4
• /
• pp.950-957
• /
• 2023

Purpose: The response technology is needed to prevent the spill of highly toxic oil contaminants in advance. Therefore, this paper described the results of an experimental study to predict the engineering properties of the developed reactive material. Method: Compaction tests and spectral information acquisition experiments were conducted on the reactive materials, and the results were evaluated. In addition, the correlation between spectral information and maximum dry unit weight was analyzed to evaluate the possibility of predicting the engineering properties for reactive materials. Result: The compaction test results showed that the maximum dry unit weight was in the range of approximately 9kN/m³ to 10kN/m³. The spectral information confirmed that the maximum reflectance decreased as the polynorbornene decreased. Conclusion: It was confirmed that the maximum dry unit weight of the reactive material for absorbing oil contaminants can be predicted using the maximum reflectance according to the component ratio of the reactive material.

• Journal of the Korean GEO-environmental Society
• /
• v.13 no.4
• /
• pp.53-59
• /
• 2012

In this study, strength and durability of a geo-polymer grout material(HIT) was investigated through unconfined compression strength tests(UCS)), scanning electron microscope(SEM), elution tests, and surface observations. UCS tests showed high initial strength and rapid continuous strength increments when compared to labile wasser glass(LW) and space grouting rocket system (SGR) grout materials, which showed strength reduction after 28 days. The higher strength was also reflected in SEM results which showed calcium silicate hydroxide(C-S-H) gels of the dense hydrate range, indicating higher strength and durability. Additionally, elution tests and grout surface observations showed HIT was in good condition and the decrease in weight was minor when under water for six months. LW and SGR showed the grout surface to be constricted and lower durability due to higher weight increase. These results and observations show HIT to be better suited for coastal structural applications than LW and SGR in long terms of strength and durability.

• 한국포장학회:학술대회논문집
• /
• 2006.11a
• /
• pp.95-101
• /
• 2006

거창사과원예협동조합에서 구입한 사과 600상자를 5% $CaCl_2$ 용액에 각각 15분간 침지하는 방법으로 전처리 후 24시간 건조시키고 무포장구, $25{\mu}m$ 두께의 기능성 MA 필름으로 포장한 포장구와 무처리 무포장구인 대조구로 나누어 $0^{\circ}C$의 저온저장고로 옮겨 7개월 동안 저장하면서 3주 간격으로 품질을 분석하였다. 저장 기간이 증가할수록 중량 감소율은 Control 구보다 $CaCl_2$구와 $CaCl_2+MA$구의 중량 감소율이 월등히 낮았다. 경도변화는 저장 기간이 증가할수록 감소하는 경향을 보였으며, 그 중 $CaCl_2$구는 초기치 0.97 $kg_f$에서 저장 18주에는 0.95 $kg_f$로 초기치에 비해 2%의 가장 적은 변화를 보였다. 산도는 대조구보다 처리구의 산도가 높게 나타났으나 큰 차이는 나타나지 않았다. 가용성 고형분 함량은 저장 기간 모든 실험구에 따른 큰 차이가 없었다. 비타민 C 함량은 저장기간이 지날수록 모든 실험구에서 감소하는 경향을 보였으며, 기호도 조사에서 $CaCl_2$구와 $CaCl_2+MA$구가 대조구보다 유의적으로 높게 나타났다.

• Journal of the Korean Wood Science and Technology
• /
• v.33 no.3 s.131
• /
• pp.30-37
• /
• 2005

This study aimed at offering basic data to develop a new use of sawdust and rice husk. Research investigated the variation of density, weight loss and dimensional decreasing rate by the percentage of resin impregnation and carbonization temperature of ceramics, which were formed by the percentage of resin impregnation of 40~80% and carbonization of $600{\sim}1200^{\circ}C$ with board impregnated with phenolic resin made from sawdust and rice husk. The results of this study were as follows:1) As the percentage of resin impregnation increased, the thickness shrinkage and weight loss were decreased; on the other hand, density and modulus of rupture increased. Meanwhile, the carbonization temperature at $1200^{\circ}C$ showed the highest values, as the density was $0.81g/cm^3$ and the bending strength was $77.9kgf/cm^2$ in the percentage of resin impregnation at 70%. 2) As the carbonization temperature grew higher the linear shrinkage, thickness shrinkage and weight loss increased while the density increased until the carbonization temperature of $1000^{\circ}C$; but then decreased slightly at $1200^{\circ}C$.

• Journal of the Korea Concrete Institute
• /
• v.14 no.5
• /
• pp.789-795
• /
• 2002

To evaluate the bind rate and behavior of two types chloride ion-one is the chloride ion added in mixture when un-washed sea sand is used as fine aggregate, one is the chloride ion admitted in the new version of concrete standard specification, pore solution extracted in cement paste were analyzed. The results are follow. 1 As passing the time, the chloride concentration in the pore solution decreases with the Increase in the chloride content absorbed by the hydrate products. As compared with chloride contents in mixing water, the bound ratio of chloride at 49 days is 64∼90％. 2. The bound ratio of chloride in cement paste considering evaporable water as pore solution is obtained. In case of Pl∼P3(added chloride content wt of cement 0.046∼0.16 ％), the bound ratio of chloride is 91.8∼93.5 ％. P4(added chloride wt of cement 0.3％) is 89.1％, but P5(added chloride wt of cement 0.617％) bound is only 77％. 3. The bound ratio of chloride to wt of cement is 0.015∼0.475％ with adding chloride. In case chloride added over 0.091 ％ wt of cement, the bound chloride content increases 1.7∼1.8 times in spite of added chloride increase twice. The bound ratio of chloride to wt of cement decreased with the increase in the chloride content. 4. The more increase added chloride content, the more increase the bound ration of chloride. But the absolute value of chloride content in pore solution increased.

• The monthly packaging world
• /
• s.222
• /
• pp.58-63
• /
• 2011

포장재별로 처리한 콩나물의 저장 중 품질변화를 살펴보았다. 중량 감소율은 OPP필름에 비해 PLA 필름이 더 높은 것으로 나타났으나 0.025% 이하의 감소율로 큰 차이를 보이진 않았다. 수분함량의 경우 P3 포장구가 다른 처리구 보다 가장 적은 감소율을 보였으며, 총균수 변화에서는 P2, P3 포장구가 가장 적은 증가율을 나타내었으며, 외관상태에서 OPP 포장구는 봉투 개봉시 모든 포장구에서 부패취가 발생하였다. 비타민C 함량 변화는 PLA2 포장구가 변화율이 적었으며, PLA3 필름구가 그 다음으로 나타났으며, 기호도 조사에서는 PLA2 포장구가 모든 항목에서 높은 점수를 나타냈다. 결과적으로 OPP 포장구 보다는 PLA 포장구의 변화가 적었음을 알 수 있었으며, 그 중PLA2와 PLA3 필름이 콩나물 저장에 가장 효과적임을 알 수 있었다.

• Journal of the Korean Wood Science and Technology
• /
• v.33 no.3 s.131
• /
• pp.38-44
• /
• 2005

This research investigated the variation of density, the weight loss, dimensional shrinkage and heat conduction by the heating rate and keeping time at maximum temperature of woodceramics, when sawdust boards made from thinned logs of Pinus densiflora, Larix kaemferi and Pinus koraiensis were impregnated with phenol-formaldehyde resin, and then were formed by heating rate ($2^{\circ}C/min{\sim}6^{\circ}C/min$) and keeping time at maximum temperature (1~5 h). As the heating rate increased, the density and thickness shrinkage decreased, but weight loss and linear shrinkage increased. The more the keeping time at maximum temperature, the greater the linear shrinkage and thickness shrinkage. The heating conduction was superior at the heating rate is $2^{\circ}C/min$ and the keeping time at maximum temperature of 2 hs.

• Korean Journal of Plant Resources
• /
• v.8 no.3
• /
• pp.259-264
• /
• 1995

To elucidate the effect on the quality of products, various components of ume fruit(Prunus mume)flesh of six species during development and maturation. The weigh and the rate of flesh of ume fruit was increased until maturation, except of small ume. The relative hardness of ume fruit flesh was 2.5~3.9 Kg and decreased at full ripe. The major organic acids of ume fruit flesh was citric acid and malic acid. Citric acid became increased, but malic acid was decreased during maturation and total content of that was increased during maturation Free sugars determined from the ume fruit flesh were fructose, glucose, sucrose. Ascorbic acid content was $0.6\sim2mg%$ in the ume fruit flesh. The contents of K and Ca were abundant minerals in ume fruit flesh.

• Journal of the Korean Society of Tobacco Science
• /
• v.1 no.2
• /
• pp.127-137
• /
• 1979

Three factors affecting cigarette weight, tobacco shreds length(cut width 0.9mm), moisture content and filling grower were studied for domestic brands. The results were obtained as follows. 1. When the moisture contents war법 changed by one per cent consecutively. filling power of tobacco shreds and cigarette weight were changed by 3.9 - 7.9 per cent for the former and by 5.7 - 7.6 per cent for the later. The longer the length of tobacco, shreds, the wider are the changing radios, and vice versa. 2. At constant moisture content (12 %), filling Power and cigarette weight were varied by 3.8- 22.8 per cent and by 2.9-29.4 per cent respectively due to the fluctuation of tobacco shreds length, The range of this variation was increased by reducing moisture content , and was decreased by increasing the moisture content. 3. The higher the blending ratio of shreds longer than 2 mm, the lower are the cigarette weights. 4. The operation standard weight of domestic brands was found 1- 9 per cent higher compared with the observed optimal cigarette weight in this study.

• Magazine of the Korean Society of Agricultural Engineers
• /
• v.26 no.3
• /
• pp.100-107
• /
• 1984

농축산 배설물을 호기성 환기처리하여 토양에 환원이용을 목적으로 컴포스트(Compost)화 할 때에 공극률(Pore space)에 미치는 물리적인 자 성설의 상화관계를 공명하고져 실험을 수행하였다. 본 연구는 여러가지 수준의 압축력에 따른 첨가 재료의 공극률 변화 과정 측정하고 이와 동시에 서로 다른 5종류의 재료별 입자 크기에 대하여 영수률, 용적 중량, 용적 밀도 및 입자 대소가 공극률에 미치는 영향을 조사분석 하였으며 그 결과는 아래와 같다. 1. 세립자 재료의 용적 밀도는 세립자보다 더욱 크게 나타났다. 2. 염수률과 용적 중량이 증가하면 용적밀도는 커지나 공극률은 감소하였다. 3. 공극률은 영수률과 용적 중량보다 첨가재료의 입자크기와 대소분포에 더욱 커다란 영향을 받고 있었다. 4. 영수률이 55~65%이고, 용적중량이 0.25~0.38g/cm2이며 입자크기가 1.5~5cm인 범위내의 효율적인 콤포스트화에 있어서 공극률은 65~80%의 범위를 형성하고 있음을 알 수 있다.