• Journal of the Mineralogical Society of Korea
• /
• v.32 no.4
• /
• pp.303-312
• /
• 2019

In this study, X-ray diffraction, ICP analysis, and leaching experiments were performed to analyze the heavy metals and dissolution characteristics of Andong dam sediments. As a result of X-ray diffraction analysis, Andong dam sediment consists of quartz, plagioclase, chlorite and illite. ICP analysis of sediment showed very high concentrations of As and Cd. Leaching experiments were performed in aerobic and anaerobic condition in a disturbed state. The results of leaching experiment showed that more heavy metals were leached in aerobic than anaerobic conditions. Heavy metal that increased in concentration with time in aerobic conditions were Mn, Zn and Cd, and those in anaerobic conditions were Mn, Fe and As. The leaching ratio of heavy metal concentration in sediment was Mn > Cd > Zn > Ni > Cu > As > Pb ≒ Fe ≒ Cr and Mn > As > Cu > Ni > Zn > Pb ≒ Cd ≒ Fe ≒ Cr in aerobic and anaerobic conditions, respectively.

• Proceedings of the Korea Society for Energy Engineering kosee Conference
• /
• 1996.10b
• /
• pp.123-128
• /
• 1996

Bench Scale급 건식 가스화기에서 중국 Datong탄과 미국 Alaska Usibelli탄으로부터 생성된 Slag의 구조적인 특성과 화학적인 특성을 조사하였다. Datong slag은 표면이 매끄럽고 검으며 속이 약간 비어 있는 구형을 띄고 있고 Alaska Usibelli탄으로부터의 slag은 속이 조밀하게 차여있는데, 이들 slag의 내부는 Datong, Alaska Usibelli탄 두 경우 다 회분이 결정화된 형상의 특징을 보여주고 있다. 그리고 Cu, Zn외 11가지 중금속이 slag에 다량으로 농축되어 제거되었음을 알 수 있었으며, slag들의 침출여부를 조사하기 위하여 용출시험을 수행한 후 용출액에 대하여 중금속 분석을 한 결과 대부분 중금속들은 검출되지 않았다. 내화재의 주성분인 Cr이 slag에 포함되어 나오는 것으로 측정되었으나 용출시험 결과 검출이 안되어 2차오염에는 전혀 문제가 없음이 입증되었다. 따라서 건식 가스화기로부터 생성된 slag을 재사용할 때, 용출되는 중금속에 관한 2차 환경오염이 유발되지 않을 것으로 확인되었다.

• Proceedings of the KSEEG Conference
• /
• 2005.04a
• /
• pp.190-191
• /
• 2005

• Journal of the Korea institute for structural maintenance and inspection
• /
• v.16 no.4
• /
• pp.122-129
• /
• 2012

In this study, environmental problems(i.e., pH elevation and $Cr^{6+}$ detection) occurred by using the cement grout made from CA(calcium aluminate) were evaluated using viscosity agents(MC, chelate polymer). Ordinary portland cement and blaste-furnace slag cement were used by main materials and ACC(blended mixture of calcium aluminate) were used by accelerator for hardening of grout. In addition, viscosity agents were used for preventing pH elevation and heavy metal detection from grouting materials. From the results, it was noted that when chelate polymer was used, pH elevation and $Cr^{6+}$ detection were minimized. However, other cases showed higher pH elevation and $Cr^{6+}$ detection. At test 1 day, $Cr^{6+}$ detection with age presented over 97% of total value and, after that, additional increase was not distinct. As a result of this study, it was acknowledged that, to control pH elevation and heavy-metal (like $Cr^{6+}$) detection, the usage of BSC and chelate polymer is a very useful fact.

• Applied Chemistry for Engineering
• /
• v.16 no.2
• /
• pp.180-186
• /
• 2005

This paper discusses the development of mixtures for silica fume as a stabilization/solidification agent and a binder for industrial wastewater residue containing organic and heavy metal contaminants. The UCS (unconfined compressive strength) gradually increased to 66.7% as the silica fume content increased to 15%. The leaching of TOC (total organic carbon) and chromium decreased as more OPC (Ordinary Portland Cement) was substituted with the silica fume. When a mixture had 5% silica fume, it retained about 85% TOC, and chromium leached out 0.76 mg-Cr/g-Cr in acidic solution. Also, microstructural studies of the solidified analysis showed that the silica fume caused an inhibition to the ettringite formation which did not contrilbute to setting but coated the cement particles and retarded the setting reactions. The results indicated that the incorporation of silica fume into the cement matrix minimized the detrimental effects of organic materials on the cement hydration reaction and the contaminant leachability.

• Journal of the Korean Crystal Growth and Crystal Technology
• /
• v.16 no.2
• /
• pp.76-81
• /
• 2006

The leaching behavior of heavy metal ions with pH and colloid/interface property was analyzed by ICP and SEM. The heavy metals in EAF dust are 'amphoteric metal' and the heavy metal ions leached a little at pH 10. And the leaching concentrations of heavy metals at pH 12 were higher than the that at pH 8. The leaching concentrations of heavy metal ion were decreased with adding the clay to the EAF dust. Especially, the leaching concentrations of heavy metal ion were effectively decreased at pH 12. The observation of colloid/interface properties shows that the soluble silicon hydroxide from clay at pH 12 was precipitated at the surface of the heavy metal and clay particles. This silicon hydroxide precipitates were named the PSHP. The leaching concentrations of heavy metal ion were effectively decreased by the formation of PSHP when adding the clay to the EAF dust and controlling the pH of the slurry at 12.

• Journal of Korean Society of Environmental Engineers
• /
• v.22 no.7
• /
• pp.1357-1364
• /
• 2000

Our study was performed to evaluate the effect of leaching parameters including the physicochemical characteristics and the fractionated composition of heavy metals on the release of heavy metals in fly ash discharged from MSWI. Leaching parameters such as pH, CEC, particle size, and exchangeable fraction among the fractional composition classified by sequential extraction procedure are considered. The leaching rate of heavy metal released by KSLT method is largely dependent on the pH of fly ash. The effect of pH on the release of heavy metals is different from elements. It appears that the leaching rate of cadmium and copper decreases with increasing pH, while lead and zinc increases at the condition of neutral or strong alkali condition, which suggests that the leaching of heavy metals are limited by the solubility. It is found that the effect of CEC is similarly to that of pH, $D_{10}$ among the particle size of fly ash is negative correlated with the concentration of heavy metals leached by KSLT method. In the case of exchangeable fraction, the leaching rate of heavy metals is linearly correlated with the exchangeable fraction for the fly ash below 40 meq/l00g of CEC, but not related out of the range.

• Journal of Soil and Groundwater Environment
• /
• v.6 no.1
• /
• pp.63-83
• /
• 2001

Heavy metals are extracted from stream sediments, roadside soils and sediments and soils and tailings from mining area using partial extraction, acid digestion and HF-digestion. Compared to amounts of heavy metals extracted using partial extraction, those extracted using acid digestion are higher by 2.0∼221 times in Cu, 2.4∼2806 times in Pb, 1.3∼121 times in Cd, 14. 1∼1300885 times in Fe, 1.2∼272 times in Mn, 1.3∼373 times in Zn, 2.2∼1735 times in Cr. There is no special relationship between the extracted amounts of heavy metals using partial extraction and those using acid digestion. However, it is possible that there is a certain relationship between those using acid digestion and those using HF-digestion. Although partial extraction, which extracts less amounts of heavy metals (Cd, Cu, Pb) from soil compared to acid digestion, is used in domestic standard method for examination of soil, domestic soil standard for heavy metals in non-agricultural and industrial areas is higher than soil standard in foreign countries which use acid digestion. For improvement of the domestic standard method for assessment of soil, it is suggested to lower the domestic soil standard for heavy metals or to change pretreatment method for extracting heavy metals from partial extraction to acid digestion with modifying the soil standard.

• Journal of Korean Society of Environmental Engineers
• /
• v.30 no.2
• /
• pp.213-217
• /
• 2008

The objective of this research is to investigate the leaching characteristics of unregulated heavy metals such as Ni, Zn, Ba, Be, Sb, Se, V in specified waste. 108 waste samples which were taken from the representative facilities emitting hazardous substances, were analyzed. The rate of leaching of heavy metal was measured using an official test method. From the results, wastewater treatment sludge and dust contained much Ni, and Zn was detected in all samples. Dust and waste catalyst producted from petroleum-refining process tended to reveal V in high concentration. Ba, Be, Sb, Se showed low concentration, but require additional analyses of waste generated at different industries.

• Proceedings of the Korean Environmental Sciences Society Conference
• /
• 2008.11a
• /
• pp.443-446
• /
• 2008

본 연구는 과산화수소를 이용하여 디젤오염토양의 처리시 중금속 용출특성, 백연가스 발생특성 등을 평가하기 위하여 실험을 하였다. 중금속 용출속도는 반응시간 15분까지 용출이 지속적으로 증가하다가, 15분 이후 점차적으로 감소하는 경향을 보였다. 이러한 과산화수소(H$_2$O$_2$) 처리방법은 토양내 중금속 용출속도를 가속화시켜 실제 현장에서 적용될 경우 이로 인하여 지하수에 심각한 영향을 미칠 수 있으므로 ex-situ 방법 등과 같은 방법을 고려한 2차 오염에 대한 대책이 필요할 것으로 판단된다. 또한, 백연가스의 발생량은 과산화수소의 농도가 높을수록 많이 발생하는 것으로 관찰되었으며, 이는 높은 농도의 과산화수소와 유류오염토양이 급격하게 반응하기 때문인 것으로 판단된다. 백연가스 중 Hexane이 가장 높은 농도로 검출되었으며, 이 외에도 Cyclopentane, Benzene, Ethylbenzene, m,p-Xylene, Undecane 등이 많이 발생하는 것으로 나타났다. 따라서 백연가스 중에 함유된 고농도의 휘발성유기화합물(VOCs)이 주변 환경에 유해한 영향을 미칠 것으로 예상되므로 적절한 대기오염방지시설을 설치하여 제거한 후 대기로 방출하는 것이 필요하다고 판단된다.