• Proceedings of the Mineralogical Society of Korea Conference
• /
• 2003.05a
• /
• pp.80-80
• /
• 2003

포천-기산리 일대에 분포하는 쥬라기의 대보화강암류의 변형정도를 결정하기 위해 석영의 파동소광의 강도(IWE : Intensity of Wavy Extinction)를 편광현미경, 디지털 카메라, NIH Image로 측정하였다. 파동소광이 나타나는 석영입자의 한 부분이 편광현미경 상에서 최대 소광이 될 때 IWE를 측정하고, 이 때 나타나는 파동소광의 아입자경계에 수직한 방향으로 측정을 시도하였다 본 연구에 사용된 NIH Image는 파동소광을 보여주는 각 부분의 광도를 256단계의 흑백 농담변화로 나타낼 수 있다. 이를 이용하여 측정 길이에 대한 농담변화로 IWE를 구하였다. 이렇게 획득한 IWE를 5$^{\circ}$ 단위로 묶어 돗수분포표로 처리하였으며, 자료의 분포특성상 히스토그램의 최빈값과 중간값 사이의 중간값을 그 암석의 대표 IWE로 정의하였다. 이를 다시 5단계의 변형대(무변형, 저변형, 중변형, 고변형, 최고변형)와 각각의 변형지수(D1, D2, D3, D4, D5)로 묶었다. 본 연구지역에 분포하는 화강암류는 흑운모화강암(Gb), 동부의 석류석흑운모화강암(Ggb) 그리고 북부의 복운모화강암(Gtm)으로 구성되어 있는 바 본 연구에는 크게 포천읍을 기준으로 서부에 분포하는 Gb와 동부에 분포하는 Ggb에서 파동소광의 강도 측정이 이루어 졌다. 연구결과 Gb는 D2 이하의 낮은 변형도가 나타났고, Ggb는 D3이상의 고변형이 나타나, 전반적으로 조사지역의 북서부에서 남동부로 갈수록 변형도가 증가하는 양상을 보여주었다.

• Proceedings of the Korean Society of Propulsion Engineers Conference
• /
• 1995.11a
• /
• pp.181-191
• /
• 1995

Al 7175 합금 형단조에서 주조조직 파괴를 위한 빌렛트제작(BM)공정과 ITMT공정 이 기계적 성질에 미치는 영향을 조사하였다. BM공정과 ITMT 공정을 동시 적용한 형단조품의 기계적 성질은 길이방향에서 인장강도가 10%, 연성이 50%, 충격흡수 에너지가 20% 증가되었고 횡방향에서도 인장강도가 7%, 연성이 9% 증가되었다. 이와 같은 기계적 성질의 향상은 BM과 ITMT공정을 동시 적용한 형단조품 미세조직의 결정립크기가 17$\mu\textrm{m}$로서 일반단조조직보다 3배이상 미세하고, 균일한 등축재결정 조직을 나타내는데 기인하는 것으로 판단된다.

• Journal of the Korea Society of Computer and Information
• /
• v.19 no.9
• /
• pp.33-38
• /
• 2014

The FCM based hybrid RBF network is a heterogeneous learning network model that applies FCM algorithm between input and middle layer and applies Max_Min algorithm between middle layer and output. The Max-Min neural network uses winner nodes of the middle layer as input but shows inefficient learning in performance when the input vector consists of too many patterns. To overcome this problem, we propose a dynamic learning rate control based on fuzzy logic. The proposed method first classifies accurate/inaccurate class with respect to the difference between target value and output value with threshold and then fuzzy membership function and fuzzy decision logic is designed to control the learning rate dynamically. We apply this proposed RBF network to the character recognition problem and the efficacy of the proposed method is verified in the experiment.

• The Korean Journal of Ecology
• /
• v.28 no.2
• /
• pp.99-103
• /
• 2005

Actual vegetation map drown with the scale 1 to 100 and Alnus japonica population in Ja-neup and Woong-neup of the Mujechi moor were described in order to monitor long-termly and preserve permanently, where is a very rare Molinietea moor and a legally protected area. A total of 3036 plots of 5m $\times$ 5m were surveyed during summer 1996. Thiessen polygons of 1491 alder trees were derived from the plot data. Actual vegetation map was illustrated by 6 cover types such as needle spike-rush type, moor-grass type, alder-moor type, eulalia type, oak forest type, and exposed site. Molinia grasses native to the moor and Miscanthus grasses alien to the moor are reciprocally dominant. The area of Molinia grasslands was rapidly in decline and alder population size was dramatically in increase in the moor, particularly in Woong-neup. In Molinietea moor preservation more attention should be focused on the regulation of a nutrient rich soil from forest road and fire.

• Proceedings of the Korean Information Science Society Conference
• /
• 2008.06b
• /
• pp.337-341
• /
• 2008

갈수록 복잡해지는 내장형 시스템을 개발함에 있어서 소프트웨어 개발의 중요성은 날로 커지고 있다. 기존 연구에서 소프트웨어 개발 효율을 높이기 위해 소프트웨어의 재사용 가능성을 높이고 병렬성 명세를 용이하게 하고자 중간단계코드(CIC)를 정의하였다. 이 중간단계 코드는 각 태스크의 순수 알고리즘을 기술하는 C형태의 태스크 코드와 그 외의 정보를 포함하는 XML형태의 아키텍쳐 정보 파일로 구성된다. 이 CIC는 사용자가 직접 기술할 수 있고 각종 모델로부터 자동 생성할 수도 있다. 이 논문에서는 후자에 초점을 두고 데이터 플로우 모델에 사용된 블록들을 클러스터링하여 태스크 코드를 생성하는 기법을 제안하였다. 이것을 위해 블록 클러스터링 알고리즘은 주어진 클러스터의 크기로 블록이 묶일 때까지 블록의 수행시간 정보를 고려하여 함수 병렬성을 최대한 보존하며 블록들을 묶어나간다. H.263 코덱 예제를 이용한 실험을 통해 제안하는 방법이 다양한 클러스터의 크기 조건에 대해서 다양한 클러스터링 결과를 제공함을 보였다.

• Proceedings of the Korean Society for Technology of Plasticity Conference
• /
• 1998.03a
• /
• pp.126-129
• /
• 1998

Proper design of blocker dies is one of the most important aspect of impression and closed-die forging to achieve adequate metal distribution. Determination of the blocker configuration is a very difficult task and is art in itself, requiring skills achieved only by years of extensive experience. To save the cost and time of blocker design, many methods using computer were proposed. In this research, low pass filter method proposed by Oh etc. was applied to blocker die design of spoiler support, part of aircraft and plasticine model experiment of closed die forging of spoiler support was accomplished to verify the validity of the blocker designed.

• The Transactions of the Korean Institute of Electrical Engineers D
• /
• v.54 no.2
• /
• pp.104-115
• /
• 2005

Median filters in the signal processing have been most widely used and have demonstrated the strongest effects. This paper proposes the adaptive median filters with noise detection. The proposed basic algorithm of the filters is to judge whether or not the noises exist on the ground of The Noise Judgment Standards. Just in case the existence of the noises is verified by the algorithm, it takes the median filter. In order to judge the existence of the noises by the algorithm, this paper introduced the noise detection method by local central variance. As a result of comparing and analyzing the features and performance of the proposed filters and the existing [5]-[10] filters on the same conditions, it was verified that the former proved to be better than the latter, Observed even by naked eyes, it was similar, too. Accordingly, it's proved that the adaptive median filters by local central variance are useful in removing the impulse noise of the median filter and reinforce the edge preservation ability.

• Korean Journal of Agricultural Science
• /
• v.12 no.1
• /
• pp.47-54
• /
• 1985

An investigation was made to find regional differences and seed characteristics of buckwheats collected from 36 areas in Chungnam province in 1984, and the results obtained are summarized as follows; 1. Grain types of the collected buckwheats were classified as winged, semi-winged and common types. All collections were on the average composed of 50.1 % of common grain types, 26.8 % of semi-winged type and 23.1 % of winged types, respectively. However, there was a great regional difference in components of each grain type among collections. 2. The mean 1000 grain weight was 24.9 gr. The regional differences in 1000 grain weight showed that a collection (collection no. 30) from Susan was 17.4 gr and a collection (collection. no. 16) from Suchon was 31.9 gr. There wasn't any significant relationship between grain types component and 1000 grain weight. 3. Germination of seeds was accelerated as temperature goes up from $5^{\circ}C$ to $30^{\circ}C$. However, interesting germination pattern was observed. That is, seeds from Suchon (collection no. 16), Hongsung (collection no. 23), Cheonweon(collection no. 35), and Yesan (collection no. 27) showed abrupt decrease of germination rate at the temperature of $15^{\circ}C$. The seeds collected from Suchon (collection no. 29), Dangjin (collection no. 32) and from Chungyang (collection no. 21) showed decrease of germination rate at $25^{\circ}C$. These seeds showed, however, the increase of germination percentage at temperature higher than $15^{\circ}C$ and $25^{\circ}C$, respectively. The germination rate for the most collections at $5^{\circ}C$ was less than 10%. However, seeds from Asan (collection no. 33) and Daeduk (collection no. 3) showed 20% and 30% of germination rate at $5^{\circ}C$, respectively. 4. Color of seed coat could be classified into two maj or colors, dark and dark brown. Based on the seed coat color and grain types, all the collections could be classified into the following six categories: winged-black, semi-winged-black, common-black, winged-dark brown, semi-winged dark brown and common-dark brown. The different light absorption rate was found within the UV light zone (190-390 nm) depending upon the two different major seed coat color.

• Journal of the Korea Society of Computer and Information
• /
• v.28 no.3
• /
• pp.137-148
• /
• 2023

The purpose of this study is to classify the potential types of mental health of mothers of multicultural youth by applying Latent Profile Analysis, analyze the influence of predictors, and find out how differences in potential types affect parental efficacy. To this end, panel data for the 9th year (2019) of the Multicultural Youth Panel Survey (MAPS) were used. As a result of the analysis, first, the mental health types of mothers of multicultural adolescents were analyzed in the order of 'middle risk type of mental health'(class3) > 'high risk type of self-esteem'(class1) > 'high risk type of mental health'(class4) > 'cultural adaptation and daily life stress'(class2). Second, compared to the "class 1" group, the lower the family economy level of multicultural youth mothers, the lower the educational background of multicultural youth fathers (husbands) graduate from middle school, the lower the level of Korean, and the lower the level of communication with children, the higher the odds of belonging to the 'mental health medium risk' group (Ods). Third, compared to the 'middle risk type of mental health'(class3) and 'high risk type of mental health'(class4), the 'high risk type of self-esteem'(class1) group was found to have a significant positive (+) effect on parental efficacy.

• Horticultural Science & Technology
• /
• v.29 no.5
• /
• pp.500-502
• /
• 2011

'Dream Pink', a cultivar of Gypsophila paniculata was newly developed for cut flowers by Jeollabuk-do Agricultural Research & Extension Services. It has morphological characteristics of the intermediate plant type, double florets with many petal and two pistils, emarginate petal tip and campanulate calyx shape. Also 'Dream Pink' had several other traits such as strong flower stalk, deep pink flower color, resistance to powdery mildew and pest injury. Furthermore, 'Dream Pink' produced higher number of nodes, primary branches, longer flower stalk length with long intermodal length. In subalpine area, 'Dream Pink' cultivar showed narrow branching angle as compare to 'My Pink', during the summer cultivation. Blooming in 'Dream Pink' was delayed by 5 days, its florets were broader with more number of petals as compare to 'My Pink'.